I watched this video 9000 times and still comes back whenever i want to reprogram it again lmao 😅
@diodedynamics9 ай бұрын
We'll always be here to help!
@ARRehman8029 ай бұрын
Me too
@passionquebecetdecouvertes33707 жыл бұрын
This is exactly what I dreamed of having on my toyota in France. So I ordered it because I am very satisfied with all the articles of Diode Dynamics that I have already received.
@Athio-11252 жыл бұрын
This way of programming it reminds me of using cheat codes in gta san Andres, gonna need to buy this now
@diodedynamics2 жыл бұрын
So nostalgic!
@svetlanashulga27155 жыл бұрын
Works amazingly , best money spent on my FJ Cruiser! It doesnt activate the turn signals upon unlock, just on lock.
@Iamleonbarbero3 жыл бұрын
Works with my lexus ct200h. Works as advertised!
@oda2is9823 жыл бұрын
When you setting time for the arrival/departure lights the car have to be on or off? For some reason can't set less than 20 secs 2009 Lexus is350.
@diodedynamics3 жыл бұрын
Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
@joec160 Жыл бұрын
thanks for the video guide. am i able to set wig wag as default on my hazard permanently? i on my hazard, flick the lever to the right and managed to get wig wag hazard. however it revert to default after i restart the engine.
@diodedynamics Жыл бұрын
Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our in-house US service team would be happy to help you with that.
@gajupx12457 жыл бұрын
ordered mine already should get it by tomorrow. ;-)
@PinealConceptsLLC10 ай бұрын
I have a 2020 Ascent and it seems like this item isn't compatible from what I've read. I'm mainly looking to switch to LEDs without hyper flashing. I've tried built-in resistor bulbs that worked fine in other cars, but in the Ascent these bulbs will flash normally sometimes, but also will go into hyper flash once they get hot (i'm assuming). My question is how can I get this vehicle to LEDs without hyper flash?
@diodedynamics10 ай бұрын
Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our in-house US service team would be happy to help you with that!
@7homas0wen Жыл бұрын
Hi. Have got one of these in my Toyota Prado. Everything works other than my turn signals! Any ideas?
@diodedynamics Жыл бұрын
Hey there! Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
@msk_xx8085 Жыл бұрын
I have switchback Leds for the turn signals, is it possible to have the wig wags be the white led instead of the orange turn signal color? Thanks
@diodedynamics Жыл бұрын
Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
@theVRpilot6 жыл бұрын
How do i install the flasher unit? I purchased it but wasnt sure. Lexus 2014 ct200h.
@diodedynamics6 жыл бұрын
Hi there! Please go ahead and give us a call at 314-205-3033 Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team will be happy to guide you through the installation!
@theVRpilot6 жыл бұрын
Diode Dynamics thanks guys. I found it. It was hidden, but it works! Still trying to increase my arrival and departure lights tho. Cant quite get it.
@diodedynamics6 жыл бұрын
We're glad to hear you got it installed! Don't hesitate to contact us if you'd like assistance programming any of the functions!
@camlife69302 жыл бұрын
Sweet! Can the wig wag pattern be activated while the car is running? Or does the ignition need to be in the off position? 🤔
@diodedynamics2 жыл бұрын
The wig wag pattern should work when the car is running as well.
@KAnE3o14 жыл бұрын
Can I turn off the arrival and departure lighting completely and not do the 10 secs to 90 secs?
@diodedynamics4 жыл бұрын
While the SmartTap is configurable, it will not allow for you to turn it off.
@greenmondaymorning4 жыл бұрын
This looks very cool, i am curious about the turn signal tap feature, my 05 corolla does not have this feature lile new toyotas do, will this device activate that or will it be unavailable to my application?
@diodedynamics4 жыл бұрын
Hi there! We offer a Smart Tap for your Corolla, so everything should function!
@TheLifeOnHigh2 жыл бұрын
@1:53 I’m having trouble configuring the “wig wag strobe” feature. Any tips beyond what this video delivered?
@sweetooth086 жыл бұрын
Arrival lights are backwards, they turn on when I lock the doors.
@rivboi5 жыл бұрын
Fausto Rios mine too. And I can’t get anything less than 4 blinks.
@danielsane305 жыл бұрын
I think of you have DRL function it only works on lock.
@thmarkpark5 жыл бұрын
@@danielsane30 Do you know why this is? Any way to make it work both ways?
@bachtelturm4 жыл бұрын
Same on my lexus
@kaecee19917 жыл бұрын
I got mine for my scion tc2. Only feature I was excited was the unlock and stay on feature but for some reason it only stays on only when locking the car but not when unlocking. Is there a reason for that?
@diodedynamics7 жыл бұрын
+churchillsucksass We are sorry to hear about the issues you're experiencing with programming your arrival and departure lighting! Please give us a call at 314-205-3033 Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and we can help you troubleshoot.
@bulletgrazer7 жыл бұрын
Can this be used with standard bulbs? Or does this require led bulbs?
@diodedynamics7 жыл бұрын
+bulletgrazer0 It works great with standard or LED bulbs!
@Steve211Ucdhihifvshi4 жыл бұрын
Hi guys, really like this idea, just wondering how this would go on an australian fj cruiser? Our indicators on the front only turn on when turning and cant stay illuminated. Is it possible to have the normal wigwag etc etc along with everything else but not have the turn signals constantly illuminated whilst driving? (We have smaller bulbs in the main headlight assy. lens for the same function parking lights) Also do you have a distributor in australia? Cheers S
@diodedynamics4 жыл бұрын
Hi there! Thanks for reaching out! Go ahead and email us at contact@diodedynamics.com, and our service team would be happy to look into this for you! Thanks!
@user-njyzcip3 жыл бұрын
FYI the ADR says when the hazards are on both left and right indicators must turn on and off at the same time, at 30-90 flashes/min iirc
@Shotokan072 жыл бұрын
Are the strobe and wigwag options legal to use in New England States and NYC?
@diodedynamics2 жыл бұрын
Hey there! We would definitely recommend checking your local laws to see what can and cannot be used.
@LonewolfWRX3 жыл бұрын
Does this relay fix the hyperflashing on LED bulbs? I installed the DD LED C light upgrade on my 2020 WRX premium and it hyperflashes.
@diodedynamics3 жыл бұрын
This module does fix hyperblinking. However, you shouldn't be experiencing hyperblinking with our C-Lights. Go ahead and give us a call at 314-205-3033 Monday-Wednesday 10 a.m.- 5 p.m. CST (we are closed 12/31 and 1/1), or shoot us an email at contact@diodedynamics.com, and we can help you with that!
@sc230mb5 жыл бұрын
My left circuit doesn’t work with LEDs front and rear. Does your relay work with a LED/incandescent combination?
@diodedynamics5 жыл бұрын
We're sorry you're experiencing an issue! This module is compatible with LED and incandescent bulbs. Please go ahead and give us a call at 314-205-3033 Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team will be happy to troubleshoot that for you!
@Spook6715 жыл бұрын
This works for 2005 Toyota Camry Le?
@diodedynamics5 жыл бұрын
It sure does!
@dgkRyan816 жыл бұрын
Would you run into any problems adding this if you already have resistors?
@diodedynamics6 жыл бұрын
+Ryan Hanson You should not run into any issues installing our SmarTap with resistors already installed. However, if you do experience any problems at all, disconnecting the resistors should address that.
@Glyphosatemax2 ай бұрын
Doesnt work on gt86 2019. Wont save when you put stalk in center.
@diodedynamics2 ай бұрын
Sorry to hear about that! You can check out the listing on our website to see the compatible vehicles that this module is designed for: www.diodedynamics.com/smarttap-cf18-led-flasher-module.html
@Glyphosatemax2 ай бұрын
@@diodedynamics I contacted the support who took the module under warranty but the problem is the same even though according to the support the vehicle is compatible
@godsplannn2 жыл бұрын
Hi mine apparently stopped showing the arrival function. What’s the reason for this? When I went in the car the left turn signal was engaged although my car was off (if that is a reason it’s off.)
@diodedynamics2 жыл бұрын
Hmm- that's strange. Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
@BrandyyGamerChannel2 жыл бұрын
How do I get the strobe function on my turns signals and not just the hazards
@diodedynamics2 жыл бұрын
Hey Brandon! Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.
@FuryJDM6 жыл бұрын
Will this work with push button start on 2016 Subaru STI? As far as programming? I saw you worked with a turn key vehicle
@diodedynamics6 жыл бұрын
+Ranger TS Yes, this function should work the same with push-button start!
@FuryJDM6 жыл бұрын
Thanks! I'm about to order. I just installed my switchback c-lights and they're amazing. Only issue I have though is one turns on and one stays off when I switch to the DRL mode on the headlamp switch.
@diodedynamics6 жыл бұрын
We're sorry to hear about those issues you're experiencing! Please give us a call at 314-205-3033 Monday-Friday 9 a.m.- 5 p.m. CST, or email us at contact@diodedynamics.com, and we can help you troubleshoot and send a replacement if necessary!
@MaulKiller547 жыл бұрын
If I use LEDs for my front turn signals, but retain the stock bulbs in the rear turn signals, will they both blink at the same (correct) speed?
@diodedynamics7 жыл бұрын
+MaulKiller54 They sure will! The SmartTap will correct any hyperblinking issues with your LED replacements, so they will match with your stock turn signals.
@MaulKiller547 жыл бұрын
Awesome, thanks for the quick reply!
@neoquip7 жыл бұрын
how do you do a combined wigwag strobe effect? when you say a combo of eight effects, what would they be? I fitted mine on a 2008 STi Subaru yesterday, dead easy to fit.
@diodedynamics7 жыл бұрын
+neoquip For more programming instructions, check out our programming guide at the link below! You can combine the hazard modes to create effects like wig-wag strobe, slo-mo wig-wag, slo-mo wig-wag strobe, etc. If you have any further questions, feel free to email us at contact@diodedynamics.com! diodedynamics.com/docs/install/universal/SmartTap_Guide_2.pdf
@neoquip7 жыл бұрын
yeah, read that. What does it mean when it says you can combine them with your strobe settings? What/which STROBE setting are you referring to?
@diodedynamics7 жыл бұрын
+neoquip There is one base strobe setting, and you can combine wig-wag and/or slo-mo effects with it to create other effects. If you have any further questions, feel free to give us a call at 314-205-3033 Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and we can explain further!
@PinealConceptsLLC10 ай бұрын
Where was the flasher located on your STi? About to do this on a 2014 Crosstrek and haven't really looked yet. Hopefully it's easy.
@michaelwu91356 жыл бұрын
Will the smart tap work with sequential turn signals? If so how does it work?
@diodedynamics6 жыл бұрын
+Mwu Check out the link below for our list of compatible vehicles! www.diodedynamics.com/smarttap-cf18-led-flasher-module.html
@michaelwu91356 жыл бұрын
Diode Dynamics I meant how would it work with sequentials on my wrx?
@diodedynamics6 жыл бұрын
+Mwu Unfortunately, we are not able to confirm compatibility or function with any aftermarket headlights or tail lights which may have a sequential function.
@boostedbuddah77843 жыл бұрын
Do these hazard options hold memory because I can't get it to?
@diodedynamics3 жыл бұрын
The speed at which you program the hazards to blink will save, but the patterns will not. For example, if you are wanting your hazards to wig wag, you would have to turn on you hazards and then hit the turn signal to activate it.
@SubaruWrxSti16 жыл бұрын
Does this void any dealer warranty?
@diodedynamics6 жыл бұрын
+az0nicmtb125 Since you'd simply be replacing the flasher without cutting any wires, you would not be voiding your warranty.
@aznChillax5 жыл бұрын
Is this compatible for 11 scion tc?
@diodedynamics5 жыл бұрын
It sure is!
@Haruyuki116097 жыл бұрын
Has the delay for the Tapturn for 2016+ model WRX/STI with OEM tap turn been fixed with this relay?
@diodedynamics7 жыл бұрын
+Aaron Sze Yes! Many other CF18 flashers have a longer first blink, due to the analog capacitor used for timing. Our flasher is completely redesigned to be fully digital, so there is no hesitation or longer first blink.
@tools36576 жыл бұрын
@@diodedynamics after I push the hazard button I get on long blink followed by the 2 blink succession. That normal?
@diodedynamics6 жыл бұрын
@@tools3657 Please go ahead and give us a call at 314-205-3033 Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team will be happy to troubleshoot that!
@altazz5 жыл бұрын
Tools 365 was it normal? Mine acts the same way
@tools36575 жыл бұрын
@@altazz I will find out Monday and let you know.
@jwkpov7347 жыл бұрын
+Diode Dynnamics Do you have plans to make F1 Taillight for WRX / STi??? Thanks (I see you made 4th brake light for Mustang. Wink Wink.)
@diodedynamics7 жыл бұрын
+Jw K We do not have any immediate plans to develop one, but we're always working on new products, so it may be something we offer in the future.
@jwkpov7347 жыл бұрын
Thanks for the respond, looking forward to purchasing DD products in the future.
@hectorperez62932 жыл бұрын
can I save my choice after
@diodedynamics2 жыл бұрын
Yes, whatever the SmartTap was last set on, it will stay on that setting.
@tfpjr7 жыл бұрын
Same here as churchill. Arrival lighting (unlock) doesn't seem to be working.
@diodedynamics7 жыл бұрын
+tfpjr We're sorry to hear you're experiencing these issues as well! Go ahead and call us at 314-205-3033 Monday-Friday 9 a.m.- 5 p.m. CST, or email us at contact@diodedynamics.com, and we can help you troubleshoot.
@carbonunit7 жыл бұрын
ya mine doesn't work form my FJ as well.
@diodedynamics7 жыл бұрын
+carbonunit We're sorry to hear that you're seeing the same issue! Please call us at 314-205-3033 Monday-Friday 9 a.m.- 5 p.m. CST, or email us at contact@diodedynamics.com, and we can help you troubleshoot and send a replacement if necessary.
@GAMEVIDSnorwegian4227 жыл бұрын
On my prius that function doesn't work either, everything else works tho
@tfpjr7 жыл бұрын
Will this work with a '17 brz?
@diodedynamics7 жыл бұрын
+tfpjr Unfortunately, we have not been able to confirm fitment on the 2017 BRZ. If you're able to access the factory flasher module and send us a photo at contact@diodedynamics.com, we'd be happy to confirm whether the SmartTap will be compatible!
@friendo78711 ай бұрын
I have this for a 2006 Tundra but the blinkers do not stay lit during lock or unlock functions. Anyone else have this problem?
@diodedynamics11 ай бұрын
Feel free to give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our in-house US service team would be happy to help you with that.
@mitchellthaw83027 жыл бұрын
Hi, do you sell relay for 2016 Mustang? Thanks.
@diodedynamics7 жыл бұрын
+Norman Thaw Unfortunately, this product is not compatible with any Ford models, and we do not offer a flasher compatible with your Mustang at this time. Sorry about that!
@Nazze2 жыл бұрын
I want this for my genesis coupe but i cant find any :(
@diodedynamics2 жыл бұрын
Unfortunately, we do not offer a SmartTap flasher for the Genesis. Sorry about that!
@Nazze2 жыл бұрын
@@diodedynamics make one please
@Trinn035 жыл бұрын
How do you save these functions?
@diodedynamics5 жыл бұрын
Hi Ryan! The SmartTap will retain your preferred functions unless you manually reset the flasher!
@АлександрБушев-м8п5 жыл бұрын
For legacy 2016 avaliable?
@diodedynamics5 жыл бұрын
Hello! Unfortunately, our SmartTap™ Flasher Relay is not compatible with the Subaru Legacy. Sorry about that! If you have any other questions, just give us a call at 314-205-3033, Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com!
@marvincastillones61944 жыл бұрын
Man U I thought u can save the function for hazards but u can’t. Also the turn signal don’t work did exactly the instructions says and still the 4 blinks turn signals
@diodedynamics4 жыл бұрын
Hey there! Just give us a call at 314-205-3033, Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com and our service team can assist you!
@resuort5 жыл бұрын
Can this be used to slow down sequential turn signals ?
@diodedynamics5 жыл бұрын
Hi there! This module doesn't have that particular function built-in. Sorry about that!
@jeremycortese5 жыл бұрын
Doesn't work for Subaru Impreza 2017+. What a shame...
@diodedynamics5 жыл бұрын
Hi Jeremy! If we hear anything from our engineering team about an alternate solution for the 2017+ Impreza, we'll be sure to share!
@jeremycortese5 жыл бұрын
@@diodedynamics sounds good. If you guys figure it out, your sales will increase even more !
@papayaman1237 жыл бұрын
What is that thing you twist to turn on your car?? It doesn't exist in my timeline!! (sarcasm)