How to program Invacare wheelchairs! (MK6i controls)

[@seanmooney3907]

I can see you have a need for speed. I have watched your channel since I was told I have to be in a chair now. I was depressed about it. After watching your channel for several days I am much less depressed. I am much older than you but have a young man in my heart. I find you innovative and entertaining. All the best, Sean

[@TotallyNormal-]

** i say left a lot - but ya can clearly see that im actually pushing RIGHT on the joystick ** hence left = right lol :^) also - i've stopped mailing out SD cards, that was expensive & stuff.. BUT i can just email ya the files to make your own! just use the contact info in video description (free of course :^)

[@JayParalyzed]

There's no way that would handle screen capture -_^, This is one epic tutorial my friend!

[@innersanctumoccultube278]

Absolutely incredible!!! Thank you so much for hooking it up! My Storm Arrow totally flies now! It's obscenely fast... If you're undecided, do it! You're the man!

[@wolterboekkooi7185]

Love your video’s in general, your technical wheelchair repairs and especially this one about software. Keep up your good work, greetings, Wolter (Haren, The Netherlands)

[@GrpaLee]

Love to be able to share with you. You’re very resourceful! And my kind of explorer.

[@HighTen_Melanie]

Subscribed. Oh this channel rocks!

[@PaulyDTheKiwi]

Hi I just watched your video and I’m absolutely blown away with the potential of what my chair is actually capable of lol. I live in New Zealand so I know that sending a card would be pretty much redundant. Thank you for the eye opening video. Pauly.

[@TotallyNormal-]

send an email using the info in the video description - can probably get ya fixed up :^)

[@m7rc0_l13]

Another hint (i'm a powersoccer player), i would recommend you to use the 3rd profile as it is the most accurate and responsive profile. You don't have to but that can help. And the difference can be seen on invacare powersoccer chairs as tdx sp or storm 3/storm 3 ffh.

[@TotallyNormal-]

thanks! yea this particular chair wont be too highly tuned.. its gong to be a demo unit that people can hop into a try it out :^) i dont even want a high end profile on the chair till they get used to it! lol ive got the SD card with the FAST settings, and flash it on when they're ready :^) BTW sent ya an email!

[@jayryan7473]

Watching your video was a blast! Thanks for the info 🙂

[@alexboy1able]

That's a crazy speed, but sounds good. Lol. Alex. From Scotland.

[@compmc]

Excellent Video! Very specific and to the point. Thanks

[@dennisglover9838]

Thanks so much for this video and for providing me with the files that I needed! My chair stopped working a year ago and come to find out it was my joystick which I replaced but the new joystick wouldn't work because it needed to be programmed and I didn't have a programmer and there are no local healthcare supply shops here in Cancun, Mexico where I live that service Invacare wheelchairs, so your video was vital to helping me program my new controller and get me back on the road again. As a footnote I was able to use 2GB regular (non-HC) SD card with no problem. Thanks again.

[@TotallyNormal-]

AWESOME! thanks for the feedback! glad your chair is back up and running again! hopefully it stays that way this time!!

[@TotallyNormal-]

OH.. and BTW for the love of all thats holy... !!! DONT rename your chair in the software!! (there's a field buried in the software somewhere that lets ya give the chair a name) I cant remember if i mentioned that in the video or not.. it causes an insane fault loop that can lock you out of any future programming!!

[@dennisglover9838]

Totally Normal Ok, thanks for the heads up.

[@teriruiz8292]

LMAO "idiot mode"! Man this is sooooo interesting. Love the configurations and reasoning thereof..

[@madisonwentz1961]

Would you mind sharing the steps to turning the Basic to a Pro? I have a 'basic' MK6i card in hand.

[@HellonWheels777]

I wish more chairs had this option...

[@darylehawthorne411]

I have a TDXsp Invacare chair. Would love to be able to program it. How do I get a card with the appropriate software?

[@PhilRacicot]

My mom has a TDX SP with that controller that needs to be made really slow on the indoor mode as she has major issues controlling it. She often steers in the wrong direction and accelerates when she needs to stop.

[@Chris-sb9py]

i have same chair andneed help please. was running took apart . to clean chair .

[@mariaesparza6318]

Quick question,recently got a permbovil M3 power chair, They recommended that I let the power go into the red lights,before charging it again, also they said to do this at least 2 times,this way my batteries last me a longer time, my dilemma is besides been scared to do this, is this actually true or not? Please help since my current chair is broke until they service it in Nov,11. The charger is the one that mounts to the wall or can stand on its own. Hope you can help solve my issue. Love your videos,very informative. Thanks in advance

[@TotallyNormal-]

noooo definitely don't do that! lol to cycle in new batteries ya wanna do quite the opposite - ease them into life.. use the chair 'lightly' for the first few charging cycles - if ya have any 6 mile hikes planned, postpone those for a couple weeks :^) . short version - 1) plug the chair in EVERY night, ALL night 2) don't run the batteries below about 75% (in other words try and stay between 75-100% charge for the first week or so) this may not be feasible, but its just a general guideline 3) NEVER plug in your chair mid-day to 'top up' the charge. the only time this should be done, is if you're stranded somewhere, and you don't have enough charge left to get back the break procedure isnt super critical HOWEVER the only thing ya DON'T wanna do, is run the batteries really low! running them low stresses all the internal components, and generates a lot more heat while charging. (heat kills batteries) new batteries take a while to 'wake up' when new, and going easy on them is the best way to get everything working, and up to full capacity.

[@mikenorris315]

Hey love your vids

[@LieutenantDan-cw7tu]

I have a Amy alltrack M3. I gouges extremely slow . I am sure it was used as rehab chair. How can i remove speed limiter? This chair only goes about 1.5 or 2mph. It has the 4 pole motors

[@sleepyhollow2339]

Awesome thank you for sharing

[@rancelee9480]

Awesome!!!

[@markalwaykitching2748]

How get hold for SD Memory CARD Reader

[@markalwaykitching2748]

How I prow up my 100 Quick Wheelchair what his the Maxi speed for a 100 Qucke wheelchair

[@teriruiz8292]

hahaha, man that's nuts. I'd be barfing like a fool spinning like that. But damn that's cool. I have a pride jazzy HD but I checked and there's no slot opening anywhere for an SD card, :( But yeah I figured it's about as easy as ticking boxes. Must be a hoot to watch you guys playing soccer in chairs! Oh buy hey, does every patreon account always do the deduction on the 1st of the month? Or can each creator setup their own dates for that? I always have to wait for my SSID check on the 3rd of month, that's why I'm asking...

[@TotallyNormal-]

power soccer is a drug for sure!! here's a video ---> kzbin.info/www/bejne/o6rJd6qiaJiCn9E yea patreon is kinda strange.. they bill everyone on the 1st.. no matter when they sign up.. guess its easier for them or something.. but if someone signs up on the 3rd, for example, they wont be billed till the 1st of the NEXT month. seems unnecessarily confusing to me.. and it can't be changed. BTW I didn't feel so hot after that spin for a while hahah

[@michaelchalupa5506]

I am getting hey rovi X3 roof wheelchair. In about 2 months and I was wondering if you have any programs hacks for that chair

[@TotallyNormal-]

rovi is mostly R-Net - so its similar to permobil, quickie, and amysystems for programming.. see if you can get them to enable "On Board Programming" before they deliver it! (FYI they will probably say no.. but its worth a shot!)

[@michaelchalupa5506]

Ty for info. I'm going to buy a caback up camera. I want to know if I can increase speed other then factory settings

[@lynnwyrick7936]

I have a pronto step m51 that I bought that same remote for a replacement can you send me a card for configuration for me please

[@micheal355]

Currently having issues with tdx sp and the seat's mercury switch, resulting in unwanted drive slow down or lock out. Do you know where in the settings we can disable the mercury switch altogether?

[@TotallyNormal-]

easiest fix for that, find the angle switches, and loosen the mounting screws, and change their angle a tiny bit at a time till the problem goes away. theyre usually low mounted on the seat back, or sometimes under the seat pan.. (or both) theyre little black cylinders maybe 1/2" in diameter and maybe 1" long or less, and have a wire coming outta them. typically mounted with a clamp and a single bolt/screw. just make note and take a pic of their original positions - maybe mark with a sharpie, and make SMALL adjustments. if none of that is an option, use the contact form on website (link below) and i can get ya the files to make a programming card. FYI not all invacare chairs have the seating integrated into the chairs electronics directly.. so sometimes changing settings via the SD card wont have any effect. but if it were me, id hunt down the sensors and adjust them a bit :^)

[@micheal355]

@@TotallyNormal- Thank you for the quick response! I'll see if we can locate them. As for adjusting the angles, it has been working perfectly, but noticed today that I was locked out, then in slow, then to green ready status when tilted down much lower than normal. Could we simply disconnect the switches altogether? Seems like they could be malfunctioning. I know they are there for safety but if we can outright disable them, that'd be great. :)

[@TotallyNormal-]

yup! they can be removed.. BUT you'll have to figure out if they're on a normally open, or closed circuit. simply unplugging them may result in permanent slow mode.. might have to connect the wires together. all depends on how the chair is setup. no way to know without trying

[@micheal355]

@@TotallyNormal- I see, very helpful! We'll peak around and try to locate them. I'm not even sure what seating system is even on here, but it's got tilt, recline, lift and power legs. I'm sure we can figure it out, I do have an mk6 programmer to mess with too.

[@micheal355]

@@TotallyNormal- Success! We found that my seating system is from Motion Concepts and located a "tipsy angle sensor." We've got it angled way past the default position now and I have much more freedom! Btw, I may be interested in a professional sd card from you if your offer still stands.

[@FightingMSA]

Sweet video!

[@jjashekki]

Hello! I'm really hoping I can get in contact with you somehow maybe even through this comment. '' My father's wheelchair got miscalibrated with seat angles. Does this method allow you to reset the internal program's seat recline angle? Currently it's reclined all the way back but the program thinks it's all the way upright and we're not able to get the seat in a default upright position. I've been working with a wheelchair repair service but it feels like they're just totally taking advantage of us. They are charging $185 for every time they visit regardless of fixing the chair or not. They said they needed to "assess" and now they're ordering a programmer to change the angle and charging another $240 without any certainty of fixing. They are the only service that will come to take a look/attempt to fix his chair. Extremely frustrating as my father is quadriplegic and can't move around the house in his TDX SP, but I came across this video and would very much like to see if this would be an option.

[@TotallyNormal-]

invacare used a LOT of different seating systems - its hard to tell offhand what could be causing the issues.. and the programmers arent always able to do anything - many of the seating systems didnt actually integrate into the chair's electronics. but its good to check the basics and just visually inspect all the wiring, look for connectors that may have come loose, or pinched/damaged wires etc..

[@bsdkong]

Dude, I just got my rovi reprogrammed yesterday and I already want to speed it up... He set my forward speed to 85% and said I wouldn't be able to handle anything faster... He don't know me too well, do he..... 😆

[@TotallyNormal-]

lol YOU CANT HANDLE THE SPEED!!!

[@haitibenefits4786]

Hey Totally, do you still have sd card available?

[@MARC1TIM]

It looks like the new 2019 versions of these stick are being shipped with version 2.4.13 that looks to be incompatible with the HHP. The new stick his the SD card slot closed/screwed over/removed.

[@TotallyNormal-]

yea - someone sent me a message about that earlier today... i hate stuff like this!! why lock it down?? invacare chairs all use different handhelds.. ya gotta have a whole toolbox full of HHP's to adjust any of the chairs :^/

[@Moosh89]

I just purchased a 2017 Torque 3 which is on its way. It appears to have a joystick like you describe with the SD card slot covered by a bar screwed over. My current wheelchair, 2010 4 pole Arrow has the joystick with the SD card slot accessible like the video. Could I just buy an older joystick like my Arrow for the Torque 3? And can I copy the same file from my Arrow to the Torque 3 as a start point?

[@TotallyNormal-]

I'm not sure about compatibility of the newer chairs BUT its generally not a good idea to try and copy settings from model of chair, onto another. the same settings usually have VERY different results on different hardware... its more work.. but starting from the chair's base programming is usually the best way to go :^)

[@Moosh89]

@@TotallyNormal- Thanks. Hopefully I can access the SD card slot when it gets here to see its current programming or change it if needed

[@chrisfitzchrisfitz5182]

Looks like you were having too much fun showing offlol. Seriously though, i have a Quickie QM 710- no ssd card port, but wondered if there was a way to change the parameters with out having the external comptroller that can be plugged into the charging port(on this chair, i only know of the one port on the joystick- facing out under the box.). Thanks!

[@TotallyNormal-]

I believe those chairs are R-net powered.. so you have to have a handheld, dongle and computer, OR there is an on board programming mode.. some sunrise chairs have it enabled by default (maybe 10% of them) here's a link on how to check if your chair is enabled or not... r-netoem.blogspot.com/2019/09/on-board-programing.html

[@farmboycampbell]

I have the exact same chair and it is stuck in slow mode. Having trouble finding technician in my area. Would you have any ideas to help?

[@TotallyNormal-]

did it start suddenly one day? sometimes the seating position 'sensors' can get knocked out of alignment and cause that to happen.. they're usually mounted on the backrest frame, and/or also under the seat pan, and attached with a bolt - if one got bumped, or came loose it might be the culprit

[@farmboycampbell]

Bought it this way. Has 3 drive modes for inside. I think it is just adjusted slow for the last guy that was using it.

[@debrasizemore9023]

I just bought a used chair just like this for my mother who is 83 years old, it was really taken well care of but for some reason the tires lock up and it barely has any speed on the carpet? do you have any idea why this could be happening and when the tires lock up the little wrench comes on in the display

[@TotallyNormal-]

i always start with the batteries, and make sure they're good

[@lynnwyrick7936]

I'm in a manual wheelchair and thought it was going to be ready for me to plug in and have my electric chair but nope not yet

[@kellytaylor3915]

How or can the Jazzy Elite HD be reprogramed or increase top speed?

[@terryobrien7590]

What does it mean code GB ctrl flt

[@YellowFlash95]

I have ottobock b400 i wish if i can make the go faster, I'm little bit of sad now when i see your speed :)

[@lucilleflores1]

I just replaced my mk6 i but doesn't have to option for me to select tilte/leg /elevat do i need to program it it only has the 1-4 drive

[@TotallyNormal-]

with a new joystick, the settings arent retained.. does the old joystick still work? might be able to connect it back to chair long enough to pull a backup from it. ive added links to all the software in the description :^)

[@fredericthibault-poitras2174]

Hi there having a question i have change my joystick on my invacare arrow storm new MKi6 one when a try to save wheelchair config on sd card error code 55311 any idea to resolve the issue?

[@iufan71]

Is there a way in the programming to bypass the drive lockout mode all together so it will drive no matter angle the seat is in? Thanks

[@TotallyNormal-]

i haven't played around with that setting yet in an invacare chair.. theres a number of different seating systems, that a lot of times they have their own controllers.. sooo short answer.. probably.. but how.. not sure :-/

[@TotallyNormal-]

sometimes its easier to find the lockout signal wire.. or switch, and bypass it manually..

[@tolaten3653]

Totally Normal Hi, I have a TDX SP chair as well with tilt and elevation. However, recently my tilt position was at 26 degree and was locked out (drive lockout). Therefore cannot operate the chair unless I plug out the cables on the actuator? Can you help me? My only wheelchair and without it makes life hard..

[@TotallyNormal-]

theres many different configurations on those chairs that are all completely different.. the best option is to find a dealer or shop in your area - they should be able to adjust or program your chair. good luck!

[@davidbush6583]

@@TotallyNormal- Very vital info given! I inherited a 20-year old "Pass It Forward" Storm tdx3 which now is needed by a family friend's mother. With new batteries installed, the controller screen shows an error code of ATT. The controller looks so well-used that it itself made need to be replaced. With me being a greenhorn neophyte to motorized wheelchairs, just running across your videos was a real eye opener.

[@makcabessa9178]

Hey man thanks so much for the awesome video. Ive been trying to store my controls info on the SDK card with no success. I followed all the steps but then when I open the file on my computer it doesnt have the MK6 file only the original files...... any ideas or suggestions?

[@TotallyNormal-]

do you have a "basic" or "pro" card?

[@makcabessa9178]

I have a basic, is that my problem?

[@TIPMRebuilders]

@@TotallyNormal- I have the basic.... would that explain the problem?

[@chrisdurbin6897]

have an older mk6i with black and white screen stuck in drive lock sd card program is encrypted have any help?

[@chrisdurbin6897]

has the 4 pole motors

[@v1kth0r87]

Hello, could you help me? A friend asked me to help him with an Invacare wheelchairs (in my city there are no chair technicians). His old chair was damaged by the scoters and he wants to use this new one, the problem is the configuration of the MK6-NXC joystick and the DK-PMC28 controller, I was able to format an SD card to be able to load some codes, but the joystick sends the error message "ctrl inhibited", and I don't know what to do anymore.

[@v1kth0r87]

Can you help me with the Professional SD Card too?

[@ktremmy]

Love your channel & I was looking for info on my FDX Invacare chair so figured you might have some info. I'm trying to find out how to override the drive lock out. Do you know anything about that? My chair is 9 yrs old & I needed to replace the control/joystick. There's a recycle wheelchair place near me & they replaced it but as soon as I tilt it goes into drive lock out & I can't drive it unless I'm tilted back a bit because I'm a quadriplegic. They did some fiddling with it but it still goes into lock out at times. It's so frustrating because I replaced it a couple of years ago & I needed them to override the lockout & after that it was fine. How they expect a quad to drive down a ramp without tilting back is crazy to me. Sorry for the long post but if anyone knows anything about this I thought you might.

[@TotallyNormal-]

theres a few different ways to deal with the lockouts (outside of programing) depending on the chair, and the control systems it has.. send me a DM on twitter, and with a few photos we might be able to help figure it out! usually i look for the little micro-switches under the chair and adjust them so they dont trip - invacare typically uses a tilt sensor.. sometimes you can re-adjust the angle of the sensor to make an adjustment.. but you have to be careful doing that, as you might get it stuck in the lockout mode! send me a message and lets see what we can figure out! (messaging links are in video description)

[@TotallyNormal-]

after looking up the FDX, (which i should have done before lol), turns out programing is your only option when it comes to changing the speed/drive inhibitors on that chair... :^/

[@ktremmy]

I talked to another tech there who came out & your right he had to program it & know I'm all set. I don't get why the other tech didn't know how to do this, he was here for almost 2 hours trying to figure it out talking to go Invaders tech support! The other guy came plugged that programmer thing & it took 2minutes tops!! Geezz😬

[@ktremmy]

😀auto correct"to invaders"?

[@TotallyNormal-]

gotta get the right person to show up i guess! glad ya got it sorted out!!

[@Numian]

Hello, is there any way to tune max. speed to go over 15 KPH? Thgank you.

[@kikac565]

Hahah I similarly reprogrammed my F55's. It's a 4 poles beast :)

[@amosgross479]

I need help The battery 🔋 meter is red and has 3 ??? In the meter …

[@shawncarr3439]

How do we get in touch with you to get the files emailed to us?

[@TotallyNormal-]

send a DM on twitter.. link in video description

[@shawncarr3439]

Totally Normal, done and thank you!

[@felipeoliveiraassistencia7849]

Good afternoon I need help, I just made a very serious mistake About the configuration file of Invancare TDXSR - MCG? Elevation and Tilt MK6-GBRWD TT RWD MK6 CONTROLLER - TS1140040 Unfortunately I made a mistake. I inserted the SD card to copy the file, but I selected to read the SD card, and now it says "missing the following on the display press reset " OR MAYBE THE POSSIBILITY OF RESTORING SYSTEM ATTACHMENTS

[@TotallyNormal-]

does your chair have gearless, brushless motors?

[@ethancole4129]

Hi, love the video however this morning my chair displayed a red screen which says 'please set drive configuration' and now it wont do anything 🤦‍♂️🤣

[@TotallyNormal-]

sounds like it somehow lost its programming.. hmmm

[@ethancole4129]

Hi, my chair is fixed. I am from new zealand, how can i obtain the files to mod my chair. Tia 👍

[@jeffreygreen28786]

hey is it still possible for you to email me the files for this ive looked everywhere thanks if you can

[@Ozibuddy888]

hi removalists have delivered my tdx sp chair the error showing is set drive configuration can you advise how i fix this pls help

[@TotallyNormal-]

hey! i haven't personally dealt with that error before.. BUT people have told me on their chairs when parts or joysticks get swapped out, that error can happen. usually they were able to git it going by using a programmer and enabling the correct default settings.. is there a nearby dealer that could look at the chair for you?

[@ito8big]

is it possible to get an IMG of pro card??

[@tammywilson5205]

Is there any way to reach you by phone, we have a wheelchair problem

[@TotallyNormal-]

there is contact info in the video description :^)

[@hueyvue]

today my chair stop working it says "set drive configuration" do you know whats wrong

[@owenminor]

Under the tab: "Calibrations", there is an option for "Drive Configuration". The wrong config will make it drive totally wrong. What model chair?

[@davekleinsasser8507]

Hi, i need a pro sd card or i do have some card could i just copy and paste the files onto it? Could you send me the files please?

[@TotallyNormal-]

send me a DM on twitter with your email address and i can send the files over :^) twitter direct message links are in description of the videos

[@darrylandrews1993]

How can I get the files for a pro SD memory card? I need to re-program a backup Invacare Torque 3 wheelchair. I have a basic card but need the files to make changes from my computer.

[@TotallyNormal-]

looks like i got your email.. ill get the stuff out to ya :^)

[@stevepliakos3339]

I tried to sd read my chairs program and for a second it shows "reading sd and then it goes to the drive screen. Any idea why it's showing me something different?

[@TotallyNormal-]

are you using the mk6i basic card that came with the chair? or did you make a pro version?

[@danielmoses7688]

I'm assuming that this process is much harder with the MK3i SPJ+ electronics.

[@TotallyNormal-]

Oui.... uhhhhh no idea there... lol

[@greg20711]

Oh man, now you're a stomping machine...lol

[@moisestorres9002]

Ready, how do i contact you? Thanks

[@TotallyNormal-]

send me a direct message on twitter.. (with this link ---> goo.gl/irX6gD ) or you can email me - email address is on the 'about' page on my KZbin channel, and click 'for business inquires'

[@ReverendLeonardLucero]

when i turn my wheelchair it reads drive out of alligment , i don;t know what to do

[@TotallyNormal-]

is there an error on the screen?

[@SouthernBelleOrchard]

Excellent Video! We just modified an Invacare TDX SI (MK6I) into a greenhouse trolley and find the turning a bit speedy into the narrow plant rows. Can you send me the SD card or even better the files to put it on a clean SD card? Happy to pay. Can we communicate by email? Cheers.

[@TotallyNormal-]

DM's on twitter are easiest - BUT ive been emailing people the files recently to make a card instead of actually mailing stuff out (easier) send an email with your favorite food as the subject line, and ill reply when i can! (email is listed on the 'about' page under 'business inquiries') i get a LOT of spam and need a way to tell its you! lol

[@mikenorris315]

Hey how can i cam get ahold of you

[@TotallyNormal-]

twitter! here's a direct message link ---> goo.gl/irX6gD

[@wheelz3225]

I bought a 32gb pro sd card would that work?

[@TotallyNormal-]

most larger SD cards have compatibility issues.. BUT sometimes they work! try formatting the SD card with "FAT" if it doesn't work (as opposed to fat32) and make sure the card has no name as well. hit me up on twitter with with a DM if ya need help- good luck!

[@jtflipsi]

Too bad they don't have SD card for quantum 6 edge unless it has it hidden somewhere. I'm wanting to open up the turning speed. Its too slow.

[@TotallyNormal-]

yea.. invacare is the only brand i know of that utilized the SD card programming method...

[@450mijaou1]

@@TotallyNormal- do you know how to program a quantum edge?

[@markpowell939]

Could you please send the card with files on it. I will pay for it!!!

[@owenminor]

OMG. New find in the documentation. Although the overall "SPEED" setting is limited.....There is an "11" dial on the MK6i. The setting 2nd down from the top is "Response". Response is an overall multiplier. Muahahah. Response can go up to 200. MIDPOINT is 100.

[@TotallyNormal-]

nice catch!

[@StarTrooper]

I need a an Arrow Gear-less Brush-less right motor. Its dying & they no longer make them. Screw Invacare. Now i'm trying to decide on an Amy Hybrid or Mid Permo. before this chair dies.

[@TotallyNormal-]

I haven't seen any of the newer amy systems stuff...I'm sure its still decent quality... and permobil is always a good bet.... invacare has kinda been all over the place.. a few decent products, and a lotta garbage LOL hopefully ya get something fixed up soon, and without too much trouble!

[@StarTrooper]

Thanks for the reply. Numotion said they will install a used motor on my chair if I can find one. I'll be testing a Permo soon. I'm not used to mid wheel & I may just force myself to use one.

[@tolaten3653]

Thanks for replying. I realized I stuffed up my Basic SD Card trying to fix thing unprofessionally. >.< and also stuffed up the programming parameters. Now I only have a power wheelchair that goes back and forth lol.. Your post said to hit you up on Twitter for the SD pro files. Unfortunately I don't use Twitter. Any chance you could share with me the SD PRO Card so I can try to reprogram the chair again. I rang up service repair and the cost is over my Disability pension affordability.

[@TotallyNormal-]

my email address can be found on the 'about' page of the channel ----> kzbin.infoabout then click on 'for business inquiries' and email address will come up!

[@jeffreygreen28786]

@@TotallyNormal- it doesn't show for business inquiries for me I'm trying to get the mk6i basic card stuff. Any help would be great thank you

[@basook6116]

too bad that they don't make this kinda program for Frontier....

[@m7rc0_l13]

Oh, and to who else intrusted here's a certified link to get legally any kind of r-net programmer, including oem ones link : powersoccershop.com/programmers.aspx Enjoy

[@stevepliakos3339]

I'll look for one. Thanks

[@Scrazelope]

You keep saying push left. But isn't it push right?

[@TotallyNormal-]

yes lol i realized that after it was too late! do as i do, not as i say! hah

[@jeanmichel7304]

Hey again totally normal. Here are links if you wanted a bumper for your tdx sp. actually these two kits DONT include any back wheel protection powersoccershop.com/steelforcemetalsoccerguard-1.aspx powersoccershop.com/TDX-SP-SIbracket.aspx

[@TotallyNormal-]

HA! just met with an engineering firm last week about mass producing something like this! the ones ill be making are for the M300, and will provide side, and rear protection as well thanks for the links!!

[@innersanctumoccultube278]

Hey, remember me, the speed demon. Well I'm still at it and add luck would have it I just got a Storm Arrow, which means I need one of your cards. Would you be willing to let me shoot you a few bucks to make me one? Maybe email me or give me some way to contact you so we can hook it up, I would be very grateful and have no problem covering cost and plenty coffee. Are you saying the software in the chair already had what's needed? I gotta watch again

[@TotallyNormal-]

hey! so i can just email ya the files to make your own card.. the video description has contact info :^)

[@payitforwardinlife]

Super helpful and very grateful for the info! I would love one of those cards. Can I send you $20 through PayPal and you send me one? That would be helpful. I have a TDX-SR with MK6i controls. I would be very grateful for that. Let me know. Love all your videos man!

[@TotallyNormal-]

send me a direct message on twitter, or find my email address on the channel 'about' youtube page, and click the business inquiries button! ill get ya hooked up!

[@TotallyNormal-]

email sent! .... its coming from a STRANGE email address though! lol

[@aaronwemer4256]

Hey pal I tried sending you a dm on Twitter but it keeps saying message cannot be sent

[@TotallyNormal-]

sent ya a DM :^)