How to program your travel limits Precision/Marantec 370/380

[@danielchewy]

Exactly what I was looking for. Thank you

[@mdemko]

1. **Introduction and Setup**: - The video covers how to program travel limits on a Precision/Marantec 370/380 garage door opener. - The presenter identifies the components, including buttons and the indicator screen. 2. **Setting the Upper Limit**: - Hold the main button for four seconds until the display indicates it. - Use the plus and minus buttons to adjust the door to the desired upper position. - Press the P button to save the upper limit. 3. **Setting the Lower Limit**: - Press the P button again to start setting the lower limit. - Hold the down button until the door is close to the ground, then tap it until it touches the floor. - Use the up button to make fine adjustments if necessary, then press the P button to save the lower limit. 4. **Finalizing the Setup**: - Ensure the remote transmitter is working by checking the Wi-Fi indicator. - Press the P button once to clear any persistent indicators, confirming that the limits are saved. 5. **Testing and Conclusion**: - Test the programmed limits using the Precision/Marantec button. - The video concludes with a reminder to subscribe and a thank you for watching.

[@Okidus]

Hey looking for how to program a new remote for these. Thanks.

[@davenygard30]

Thanks.You made it so easy but factory video wasn’t working.

[@Roganc]

Winner!!