Today we go through the entire procedure on how to change the oil in your Aprilia RXV or SXV bike, this covers all years, 450 or 550 engines, except for the MXV. This is quite the procedure. to be sure.
Пікірлер: 44
@dan_mccabe3 жыл бұрын
Hey these types of videos really help the XV community alive. Do you think you could keep making these types of videos? I'm about to pull the wheels if my 09 sxv and a video like this would be handy!
@foredore3 жыл бұрын
Yeah ill definitely be posting maintenance stuff as I do it. For the wheels there's really nothing special to it, they're like any other bike really, just clean and re grease the axle, check the wheel bearings, and I always torque the axle nuts to about 80-75% of the torque spec because i use anti seize, which causes it to tighten more with less torque.
@mikaelasp23483 жыл бұрын
@Daniel McCabe @foredore Is there any whatsapp / snapchat groups for sxv owners?
@foredore3 жыл бұрын
@@mikaelasp2348 we're all on Facebook, every bit of information you need though is in the aprilia forum
@dan_mccabe3 жыл бұрын
@@mikaelasp2348 if there's not, there should be lol I'm on the Facebook pages and I use this site a lot xvasylum.wikidot.com
@youllsee1255 Жыл бұрын
Thank you very much ! It helped me so much to do it on my own ! 💪🏻
@mikaelasp23483 жыл бұрын
Great vid mate. More these, please! 🤟🏼
@foredore3 жыл бұрын
Thanks man
@stefanvonbrockdorff29423 жыл бұрын
Lovely video bro! May I suggest you buy longer allen keys or a socket one, will make your life much easier :)
@apriliaracingchannel42902 жыл бұрын
Nice tutorial :) think of uploading some custom map with XV Tuner with limited rev count before cold start :) Cheers
@Borntoride1252 жыл бұрын
Get shiwfty!!!! 🤣😂 you the man, by George he is!
@rolphbluesky85374 күн бұрын
ive never taken that allen screw out just refill gearbox 550ml ,i use same as engine motul 300v 15/50,i lean the bike on side and pour some oil in were the filter goes
@foredore4 күн бұрын
Well good for you, but that is not the "proper" procedure, nor the correct oil, to do this. In both the maintenance manuals, and the instruction sheet provided by af1, it says to leave the bike on its stand or vertical. Im not going to show incorrect information that is a habit picked up from KTM riders. Theres no need to risk scratching your plastics, or dirtying a measuring cup for the gear oil. Besides that, I'm not going to teach the disregard for proper fill plug use, as too little or too much oil can damage your transmission, and overheat. The prefilling oil at the filter is similar to prefilling oil filters for vehicles debate. Many hobbyists will tell you to prefill, but many service techs will advise against it, as according to manufacturers, it introduces unfiltered oil into the oil jets, which go to things like bearings. Seeing as how the manual doesn't say to do that, I will not teach that. There's still lubricity in the engine for the few seconds of running until new oil gets filtered. I mean why not just use rotella t4 t5 or t6, if you're going to use the wrong oil you might as well use the cheap stuff. My friend uses t6, but he also has an oil bypass mod, which he is testing that should reduce the need for heavier oils like 10w60.
@rolphbluesky85374 күн бұрын
@@foredore i use this oil as was recomended by the aprilia agent who over years had engines in bits and it the only oil were the engine wasnt wornout ,no cam wear no bucket wear ,no rust ,my engine still look new inside with no signs of wear
@foredore3 күн бұрын
@rolphbluesky8537 well thats great, but realize you're robbing horsepower and increasing resistance and friction with thicker oils. I don't care what you use if it works for you. But this is a video on proper procedure. Inevitably the sample size for different oils, thinner and thicker, is very small, and I'm not going to say one is better over the other. I have over 40,000 kms on that sxv running 10w60. 20k of which I put on, running 10w60, and it looks great inside. Thats more than 98% of other SXV's out there.
@mxxproductions5033 Жыл бұрын
Hi, thanks for the video, really helpful. And can you tell me the amount of the gear box oil? My srcew to check it, dont seem to move out anymore
@foredore Жыл бұрын
Probably just stuck, i couldnt tell you by cc's but im sure you could look it up on apriliaforum
@mxxproductions5033 Жыл бұрын
@@foredore i can turn the screw, but its nit coming out..idk Maybe i find some infos there, thanks
@foredore Жыл бұрын
@Mxx productions try prying with a flat blade screwdriver as you turn it, the threads are probably messed up, then get a new screw and fix the threads with a heli coil
@Borntoride1252 жыл бұрын
Big shout out to my Ontario brethren; I just acquired an 08 sxv450. Any tips?
@foredore2 жыл бұрын
Just keep fresh oil in it and learn to do things yourself!
@The1337Rainman5 ай бұрын
Quick question from Germany here: can you stil get crankshaft- and rodbearings in the US ? or is there any alternative to the aprilia original parts over there? we are pretty much fucked in Europe. no parts left and no company is doing something to offer replacement parts..
@foredore5 ай бұрын
Parts are same for us if not worse. I think volpe motor on Facebook is remanufacturing rod bearings, and i know there was one guy who had a batch made in Japan, so there are some aftermarket options if you look in the community pages i beleive. Also some kawasaki rod bearing are pretty close ive heard.
@The1337Rainman5 ай бұрын
@@foredore thank you so much!
@blistering_boogies79493 жыл бұрын
My rxv450 doesn’t have that plastic tank in between the the skid plate and the engine . What’s yours for
@foredore3 жыл бұрын
It's just a catch can for coolant
@Marc-rg6gy2 жыл бұрын
Hi, I done the oil change, my oil has gone above max on the tube. How do I empty a little?
@foredore2 жыл бұрын
I've just used a syringe out of the fill cap
@haruncevik54592 ай бұрын
I apologize for this ignorant question. What should be the oil change frequency of RXV 450? Should the measurement be hours, kilometers or years?
@foredore2 ай бұрын
1000 km or 15 hours, whichever comes first. Book says 3000km, do not follow it.
@MOTO-Republic3 жыл бұрын
gear box oil is different in the oil you put in the oil reservoir?
@foredore3 жыл бұрын
Very different, gearbox is mtl80wt engine oil is 10w60
@MOTO-Republic3 жыл бұрын
@@foredore thanks one last question,.how many liters did you put on gear box and on oil reservoir?
@foredore3 жыл бұрын
@@MOTO-Republic just buy a couple jugs of oil and fill it to the fill line, don't be concerned with how much
@zambozambo93912 жыл бұрын
Great video can you make a video on ecu removal
@foredore2 жыл бұрын
No need reallyf, its 2 bolts and a plug
@zambozambo93912 жыл бұрын
@@foredore cool I will give it a ago got to send it to get mapping
@christophercaraballo90122 жыл бұрын
I have a rxv 450 !! I need to shim pistón 2 any help?
@4R1P5R5 ай бұрын
The reason most XV owners tip the bike over to install the oil filter is so that you can add oil in the oil filter housing. Doing so prevents air from entering the oiling system. I definitely would not install a new filter without tipping the bike on its side and filling the oil filter housing with oil after installing the filter. Also the XV 550 takes 1250ccs of engine oil not “a few liters” that’s f ing crazy man. You cannot use the min max site tube to verify engine oil fill level without first running the bike up to temperature. Filling the engine oil to the max level while the engine is cold will result in overfilling the engine oil. Perhaps this is why you oil is black. The gearbox takes 550 ccs. I don’t bother using the site drain when filling the gearbox. Just make sure to drain ALL of the gearbox oil and measure out 550ccs carefully.
@foredore5 ай бұрын
Where's your video then? Trust me you're gonna need more than 1250cc after you dump oil into your airbox when you tip it over. There's no need to scratch your plastics to install oil, fite me. Idk what you think you're gonna do to the engine by filling it to the right level, running it, then topping it up properly, your argument is invalid. If you measure the oil you actually use to fill it to within the sight tube, you'll use more than 1250cc without a doubt. Sure you can measure out for the gearbox if you want, but why bother guessing and dirtying a cup, or potentially adding dirt to your gearbox, when its literally 2 allen heads to make sure its done properly? If you consult the various manuals for the different years, and the af1 manual, you'll see I've taken the factory and dealer instructions into consideration, after all this is instructing people how to do it "properly".
@4R1P5R5 ай бұрын
@@foredore I'm just trying to clear up the gaps in your video. Not trying to be a DDIICCKK. I'm an XV owner and moderator on AF1 and various FB XV forums. All of the feedback that I provided in my comment on your post can and should be verified on AF1 Racing and others forums. I am confident in what I've written.
@foredore5 ай бұрын
@4R1P5R Whats your name? Ill have heard of you. I don't care what people's opinions are, if you want to do it that way go ahead, but I'm not going to teach it. People believe all sorts of mystical nonsense about prefilling filters, measuring, etc. But others swear by not intoducing unfiltered oil into the filtered side of oil system, and engines will find their own level regardless of the possibly dirty measuring cup you use. The only thing special about the XV engine is how poorly it was implemented and set up from the factory, otherwise its a good reliable engine like any other. You're not "clearing up gaps", you're introducing your opinion, which is fine, but I don't believe in it, nor will I teach it. You are being a dick, because you assume you're right and I'm wrong.
@christophercaraballo90122 жыл бұрын
It is already running but the descompresónator 🤦🏽♂️ dont Know how to write it Its making a noise plap plap pla
@HeartyDegree2 жыл бұрын
low idle rpm. Should be around 2100 and highly differs on ecu map