Universal 4 Button Garage Opener Remote by Genie Programming Video

In this video we show you how to program the Genie 4 Button Universal garage door opener Remote with not only Genie garage door openers but as well as Liftmaster®, Chamberlain® & Craftsman® yellow button garage door openers, as well as dipswitch garage door opener programming.
#universal #universalremotes #DIY #programming #garagedooropeners

[@Kennymo1111]

I still can’t program the garage even when following the steps

[@GenieCompany]

Reach out to us at 1-800-354-3643 Thank you

[@red_statestorms8784]

Now I know why the installer did not want to program this remote. Totally complicated.

[@sugoi4983]

Then I wouldn't trust that installer lmao, sounds like he needs to choose a new career path or retire

[@Miktroopr]

First try didn’t even have to watch the whole instructions for my brand

[@evolvingsteve9742]

Dipswitch section was very helpful! Thank you!

[@ForReal104]

The box said EASY TO USE so I bought it. BULL BUTTER!

[@GenieCompany]

Sorry to hear you are having trouble with the remote. You can contact Genie customer service at 1-800-354-3643 for programming assistance.

[@mr.bigstuff2419]

I got it to work on 2 different garage doors with different brand openers! Just watch some different videos and follow the steps. I even got it to work with my homelink in my car!

[@theresewickham8861]

So it took 3 methods to program our garage door openers. Thank you for putting this video out. I was working prior to this video for weeks with the written instructions. Less than 30 minutes for 3 remotes and 3 garage doors. Thanks again.

[@raleishari9485]

I got it I got it !!!!🎉🎉🎉

[@peterlabelle2579]

Tried complicated procedures repeatedly on Liftmaster operators with yellow and purple learn LEDs. After failing multiple times, I noticed button 2 I was using when programming the opener with purple LED worked on the operator with the Yellow program light. The instructions for this "universal" remotes are long, convoluted, and wrong.

[@ShadesByDreca]

i love this video took my 2 1/2 hours but I did IT yayyyyy

[@JustChadinTX-bv7yv]

Could you please try a little harder to make a more frustrating and difficult process AND then make the speed of the instructions on the video just slightly too fast for people to actually follow along? Please.

[@Kidjojo3]

I watch this video over 100 times still cannot get it programmed neither one of my garage doors.

[@Kidjojo3]

Whole time is also two hours and a half to reach a tech this is ridiculous

[@Kidjojo3]

The fourth button just shows a solid white LED and nothing else.

[@ramirosanchez7007]

I gave up and threw away upset. Didn't save the box and couldn't get a return. Neither paper nor video instructions worked. Ridiculous!!

[@ziggysway]

@@ramirosanchez7007 i took a break and I got it but the clip is the issue now now to put it on smh

[@felixsoto1671]

I tried it and got it on my first attempt 3:06 shows how

[@MarvR0914]

Thank you for the content. It worked exactly as you demonstrated.

[@tiffiny_aka_tiffiny]

It’s impossible hooking these up! Not quick at all NOT easy haha.

[@GlenDiesel86]

Don’t ever buy any of there products. Watch the video. It doesn’t even make sense

[@red_statestorms8784]

I want to talk to the dipswitch who thought this was a great idea. I usually have no problem programming stuff.

[@Iknowthefirst_random-.3]

Don’t get mad at him cause u can’t do shit

[@echristinebrown7556]

Awesome! I was able to get my remote door opener programmed to my 1993 Genie door after about 3 tries. I had the 12 dip switch numbers turned around. Thanks so much for your step-by-step instructions!

[@maisonmurch8306]

Most households have more than one vehicle… so how do I program the second remote to work? Are we supposed to share one for the whole family?

[@GenieCompany]

You would go through the same steps for each remote, you just do not go through the clearing process of the memory.

[@daveprince8003]

Tried to program it to my opener to no avail….. pissed me of

[@GenieCompany]

Please call us we can walk you through it 1-800-354-3643

[@biggdame21]

Can I program this just with the original remote

[@crushyoprops858]

I got my new universal remote to work but now my old remote isn’t corresponding with the garage opener. I know I shouldn’t have to change the code every time.

[@crushyoprops858]

And cloning isn’t working out for me whenever I try it. Any help?

[@ap2s2k]

Complicating to program. Finally got it to work but it only works when you’re in the garage, which defeats the purpose of the remote. Lol. It has no range at all.

[@GenieCompany]

Typically low range is a result of radio frequency interference, ensure your antenna wire is hanging down and not tucked in the light cover, and if you are using non-Genie LED or CFL bulbs remove them and try again

[@LarryCleveland]

I got it to open but it won't close

[@vits1627]

This thing is a pos

[@EdgeRatedR007]

There is a Liftmaster community gate at my apartment complex I am trying to program and I don't know how since there's no "learn" button for it. My car's homelink copied my original remote and opens it but I don't see anything in the manual about gates. The original remote has dip switches but Liftmaster does not show on the "teach and pair" list.

[@lixosii353]

I have a Genie Pro Max Stealth opener. So I bought this since it's a Genie. So WHY does this video show instructions for Chamberlain and Craftsman???!!!

[@codetony2996]

Range is really short with this remote

[@GenieCompany]

If you are experiencing reduced range, then you may have interference related issues. Please reach out to us so we can assist you further. 1-800-354-3643

[@shattereddimensionsgaming1134]

I solved that issue by splicing a wire from the antenna to the frame of the garage door essentially turning the whole thing into an antenna. Might work for you but I can use this remote from at lease 25ft away from the garage door now.

[@churchmouse144]

Amazingly complex. This is what you get when developers write functionality (not customers)

[@pamelafunderburk7706]

I only have 8 dip switches

[@MichaelPSmith-mp1fk]

did you ever figure out the 8 dip switch? i'm in the same boat

[@romegq]

Love the video. But anyone have the problem where the garage chain just jerks but doesnt fully extend over and over during programming mode (Chamberlain-Purple button)??

[@ALFONSOALBERTOAlfonso]

H Good Morning, Please ... i. How can I program a GU4TR-R /PM 40657R to open my Door King Gate entry ? (318mhz)

[@GenieCompany]

If Door King is not listed on the compatibility list, then it will not work on this product

[@carywheaton1275]

Will this work with linear multi-code?

[@GenieCompany]

This will work with Linear 318 MHz, Mega Code.

[@kevintsui9219]

Will this remote work on an eagle gate opener with 8 dip switches? If so, how do i go about programming it? I didn't see anything for it the instructions. Thanks.

[@shumbane]

Thank you so much for the awesome instructions

[@thewelder5716]

Fun how this seems to not work

[@michaelg.7506]

I’m trying to pair a 10 dip switch remote to this and it won’t pair no matter what way i use, it doesn’t have a learn button

[@GenieCompany]

You will want to check and make sure your garage door opener is compatible. You can see more details here on page 2, chart B. www.geniecompany.com/files/en/programming-dipswitches/4-button-universal-remote . Once you confirm, if you still need assistance, please contact Genie customer service at 1-800-354-3643.

[@bookscheckmout]

Remote failure 😢

[@143mrqz]

Took me less than five minutes, thank you!

[@ziggysway]

Took a long time almost returned it. I have the 12 dipstick Thanks

[@donnarogers2279]

Lift master does it have a battery

[@Haymaker-t5n]

Does this work with linear garage

[@GenieCompany]

Works with Linear garage door openers that use 318MHz frequency with Mega Code technology

[@jareds839]

Doesn’t work with my Q units?

[@GenieCompany]

This will work with Chamberlain models shown on this compatibility list: www.geniecompany.com/files/en/compatibility-chart/4-button-universal-remote

[@jz2779]

I can't get it to work on my My Q Chamberlain unit either.

[@ayanat.miller3929]

Easy Peasy... once I figured it all out! 😂 The key is knowing EXACTLY the type of garage door opener that you have. New owner, so there was no instruction manual, no old remote, nothing! I have a Liftmaster, but the thing that really helped me was realizing that I have an older model with a control panel on the wall inside the garage. The learn (program) button is there!

[@CheriseJohnson-NOAAAffiliate]

Thank you I literally programmed my garage in less than a min!

[@Eggs_And_Spam]

Good to see this up it helps 🫡