How to Properly Foam Wash for a Scratch-Free Finish! - Chemical Guys

[@boutlaws149]

Wife wanted to take her car to a professional detailer..$500. Decided to spend $1200 on all the stuff needed. Save myself $1000 a year doing it myself!!!! It’s enjoyable if you got all the equipment to do it!

[@ChemicalGuys]

Enjoy your detailing products!!

[@Pinkielover]

You still got ripped off.. It's much cheaper than that

[@boutlaws149]

@@Pinkielover it’s always cheaper somewhere else but you get what you pay for. If I could get Safeway Select branded equipment probably cost me under a $100!

[@clintsaines9274]

@@Pinkielover id rather just pay the money

[@Chocobohunter]

@@clintsaines9274 real men detail their own cars

[@pathfindercod4638]

It’s therapeutic watching you foam and wash. Great video are usual, Nick.

[@ChemicalGuys]

Hey Steve! Thanks for the awesome response and foaming is a satisfying experience. - CG Nick

[@wen7355]

I really like how you explain things in a calm and relaxing way. Your video is so informative. Keep up the good work !

[@ChemicalGuys]

Hey! Glad you enjoyed the video!!

[@HJeff]

I liked how fast you talked. Concise and to the point.

[@ChemicalGuys]

Thanks so much for watching!

[@tommyolsen8224]

Love that SLK R170! Use to have on for 6 years , loved it!

[@ChemicalGuys]

Right on!

[@drummerboy_miked4530]

This guy's the bob Ross of detailing I love it

[@ChemicalGuys]

😁 Thanks so much for tuning in!!

[@phantomlord3280]

Nice car! I have a 2002 slk 230 that has just under 70k miles that was my first car I purchased on my own. Such a fun little car. Great video!

[@ChemicalGuys]

Very nice! Happy detailing! - CG Nick

[@danielgill3016]

I love CG products. If you don’t have their microfiber towels, you have Fear of missing out. So much better than Kirkland's. Now, let’s see them come to Milwaukee and get the salt off my G80 in -10F! Foaming looks like the way to go. And dual buckets with dirt traps. I learned a lot from this video. Gracias Vatos!

[@ChemicalGuys]

Happy detailing!!

[@vitalvital]

Nice, back to back video with Nick, thanks for the videos!

[@ChemicalGuys]

Glad you like the video! - CG Nick

[@CTAjunior]

This is therapeutic but living in Las Vegas, if I work too slow or even decently rapid, the car still dries too fast and I’m left with water and soap spots

[@ChemicalGuys]

Hi Adrian! Thanks so much for tuning in. Try to work in the early morning or evening hours when the temperature is cooler to prevent soap from drying and water spots. After Wash will also aid in the drying process.

[@bfilz]

Great video! I can watch these all day, LOL! I noticed that you guys don’t leave the wiper blades up when you wash cars. Is that preference or is there a practical reason why?

[@ChemicalGuys]

Hey Brandon! Thanks so much for watching and for your question. The reason I don't leave the wiper arms up when foam and rinsing is because I've seen it too many times where the arms will drop onto the windshield or when working with many cars you have to adjust the wipers so that they do not come into contact with the paint on the hood. For me it easier to scrub underneath there with a foamy wash mitt. - CG Nick

[@toddreeder3082]

I need this Chemical Guys product to add my arsenal fantastic products 👏

[@ChemicalGuys]

Hey Todd! Thanks so much for being part of the Chemical Guys family!!

[@Frag4Life]

Thank you for the information, I’m definitely gonna get my kit from y’all but I was just wondering in what order so you clean the car if I’m not mistaking it’s like this 1.Wheels 2.body 3.wax 4.interior Is that correct?

[@ChemicalGuys]

Absolutely!!

[@Engineerboy100]

Great job on the video, I'm going to use these tips when I do my first foam wash once my foam cannon gets here. Thank you for posting. One of my cars is an SLK2130 too lol :)

[@ChemicalGuys]

Enjoy your detailing products!!

[@tianakern6785]

What’s the point of using the foam cannon first if you still do it by hand after then foam again? Could you just rinse then wash by hand then foam and dry?

[@ChemicalGuys]

Hi Tiana! The foam produced by the foam cannon softens debris and lubricates the surface to help lift abrasive particles which prevents scratches when passing over it with a wash mitt.

[@LethargicSquirrel]

I'm surprised I never see anyone mention this, but: Want your vehicle to dry spotless without further touch and risk of scratch? Get a pressurized chemical sprayer from a home improvement store and dump a couple gallons of distilled water in. Rinse from top to bottom thoroughly. No spots. Just be sure to ONLY ever use distilled water in that sprayer.

[@Mario-hd5se]

Hello what soap do you recommend for vinyl wrap 3M for cars for the foam cannon as well?

[@ChemicalGuys]

Hi Mario! Use your favorite Chemical Guys car wash soap with a foam cannon to gently clean vinyl wraps. For matte/satin finishes, use Meticulous Matte Auto Wash.

[@someone-zu7hj]

What pressure washer gun was that

[@pathfindercod4638]

It’s their own gun they sell on their website.

[@ChemicalGuys]

Hey there! Check out the Snubby Attachment. www.chemicalguys.com/torq-snubby-pressure-washer-gun----foam-cannon-attachment/EQP402.html

[@andrewmcfarland3843]

Best in the business

[@ChemicalGuys]

Thanks so much for being part of the Chemical Guys family!

[@trucon782]

What happened to the woolly mammoth towels?

[@ChemicalGuys]

Hey there! The Woolly Mammoth Towel is such a popular item it is hard to keep it on the shelf but we are working hard to have it stocked soon.

[@Drifter077]

This foam canon, later when mixture is ready you connect to water hose do you?? 02:43

[@ChemicalGuys]

Hi there! The foam cannon connects to a pressure washer using quick connect adapters.

[@somekid4128]

For that car soap can I be outside in the sun or in the shade?

[@ChemicalGuys]

Hi Ricardo! As long as the surface of the vehicle is cool to the touch, it can be used outdoors. - CG Nick

[@ChemicalGuys]

Proper Foam Wash! - Citrus Wash and Gloss: bit.ly/3ql35AH - TORQ Professional Foam Cannon: bit.ly/42bLjgh - Gray Matter Drying Towel: bit.ly/3qfkcDT

[@criss6945]

U didn't mention anything about how to adjust the foam cannon

[@Nedbubkiss51]

How long do you leave foam on before rinsing?

[@ChemicalGuys]

Hey! Allow a moment for the foam to dwell before moving to the next step.

[@mrguru091]

What's the difference between the foam cannon and the other foamer thing u guys have?

[@thr65]

I have a black car and its usually not dirty cause i only use it in nice weather but it get really dusty so was wondering if i can only do a foaming application without hand washing and rinse then towel dry

[@ChemicalGuys]

Hey! It is possible to perform a touchless wash when there is only light dust present. Simply let the foam dwell a few moments before rinsing off.

[@jeffcozad4863]

What is the cart you are using? I looked on the web site and don’t see it. Thanks!

[@ChemicalGuys]

Hey Jeff! We use two-shelf tool carts that can be found online or at most hardware stores.

[@nikkoleroessing5741]

I bought that foam cannon for my car and I noticed that yours has a straw but when I bought mine it didn’t have one. Is there supposed to be one in the box?

[@ChemicalGuys]

Hey! Yes, the foam cannon should include a siphon tube that attaches to the sprayer head.

[@nikkoleroessing5741]

@@ChemicalGuys i had bought it at Canadian tire, I don’t have the receipt or anything anymore, is there a way for me to make one so I don’t have to hold it upside down to use it?

[@dj9151]

I don't know if I missed it but does Citrus Wash & Gloss remove wax and or sealant?

[@johnbenjamin7785]

No

[@dj9151]

Thanks for the heads up.

[@kurpal8904]

Is this cannon brass 1.1 or should it be upgraded for thicker foam?

[@bubbie3533]

Very clean 😊

[@ChemicalGuys]

Thanks so much for tuning in!!

[@bubbie3533]

@@ChemicalGuys No, thank you homie. Stay dangerous!

[@gilbertalmendarez3378]

Yes he’s Back !!!!!!

[@ChemicalGuys]

Hey Gilbert!! Thanks for tuning in, we've got more videos on the way. Stay safe, happy detailing!! - CG Nick

[@cameronstevenson5894]

Like this video as you let the foam do it’s job properly by letting dwell first and rinse

[@EbolaSquirrel]

Great tutorial. Cheers.

[@ChemicalGuys]

Happy detailing!! - CG Nick

[@Caydon321]

I bought some of the watermelon snow foam soap and it didn’t foam up when I sprayed it through my cannon

[@ChemicalGuys]

Hey! Try using two or three ounces of Watermelon Snow Foam and fill the rest of the canister with warm water to improve foaming action. Also, be sure that your pressure washer meets the requirements of your foam cannon.

[@TheDoctor46vr]

When you wash a car in the sun is it the UV or the heat from the sun that damages the paint in direct sunlight when its wet?

[@Stumpman61]

To foam and rinse do you use a pressure washer and if so what kind ? Thanks and great video 👍🏻

[@ChemicalGuys]

Hi Mike! A foam cannon will deliver the most foam however you can foam and rinse with a foam gun as well which only requires a standard garden hose.

[@danielebrahim2336]

After foaming, is it best to rinse with a hose or use the pressure washer - as I don’t want swirls. Thanks.

[@ChemicalGuys]

Hi Daniel! It is perfectly fine to use a pressure washer to rinse.

[@betweenthebars256]

If a car is especially dirty - lots of pollen - should I rinse before using foam?

[@ChemicalGuys]

Absolutely!

[@betweenthebars256]

@@ChemicalGuys thank you!

[@johnhopkins7614]

Very eco-friendly method of cleaning car.

[@ChemicalGuys]

Happy detailing

[@stephenport4768]

Can you use this method with the honeydew snow foam wash

[@ChemicalGuys]

Yes, absolutely!!

[@cocoyummy]

My man Nick great video!! Also between citrus wash and gloss and Honey dew what's better for you??😎

[@ChemicalGuys]

Hey buddy! Glad you enjoyed the video. Both are great choices, I recommend using Citrus Wash & Gloss for heavier, stubborn messes and Honeydew for a gentle routine wash. - CG Nick

[@cocoyummy]

@@ChemicalGuys Thank you Nick for the feed back!!

[@retrofasho7970]

I use the pink soap usually but this time i bought this citrus one? Is it bad if i keep using the citrus from now on since its a little harsher on the paint? Or is it safe?

[@ChemicalGuys]

Hey! It is perfectly safe to use Citrus Wash and Gloss as your routine car wash soap.

[@retrofasho7970]

@@ChemicalGuys thank you 🙏

[@kylecowley5201]

How much water is in the cannon before you add the soap/cleaner?

[@ChemicalGuys]

Hey Kyle! Add two or three ounces of your favorite car wash soap and then fill the rest of the canister with clean water.

[@kylecowley5201]

@@ChemicalGuys good morning, can I use the car wash soap to my detergent tank on my power washer and wash the vehicle down before I use the foam cannon or does the detergent tank require a different type of soap? Thank you for your time and help. New to the power washer so I don't want to mess anything up.

[@mcalisterhayes]

Does the foam cannon require a power washer?

[@ChemicalGuys]

Hey! That's correct, the foam cannon must be used with a gas or electric pressure washer. - CG Nick

[@Stumpman61]

Nick what do you recommend as far as a pressure washer?

[@TheJustinboodram]

Do you recommend leather chamois for drying?

[@ChemicalGuys]

Hey Justin! Thanks for your message. There are pros and cons to use a chamois, yes they absorb water and can be wrung out but it is also dragging across the surface having the potential to mar and scratch the paint. I prefer microfiber to gently whisk away water drops and buff to a streak-free finish. - CG Nick

[@TheJustinboodram]

@@ChemicalGuys thank you very much

[@benparker1241]

I have a couple of red spots on my truck that looks like rust but it's not how do I get rid of them

[@sinosikath0420]

Get some decontamination agents, probably an iron remover. Or just get a stripping soap.

[@RickyOHD]

How long do you usually let the foam sit on the car?

[@ChemicalGuys]

Hey! Allow the foam to dwell for about thirty seconds.

[@dannyoliveira4787]

Great video. Thanks Nick👍🏻

[@ChemicalGuys]

Glad you enjoyed it, happy detailing! - CG Nick

[@CatnamedMittens]

How would you do the painted part when you open doors?

[@ChemicalGuys]

Hey! Use your favorite quick detailer or waterless wash to clean door jambs.

[@CatnamedMittens]

@@ChemicalGuys thanks I appreciate it

[@markocalnan1956]

What's the best way to wash a convertible roof

[@ChemicalGuys]

Hi Marko! Wash the vehicle as normal and you can avoid spraying the soft top with soap and water. Use Convertible Top Cleaner to gently scrub away stains before using Convertible Top Protectant. - CG Nick

[@markocalnan1956]

@@ChemicalGuys hi thank you for that also, I've always washed the roof as normal when I was the the car, I used to use the convertible clean twice a year with the protection, what can I use then to help get rid of some stubborn stains cheers mark

[@carbonio28]

Any idea why I have swirl marks on my car never wash it by hand, only through touchless carwash....got the car Brand New 1 and half years ago.. thanks in advance 🤗🤗

[@deimos63]

The automatic carwashes, wash hundreds of cars, think of how much dirt it carries over to your paint and then it gets spun around, leaving paint swirls.

[@victorzepeda66]

How much psi and GPM do u recommend for the foam to be really foamy? I'm using 1800psi and 1.2GPM

[@ChemicalGuys]

Hi there! Anywhere from 1500 to 3500 PSI, we recommend using 2.0 GPM or as close to that to produce thick foam. - CG Nick

[@victorzepeda66]

@@ChemicalGuys I'm currently using a 1800psi Greenworks from Lowes. And it's running a 1.1gpm. What kind of pressure washer would you recommend that's electric?

[@carycleland9506]

Do you hook the cannon to a pressure washer?

[@ChemicalGuys]

Hi Cary! Yes, the foam cannon requires a pressure washer to operate.

[@gordo9104]

Does the pressure of water damage the paint? And also

[@ChemicalGuys]

Hey! We use between 1600-3500 PSI to safely detail.

[@zandarrt1784]

Whats the name of the spray nozzle

[@ChemicalGuys]

Hey! Check out the TORQ Snubby and the TORQ Max Foam 8 Foam Cannon. www.chemicalguys.com/the-foam-cannon-and-snubby-snow-foam-kit/VIR199.html?gtmListValue=Internal%20Search

[@demineon4966]

Is a power washer needed for any of your foam guns?

[@ChemicalGuys]

Hey! The foam guns do not require a pressure washer to operate, only a standard garden hose is needed.

[@demineon4966]

@@ChemicalGuys for the big mouth too? Are there any special connections needed I have a standard garden hose

[@SF_Native]

Is it possible to get this type of foam without a pressure washer?

[@ChemicalGuys]

Hi! Using a foam cannon will produce the thickest foam but you can still achieve awesome foaming action. - CG Nick

[@MrPotatoHead343]

What are the specs on your pressure washer (flow & pressure) ?

[@ChemicalGuys]

Hi! This is a gas powered pressure washer that has 2800 PSI/2.0 GPM. - CG Nick

[@MrPotatoHead343]

@@ChemicalGuys Thank you very much!!

[@levyathalynn5616]

If I don’t have that Machine can I use the bucket?

[@ChemicalGuys]

Hey there! It is perfectly fine to use this soap with a traditional wash bucket.

[@smardigitalvideo]

How many psi has your power washer.mines is 3700 and will destroy the paint with green tip thanks

[@ChemicalGuys]

Hey! The pressure washer used in this video has a maximum PSI of 2800.

[@efrainperedia9716]

What PSI do I need to use the foam cannon?

[@ChemicalGuys]

Hey! We recommend a pressure washer with a minimum PSI level of 1000 and a minimum GPM of 1.7. Thanks for watching and happy detailing!

[@MrAabbhhiisshheekk]

Pls Where do i buy your products in india?

[@ChemicalGuys]

Hey! We recommend checking your local listings to locate a Chemical Guys feedback!

[@markevanado9463]

Will filtered/softened water maximize foamage?

[@ChemicalGuys]

Hey! No, filtered water reduces the chances of water spots. Thanks for watching and happy detailing!

[@ivanarroyo1986]

How much psi pressure washer and gpm ?

[@ChemicalGuys]

Hey! We recommend a pressure washer with a minimum PSI level of 1000 and a minimum GPM of 1.6. Thanks for watching and happy detailing!

[@ivanarroyo1986]

Chemical Guys thank you guys I just picked up a craftsman pressure washer with 2800 psi and 2.4 gpm and the chemical guys foam cannon love the cannon shoots out a bunch of foam well worth every penny

[@MrJjgarza]

What chemical do you have to remove hard water spots?

[@ChemicalGuys]

Hey! Check out Heavy Duty Water Spot Remover Gel. www.chemicalguys.com/heavy-duty-water-spot-remover/water-spot-remover.html

[@Indiancarvlogs0001]

Nice

[@ChemicalGuys]

Happy detailing!! - CG Nick

[@Ronnie-ev9kb]

Distilled water makes the best foam

[@ChemicalGuys]

Great feedback!

[@miscponderations1014]

Thank you Ronnie! I'll be doing that next time. Unfortunately, I haven't been diluting the foaming soap. Didn't know that had to be done.

[@Duke_of_Luminaria_Imperialis]

Hey that’s my car!

[@ChemicalGuys]

🤩🤩

[@jonathaneleser8071]

Just found a new fetish. Foam on cars

[@ChemicalGuys]

Happy detailing!!

[@Seize_The_Karp]

gotta say i like this guy better than vince from sham wow 2.0

[@ChemicalGuys]

Hey Nathan! Thanks so much for checking out the video! - CG Nick

[@Doug_Hefernen]

Better to do this in the shade.

[@ChemicalGuys]

Thanks so much for watching!

[@mousie8660]

Must take more than hour to wash the car 🤔

[@sharkscarwash2554]

Great foam washing 💦💦💦

[@ChemicalGuys]

Thanks so much for watching!! - CG Nick

[@Engineering_Rebel]

First comment

[@gm08351]

congrats, what prize did you win?

[@mickea769]

Too old!

[@WolfmanZX]

I hate gardeners

[@ChemicalGuys]

Thanks so much for tuning in