If you’re watching this, do yourself a favor and use Tom’s Keys to make your Toyota key. I used the Toyota Keymaker and I got the strange light turned on that he talks about at the end, and I couldn’t get the remote parts working. He’s right that it’s fine fir a valet key. The Tom’s Keys gadget programmed everything really well, it worked with my cheap Amazon keys, and it got rid of that weird light too. Thanks El Chano Jose!
@sollykhan23852 жыл бұрын
where do you get that 'toms' keys from,is it a programmer ? or different set of keys ?
@runyoudown17913 жыл бұрын
Все отлично рассказал! Чтобы погасла лампочка охраны нужно оригинальным ключём 5 раз включить выключить зажигание
@chupikz2 жыл бұрын
that is the security indicator light, the flashing means that its not armed, park the vehicle and turn the key from on to off five times ending with OFF, remove the key then start it and see if the light remains off. This has worked for me after programming new key I had the flashing light issue. Hope this helps someone.
@rakh83923 жыл бұрын
Thanks for this. QQ. So don't unplug it before turning it to ON 5 times? Or unplug it and leave it out while you turn it to ON 5x times?
@MarkMc702 жыл бұрын
All right. This guy talks prices.
@MorrisDugan4 жыл бұрын
Jose, what model and year Toyota is that? From the video, it looks like it will program an unprogrammed key, but it will unprogram a programmed key. I don't like that new flashing security light, though. I wonder if someone has posted instructions for making one of these key programmers. I suppose, though, that there's an internal chip with software to interact with the car computer. My 2006 Scion tC uses the same transponder key as a friend's 2008 Toyota Matrix, but I can program new keys using the procedure where you open and close the door 5 times, but that won't work on the Matrix. (The pressing-the-pedals routine doesn't work, either.) The Smart Keymaker is supposed to work on the 2008 Matrix, which is why I bought one and am now looking for the right instructions.
@god-son-love Жыл бұрын
That light is the SEC light (security light) You can remove the error code with OBD2 reader.
@dashtyATG4 жыл бұрын
Thanks for your support and time. Dose it work only on toyota?
@elchanojose4 жыл бұрын
Hello Dashty! This component works only in Toyota. But you might find other products on the market that are for your car or other cars. Take care Dashty!
@mesutbarmani3446 Жыл бұрын
hello thanks for everything, i still have a question. now the device has come i put it in the obd then waited it beeped the whole time, now the indicator light of the immobilizer does not go out, could the control unit have broken?
@phillipchan964 Жыл бұрын
To clear that security lights flashing, you need to insert the master key and turn to ignition 5 times with less than 5 seconds. It will clear the code.
@west_park7993 Жыл бұрын
yeah. i did. now the original master key is not recognized
@phillipchan964 Жыл бұрын
@@west_park7993 Most of the 2000s toyota vehicle are programmed for two master keys only. That's meant one of your key is being deleted from the systems. You can program your master key back by doing the same way. If you want more than 2 keys, you need to clone it.
@CHIBA280CRV Жыл бұрын
Very informative gracias 👍🏼👍🏼👍🏼👍🏼👍🏼
@dannyjensen49543 жыл бұрын
Thanks so much. Great video.
@elchanojose3 жыл бұрын
Thank you for watching our video. Take well care Danny!
@Manzanillo-bl2gk3 жыл бұрын
I would like to know if I can program a key for my 2005 Toyota Corolla, but the only key I had (original key) I lost. I can do this?
@kemiost553 жыл бұрын
Do you have a key using right now for your car?
@ChrisMak13 жыл бұрын
How were you able to clear the transponder keys from the ECU? You mentioned disconnecting everything. Is there a way to do this by disconnecting the ECU, or did you use an OBD-II cable and TechStream?
@sollykhan23852 жыл бұрын
you have to use a paper clip and connect terminal 4 unto terminal 13 on the OBD socket, and leave the ignition ON for 30 minutes, however before you do that, disconnect the battery, (the main earth side- NEGATIVE terminal) and using a jumper cable connect the positive cable of the battery to EARTH,remember the other earth (negative cable) MUST be disconnected whilst you're doing this,this will dissipate all the charge in the system and flatten the capacitors in the ECU, do this for about 5 minutes, then proceed with the 1st part of this instructions (reconnect the earth cable back on) 1st, once all this is done, your ready to reprogram the keys.
@ChrisMak12 жыл бұрын
@@sollykhan2385 Thanks for the reply, I think I ended up doing this using TechStream but it was almost a year ago already, so I can't even recall anymore. Either way, I now have two working keys and remotes.
@sollykhan23852 жыл бұрын
@@ChrisMak1 so glad it all worked out well, shame it took so long for anyone to notice your post, take care, and THANK you for responding to my concern, take care, Bless🙂
@adugyamfi9453 Жыл бұрын
Please is for Toyota or you can use it for any car. ?
@elchanojose Жыл бұрын
Hello Adu! We use it only in our Toyota Camry but have not tried on other cars. So far we have programmed 4 keys to our Camry and save lots of money with this device. Take well care Adu!
@ja-wj9qy4 жыл бұрын
Thanks you man that's help me
@elchanojose4 жыл бұрын
Hello Jack! I am glad that this video was much help for you, take care Jack!
@Lezith4562 жыл бұрын
Hola Jose: Si quieres hacer 3 copias como lo harias? Gracias!
@pente19822 жыл бұрын
Thanks a lot
@elchanojose2 жыл бұрын
Hello Manuel! Thank you for taking your time to watch our video. Take well care Manuel!
@alexllinas61854 жыл бұрын
Despues que termines tienes que meter 7 veses y sacar la llave poniendo la llave en on para que siere el ciclo de programacion
@pente19822 жыл бұрын
Lo hice tal cual lo hizo y funcionó perfecto
@ousmanabdraman4 жыл бұрын
C est bon mon chef
@west_park7993 Жыл бұрын
RAV4 2010, dot on the original blade. Bought 2 keys from ebay. Seller said, chip is 4D67 and will work. When you plug the obd keymaker, the computer goes into solid red SEC programming mode. Very difficult to get out of programming. In your clip, as soon as you removed the key, the SEC light goes off, but in mine, it stays on. I tried to turn it off by quickly turning the original key on-off a few times, and now the car will not start with the original key!!! All online instructions I found: All keys are lost, you must press the LED button constantly. Can anyone tell me where is the ???? LED button? There is a LED light on the keymaker, but no button to push. Any help will be appreciated.
@nicholashenry50152 жыл бұрын
According to what I read online the device can also program the remote side
@lilfacebook34244 жыл бұрын
Illuminate watching you 👁
@Octubre-zb4xc Жыл бұрын
Hola , donde se podrá comprar en Guatemala o México ??? , solo es para Toyotas
@elchanojose Жыл бұрын
Ola Octubre! Este componente lo puedes comprar en Amazon y es para programar llaves Toyota. Saludos Octubre!
@nfm4284 жыл бұрын
Hello. I tried to program my 2007 corolla and it did not work for me. I posted the video on my channel.
@mesutbarmani3446 Жыл бұрын
I no longer have the original key, is that also possible?
@elchanojose Жыл бұрын
Hello Mesut! As long as you have a working key to turn the car on it should work. Take well care Mesut!
@mesutbarmani3446 Жыл бұрын
@@elchanojose I only have one key without a chip. and i tried it it beeps continuously
@henrypowers98703 жыл бұрын
Any hope to stop flashing security light?
@batbuyandambasuren53764 жыл бұрын
Hello.This can program a Toyota Prius smart key to?
@elchanojose4 жыл бұрын
Hello Batbuyan! What year is the Toyota Prius? Thank you for visiting our channel and take well care Batbuyan!
@عمادعبدالله-ق7ج3 жыл бұрын
Good iob my sir
@sanglegend31993 жыл бұрын
Work for avanza 2017 or not
@alexandercruz38054 жыл бұрын
👌
@jyotisingla69313 жыл бұрын
will this work with 2009 toyota matrix
@jasonpriestley36784 жыл бұрын
Does key maker work if all keys are lost u have no keys
@jasonpriestley36784 жыл бұрын
Does key maker work if all keys lost
@elchanojose4 жыл бұрын
Hello Jasón! I have not yet run in to that situation but it works. The only thing is that the new key has to be cut and that is why you need on car key to get the right cut so it can turn the ignition. If you have no key to copy the new one, how are you going to turn on the ignition?
@kurty-allenresiere48814 жыл бұрын
@@elchanojose If you dont cut the blank key before programming, it should turn the ignition on. A locksmith can cut your blank "uncut key" if you remove the driver side switch and take it to him.
@StrayEyeStudiosInc3 жыл бұрын
@@kurty-allenresiere4881 if there's a cylinder on the passenger side it'll be on there
@ajokunciofficial8 ай бұрын
camry chip berapa???
@abelinoromano48125 ай бұрын
A donde lo consigo . Me puedes dar el link para buscarlo en la tienda porfavr
@affordrentcar50214 жыл бұрын
Where can I buy this Toyota key maker? Thanks
@elchanojose4 жыл бұрын
Hello Afford! I bought mine from eBay, but there are a few option to buy it from online. I saw it in Amazon also. The price is also different depending where you buy it from. Take care Afford!
@kumeytzaey64834 жыл бұрын
This can program a 2012 Toyota rav4 to?
@elchanojose4 жыл бұрын
Hello Kumey! Yes, you just need to get the right key for your car and have it cut. With this tool you can program your new key. Take care Kumey!
@ZakiZakiyou8 ай бұрын
I need help to know seconds key
@tingkonghock43592 жыл бұрын
I wan to buy this item do you have this item?
@elchanojose2 жыл бұрын
Hello Ting! I borrow this item from a friend and after I saw how much I saved by programming my own keys, I bought one for me. It has been a great investment. Take well care Ting!
@johnnygoode30214 жыл бұрын
HOW YOU KNOW HOW YO GET CORRECT CHIP KEY?
@elchanojose4 жыл бұрын
Hello Johnny! First of all thank you for visiting our channel! What car is the one you need a key for? Getting or buying a replacement key for your car can be very confusing do to having lots of sellers and different keys claiming to fit or work with your car. First, compare the shape of the key you are buying to the original key of your car. Second, on the description when buying a key make sure the seller or the place you are buying that the key fits and works with the car and model you own. You don’t have to buy the most expensive key for it to work. Try to match the description of the seller to the car you own. Let us know if we can help you further about the key for your car! Take care Johnny!
@johnnygoode30214 жыл бұрын
@@elchanojose I have a Celica 2000 gts. I LOST THE ORIGINAL KEY, SALUDOS paisa.
@dmtrsnn4 жыл бұрын
Hello my friend. I have toyota yaris d4d 2010 how can I program it?
@dashtyATG4 жыл бұрын
That's how you turning it off thank you kzbin.info/www/bejne/n2K5pqOFm9Geh6s
@fajraouisghair17173 жыл бұрын
Bad produit for 4c corolla 2004
@west_park7993 Жыл бұрын
ultimate piece of garbage. if i program 1 key, the other key is deleted. or all are deleted. no one has posted clear and understandable instructions. i am returning mine to walmart.
@lobuenoylomalo.94774 жыл бұрын
All you have to do going to locksmith with the original and pay 15 dollars....lololol. You uses the immobilizer went you lost all keys TARTA..TARTA..LOLOLOLO
@Gigantortacoma4x44 жыл бұрын
This device only works on old Shitbeater cars. New Toyota vehicles 2012-2020 keys need to be done at the dealership.
@postingid32143 жыл бұрын
WRONG! You can buy an OBD port programmer for Type G or Type H keys; OR......... you can buy a VCI mini cable and use Toyota Techstream software with a laptop. Both of those options are cheaper than going to the stealership!
@thomsonkev3 жыл бұрын
False! I used Techstream and VCI mini cable to do mine at home.
@StrayEyeStudiosInc3 жыл бұрын
Hey guys look another know-it-all
@Gigantortacoma4x43 жыл бұрын
@@postingid3214 How about telling people what year your car is? If you want your key to work EXACTLY like the original one with all the functions to open the trunk and operate the alarm system you need to have the dealership program a new key. If your driving an old shit beater and don’t mind driving around with instrument lights flashing then go ahead and buy this.
@postingid32143 жыл бұрын
@@Gigantortacoma4x4 ***LMAO*** "TRIGGERED!!!" btw: the wife's car is a 2011. I paid a locksmith $25 to program it. I got the key from Amazon for $18 and Lowe's cut it for free. (I got it cut before I had it programmed)
@icedcoldkilla3 жыл бұрын
Some people complain that the security light stays on after programing. Is there any fix to this?
@sollykhan23852 жыл бұрын
yes, put black pvc tape over it !!🙂
@nfm4284 жыл бұрын
Hello. I tried to program my 2007 corolla and it did not work for me. I posted the video on my channel.
@nfm4284 жыл бұрын
Hello. I tried to program my 2007 corolla and it did not work for me. I posted the video on my channel.