I looked at my directions, went to the Chamberlain site, checked 3 other KZbin videos without success. I saw your video and POOF by your telling me about the learn button, you saved me from a nervous breakdown. Thank you a million times over!
@LeFamily4293 жыл бұрын
Thank you for pointing out the number of time you have to press the remote key for different brand of garage opener at 22 second mark. Unfortunately, I lost the manual. Genie requires 6 presses
@mylittlesongbird12 жыл бұрын
I lucked upon this comment because after watching more than several videos that didn't help me, this one was actually great, but I skimmed past some of the beginning the first time I watched it.🤦🏼♀️😻💖 I saw your comment and went back to rewatch. Such good information!! Thanks so much! I have Chamberlain green, 4 presses!😘💚💚💚
@TheG9852 жыл бұрын
Agree. I’ve been trying to get a overhead door programmed for 35 mins and saw your comment. Thank you
@TKV553 жыл бұрын
Thank you, sir! Needed to reprogram my remote but tossed my instructions a long time ago. Lol. This was most useful.
@susieq73286 ай бұрын
Better than the official Chamberlain video. Thanks!
@lexgeroux96253 жыл бұрын
awesome video I did exactly as you showed! and it worked right away thanks 😊
@kimi000403 жыл бұрын
Thank you so much for the video. Your video was the easiest to do and right to the point! Highly recommend this video if anyone else needs help.
@manleycameros96114 жыл бұрын
Thank you sir. Your video is better than the instructions and all other videos on KZbin!
@ChristyTurnerAuroraMedia2 жыл бұрын
Sweet action! Took like 1 minute once I read I had to push button 5 times for Genie style. thank you for simplifying this for me!
@Katakagara2 жыл бұрын
You rock !!! Red button on chamberlain = 2 clicks! 😊👍🏻
@SolisDigitalMedia3 жыл бұрын
I double-liked this with two accounts as a THANK YOU! I went to various videos and it worked on yours on the first try! Thanks GDG!
@GarageDoorGuidance3 жыл бұрын
Thanks ! (:
@garyscoggin55064 жыл бұрын
Worked great. I searched all over until I found this video. Thanks!
@ryannotbryan86874 жыл бұрын
Thanks for the help bro I really appreciate you making a simple video on this
@utahyork3338 Жыл бұрын
Yesterday I had to install a new logic board and I could not get one of my universal remotes to program correctly. I push the button to light the blue light on the remote, then pushed the purple learn button. When I tried to program the remote button, the blue light would go out after pushing the right or left button just once. I could not get it stay on until the third push. I ended up removing the remote battery for 5-10 seconds, re-installed the battery and the remote programming process started working as normal. All is well now.
@thepsychicspoon5984 Жыл бұрын
Holy crap. No other video tells me about the learn button inside. Much appreciated.
@jackiefeye517611 ай бұрын
Best instructions I found .. quick and easy!!
@Pappy633 жыл бұрын
Thank you for talking the time to create and post this video. It worked!
@mighty_son40864 жыл бұрын
In doing this process right now and it’s not responding 😫 please help!!
@MissCamille992 жыл бұрын
Thanks for this simple video! It worked the first time!
@noodlez1112 жыл бұрын
Thanks for this video… I watched the company’s video and it wasn’t as helpful
@kimberlysmith7625 Жыл бұрын
Wow! So easy! Great tutorial......thank you!
@karaoke8882 жыл бұрын
Prefect directions. Thank you!
@LeonSheeter3 ай бұрын
Can't even recall where / how I got this one little garage door remote opener... But it's got the 'coin-battery' on the inside, & it contains 2 main activator buttons at the top portion of the device, & then the bottom section contains just 1 single button as well as this panel of 12 itty bitty little switches with the very 1st switch (1) labeled with 'on' above the number 1... & then numbers 2 -11 are just labeled numerically with the 12th switch containing, just like number 1's 'on', shows the letters: "KE" above the 12... I wonder how exactly I'm supposed to go about syncing it up to use with my older craftsman opener..I'm pretty sure I USED to have it programmed at one point just fiine but I can NOT recall how I actually did it ...
@GarageDoorGuidance3 ай бұрын
On the opposite side of the switches is there a little black circular button? ( it would be under the cover if you have the cover on
@susantull172 Жыл бұрын
I followed the instructions but still not working. Wonder if the garage door opener is broke. Initially it worked fine then the remote had to be pushed multiple times for it to open then it stopped working completely. The remote works for our second garage door opener
@GarageDoorGuidance Жыл бұрын
Sometimes the receiver in the units stops receiving and you need a new board or new unit at that point
@susantull172 Жыл бұрын
@@GarageDoorGuidance Okay thank you
@rogeliorodriguez8944 Жыл бұрын
Does this remote work for a garage brand lift master
@GarageDoorGuidance Жыл бұрын
Yes
@astropilotred4 жыл бұрын
Great easy example, thanks 👍 I’m using it to open a gate, gate fob light shows red so I did it twice, hope it works! Now to drive to the gate and see.
@will1andonly3 жыл бұрын
Thx bro. Very easy instructions you gave. I appreciate it. KZbin ftw!!!
@melaniefortman98842 жыл бұрын
thank you! the instructions that came with mine were confusing as all hell. this made it easy!
@lingjingnieh71892 жыл бұрын
Hello, thank you for the video. I am wondering how can I pair 2 universal remotes? So I can have one remote for each of my car. Thank you.
@GarageDoorGuidance2 жыл бұрын
Follow the same procedure for both, have you tried yet ?
@haroldwhitneyjr99933 ай бұрын
Thanks 👍🏾
@RayshellChill3 ай бұрын
Thank you for the code list on the type of garage opener you use. No one else I watched had this. Thank you thank you thank you
@trumpetpuppy683 жыл бұрын
Ugh mine doesn't work. I have this same remote but my opener is a wayne dalton and it just won't connect
@GarageDoorGuidance3 жыл бұрын
If it’s the Wayne Dalton Quantum, you need an original unfortunately :/
@CitizenX1981 Жыл бұрын
Thank you
@drakepat71832 жыл бұрын
You just saved me 70 bucks.. I THOUGHT my remote is broken cause it just suddenly stopped working :)
@GarageDoorGuidance2 жыл бұрын
Send half my way 😂 kidding haha
@albertmazumder32103 жыл бұрын
It wasvery easy to programing. but I have a problem,which is it works from inside but it doesn't work from outside, how can you help me to fix it
@GarageDoorGuidance3 жыл бұрын
Check if there are any LED lights in the opener or around the opener. Those can affect the range for sure
@willusa_oficial2 жыл бұрын
Tks man. Help a lot in a second
@HB-yq8gy4 жыл бұрын
Thank you awesome video. I finally got it with your video!!
@berkeleypowell44533 жыл бұрын
Thank You it worked and my Wife is very Happy
@annarogers7646 Жыл бұрын
I tried to do what the instructions said.they left out the part to open and hit the settings on the inside. Worked first time 🙏
@dawnb74572 жыл бұрын
I didn't understand the written instructions...this was great!
@raybsmith62674 жыл бұрын
How do you program a genie garage door opener with a black learn button
@shellyford83303 жыл бұрын
Thank you so much it was a breeze to program thanks to you. I was wondering if you had any videos I could watch to program button two for my automatic gate? It is lift master brand also the motor is SL3000
@GarageDoorGuidance3 жыл бұрын
You just need to find the learn button on it. I’ve done it before but don’t run into enough of them to be able to make a video on it
@raybsmith62674 жыл бұрын
I have a genie 1035 with a black learn button, trying to program a chamberlain universal remote having major problems
@GarageDoorGuidance4 жыл бұрын
Have you called genie? I know their help line is a pain in the rear but I’ve also had problems programming to similar model numbers on the genies
@lisaromero4563 Жыл бұрын
I've been trying to program mine and it's not working. I have that sane remote and garage is 2002 so if I'm reading correctly should only click twice?
@GarageDoorGuidance Жыл бұрын
Correct, it is a very good chance your receiver is dead on the logic board if it’s not taking. Do you have any other remotes or keypads that do work ?
@PoetandProfessor2 жыл бұрын
Please help me program my lift master to open my garage. It was opening and now it’s not. I have the lift master opener that was at the property I moved in. Don’t know why it stopped working, but I need to get it opened. Can I use the lift master I already have? or do I have to get a new one? Please let me know. Thank you.
@GarageDoorGuidance2 жыл бұрын
Have you tried to change the battery on it? Once that’s been covered you’d want to reprogram it if it isn’t working after a new battery. Steps shown in this video for a universal remote kzbin.info/www/bejne/a5uXpKFnr7aArqM
@nalaqnalaq8382 Жыл бұрын
Uh-huh.... What if you have a Doorkeeper garage door opener? There are NO buttons on that unit. The remote we have is a Genie; so, there MUST be a way to do it.
@GarageDoorGuidance Жыл бұрын
For a unit that old you likely have the dip switches? In which case you would be looking for those, matching the sequence on an older clicker remote that still has the dip switches and programming from there but there are a lot of variables here I just can’t guide you one way or the other without seeing it 🫤
@tmw04113 жыл бұрын
Thank you so much! It worked the first time!
@maryjobrokering93092 жыл бұрын
oH MY GOSH! sO SO VERY THANKFUL
@blakeblake88442 жыл бұрын
Thanks for the video it helped me out a lot
@carmenmazurek387229 күн бұрын
Thank you for your clear instructions. You rock!😊
@coatingkings4 жыл бұрын
@garage door guidance worked like a fkn charm 👍👍
@derekwilson3843 жыл бұрын
So i programed 2 remotes to two diffrent doors . now when i press the button both doors open. How do i get only one door to open with its assigned control
@GarageDoorGuidance3 жыл бұрын
You need to erase and reprogram It so they’re only programmed to the one. Did you use the same button on the remote control for both doors ?
@jon264224 күн бұрын
My light just clicks and turns on and off about nine times. The door won't open. Help!
@GarageDoorGuidance22 күн бұрын
Is the lock on ? On your wall control there’s a lock button you want to hold it for about 3 seconds
@willbee65912 ай бұрын
I have a Marantec 370 which does not have any colored button on the opener. Both my remotes are kaput, so I bought a universal (Chamberlain) but without the colored button, I do not know what to do. My opener has a "P" button and a "+" and "-" button and a small LED screen. Do you have a video to help with this? Thank you.
@GarageDoorGuidance2 ай бұрын
We unfortunately ( maybe fortunate for us haha ) don’t run into many marantec openers. Your best bet is to try to locate a manual online
@willbee65912 ай бұрын
@@GarageDoorGuidance ; that's a surprise. They are sold by Precision Garage Doors, which seems like a pretty big company, around here at least (Seattle, WA).
@kimberlyjones43004 жыл бұрын
Ty ty ty!!! Your tutorial helped me so much better than the directions included w/remote! Craftsman wanted $80 for a replacement remote. Again, ty! You just my evening less stressful!
@GarageDoorGuidance4 жыл бұрын
Happy to help !
@tophertackman74242 жыл бұрын
I appreciate you and this video, man. Nought a house with a door opener, but seller could not find theirs. I ordered this from Amazon, and you taught me how to program it like a pro! Many thanks.
@timeisnow334 жыл бұрын
Your other remotes didn't loose connectivity right? Its just that you added new remote to your existing setup and it works now along with other remotes?
@GarageDoorGuidance4 жыл бұрын
Yep Sorry for the late reply, haven’t had access for a while
@clayhaddon39683 жыл бұрын
Thank you this was a big help thanks
@shaylaurizar91082 жыл бұрын
Thank you! Your video saved me today !
@PuroNewMexico5754 жыл бұрын
Thank you. so easy with you. Tanks 👍🏽👽
@justjoannaeverydayhappenin29382 жыл бұрын
Watched the video and followed the color coding and voila within seconds the door opened. Thanks so much!!!
@GarageDoorGuidance2 жыл бұрын
😄🥳
@jamiroquai302 жыл бұрын
Did this it works but only opens won't shut garage door
@GarageDoorGuidance2 жыл бұрын
Have you checked the safety sensors?
@tijuanrobinson52018 ай бұрын
OMG i should have watched this Video first. I spent an hour trying to do what another video was telling me to do. Thank you so much for this!!!
@fifteenfofifo2 ай бұрын
Took 10x longer to pull the car out and put up the ladder than program. Perfect instructions.. thanks for the screenshot of the opener training buttons too.
@tinafields143 жыл бұрын
Very helpful thank you so much
@stacy_geraghty Жыл бұрын
With my mastercraft remote I don’t have a “learn” button underneath the cover like you
@GarageDoorGuidance Жыл бұрын
Craftsman? It’s gotta have a learn button somewhere on the head
@1beachmama Жыл бұрын
Every video always shows just programming ONE BUTTON! But never the second door button. When we have tried to program the second door, then both doors open together and shut together. Also the doors will randomly open with no one doing anything with the remote and unknown to us. Any info on that? Show programming BITH BUTTONS please!
@GarageDoorGuidance Жыл бұрын
Hello, what opener(s) are you doing this with?
@1beachmama Жыл бұрын
@@GarageDoorGuidance We are using a Chamberlain but I think we’ve ascertained that the doors are too old to be compatible and the circuits aren’t working properly. The doors opening and shutting on their own is really puzzling and a real problem! And even the one while it was locked!! She thought that someone else’s must be opening it but we don’t know. She’s going to purchase new openers now. Thank you for responding.
@GarageDoorGuidance Жыл бұрын
@@1beachmama it’s probably what I’d recommend anyhow, hope it gets sorted soon!
@bobbarham61193 жыл бұрын
👍
@DrKondrup Жыл бұрын
worked on it for 45 minutes then I watched your video and got it! thanks
@brianmulhern4172 жыл бұрын
Awesome Easy thanks
@vincesilva11282 жыл бұрын
I really appreciate your work.
@travelbug1902 жыл бұрын
I have a Chamberlain universal remote to program to an old Wayne Dalton door. Not sure what button to look for on the door opener machinery
@GarageDoorGuidance2 жыл бұрын
Is it a Wayne dalton quantum ?
@MJ690902 жыл бұрын
@@GarageDoorGuidance Mine is and I bet you're going to tell me it doesn't work. 9 button pushes later and nothing happens. Mine is a Quantum 3000
@GarageDoorGuidance2 жыл бұрын
The Wayne Dalton Quantum requires the original remote
@1105pitbull20 күн бұрын
so, just pushing the button once doesn't wipe out the opener code? what does?
@GarageDoorGuidance20 күн бұрын
Holding it down for about 7-8 seconds
@HasnainZubairi Жыл бұрын
I did same thing and its opening the door but its not closing it
@GarageDoorGuidance Жыл бұрын
Safety sensors may be tripped or misaligned
@shelivesyoga3 жыл бұрын
Thank you!!
@dillpickle21859 ай бұрын
My program light turns off anytime i hit another button....
@GarageDoorGuidance9 ай бұрын
If the remote programming light turns off as soon as you push a button then you likely need to replace the battery
@queenbaby9111 Жыл бұрын
Easy tutorial but I can’t get it to work from outside help
@GarageDoorGuidance Жыл бұрын
Any Led lightbulbs around possibly causing interference ?
@subhajitpalit3 жыл бұрын
very brief and very helpful !
@tracyhall46102 жыл бұрын
Awesome instructions!!!
@marcellawallace63804 жыл бұрын
Great help! Thank you!
@Idahoborn663 жыл бұрын
what about the second button for a second garage door?
@GarageDoorGuidance3 жыл бұрын
Same process just use the other button and corresponding frequency
@mikejohnson81934 жыл бұрын
Man, thank you for the video. I was making it way harder than what it needed to be.
@amylee19714 жыл бұрын
Thank you this is the only one video that I watched that I could get my clicker to work yay
@mikhaillopez87312 жыл бұрын
Thank you
@peppergirl74252 жыл бұрын
Thank you!!
@casacolibri92 Жыл бұрын
I watched this video, confidently went to the Home Depot and bought two double clickers for my two garage doors. I had only one clicker for each garage door and I wanted a clicker for each of our cars. Took five minutes to program the two clickers! Easy peasy! This 68 year old lady thanks you, very much!
@hilariocarrillo12509 ай бұрын
I have NO learn button on the main box with the lightbulb
@GarageDoorGuidance9 ай бұрын
The older openers may be on dip switches in which case you need a compatible remote
@carmenroces28894 жыл бұрын
It works, thanks, easy to follow..
@CathyB-qq5tk7 ай бұрын
OMG, How simple was that!!!! I did it! Thanks.
@rr8960 Жыл бұрын
Thank you for your video. You made it easy to get our remote up and running!
@ibeastinvesting86524 жыл бұрын
Thank you!!!
@marcrodriguez28904 жыл бұрын
Can you program it to the vehicles with this remote
@GarageDoorGuidance4 жыл бұрын
Yes
@anz67224 жыл бұрын
How do you program a second door to the same remote?
@GarageDoorGuidance4 жыл бұрын
Same process but with the other button Sorry for the late reply, haven’t had access for a while
@jeremywilliams44934 жыл бұрын
I have the same remote
@gonzogonz9157 ай бұрын
Thank you!
@maggieflemming85413 жыл бұрын
How do I get the door to go down.? It's linear. Goes up
@jtsobh23228 ай бұрын
What about the one with a dipswitch?
@GarageDoorGuidance8 ай бұрын
You need a specific remote for the one with dip switches, I’ll have to make a video next time I run into one
@wendellstamper5232 Жыл бұрын
Thanks!
@janicevaldes9163 жыл бұрын
Will this work for genie?
@GarageDoorGuidance3 жыл бұрын
Yes it would
@bobbygutierrez9191 Жыл бұрын
Yes!!
@lorilee3966 Жыл бұрын
Worked perfect the first try, thanks!
@elsyr.942 жыл бұрын
Help it opens but does not close??
@GarageDoorGuidance2 жыл бұрын
Have you checked your safety sensors? If you hold the wall button does it close?