How to program used ABS module on 2015 Ford F150 using Forscan

[@lalail61]

Very straightforward. No non-sense presentation. So helpful. You’ll save lots of $$$ to many people. Kudos to you.

[@JVFIXLLC]

thanks

[@mode6skatesupply]

Excellent

[@JVFIXLLC]

Thanks

[@theofrancis3803]

Hi which version of forscan are u using I have a 2015 escape

[@nightspeedclub]

Which conector are you using, maybe it appear the extra conection because you have the VCI or ids

[@JVFIXLLC]

i use an Autel j2534 interface but you can get the cable cheap on amazon or going to the official Forscan website

[@kuneho05ify]

Good day, i have a mustang 2012 5.0 Boss superchager also having abs unit fault same as your F150, we installed used abs unit. we also have paid forscan subscirption, but upon running the ABS as built format, theres no data apearing to be saved. and tried to press Load factory as build, did DL anything. it only say Operation succesful. also there's no ABS configutation options on our part, compairing on yours what do you think is the problem TY

[@JVFIXLLC]

do you have any codes stored?

[@mrflinstone2553]

Great info, did you use j2534 for this? & would the jbox work on 2011 fords? Thanks!

[@JVFIXLLC]

yea the j2534 box works from 1997 to the present year. for all makes and models

[@dilipladwa2112]

I am trying to install a used ABS module from Pick n' Pull. Should I remove the faulty one first and install the used one?

[@JVFIXLLC]

yea just install the used one and do a as built restore with forscan and it should work

[@rv4flyer]

I am trying to do this on a 2013 F150. We have put in a used ABS module, and I have managed to follow you video until the "configure module" part and I don't get the window to change the VIN number all I get is one line that the hill start assist is enabled. Any ideas? Thanks Joe

[@JVFIXLLC]

are you using forscan or the dealership software FDRS OR IDS

[@rv4flyer]

I’m useing forscan. Just downloaded it this week

[@JVFIXLLC]

@rv4flyer ok did you buy the subscription too. is like 12bucks if u didn't buy u will have too.

[@rv4flyer]

@@JVFIXLLC No, I just have the free trial. I will pay for the software if I have to. Does it make a difference on what the software will do?

[@JVFIXLLC]

@rv4flyer yes if u don't pay the 1yr sub it will not work

[@curiouscaper2400]

Why do you have to download and install the factory version of the software?

[@JVFIXLLC]

is just the way is designed there is no other way.

[@mjlaban]

What was the error code originally?

[@JVFIXLLC]

water damage in the module pins was the issue and that's why it was replaced