How to properly setup the Dan Dugan Automixer on Yamaha CL or QL and a common mistake I see people make. ➡️subscribe for weekly videos! / @kineticprofessionals ➡️facebook - / kinetic-professionals-...
Пікірлер: 35
@KINETICPROFESSIONALS2 жыл бұрын
Just wanted to say, I do not think I know everything. If I stated something wrong or maybe could have said better. Please leave a comment. This channel is all about good times and learning !
@HellaJ5 ай бұрын
Thank you for this video, you clarified alot for me.
@davegee64107 ай бұрын
Great vid! I'm glad that you mentioned the post vs pre for the insert setting... That can prevent nightmares from happening!
@californiasounddesign39212 жыл бұрын
Straight to the point and super helpful!!! I recently took over a studio that was already setup and that was their exact issue, insert was not in the correct spot. Thanks man!
@KINETICPROFESSIONALS2 жыл бұрын
Absolutely!
@elbombastic-01703 жыл бұрын
Sometimes what I do is add pink noise but don’t set the gain pull too much but I use it as a way to deactivate the most recent open mic to prevent any unwanted noise
@KINETICPROFESSIONALS2 жыл бұрын
YES! I even made a video on this. I talked to Dan about that technique and he approves!
@empire_antz2 жыл бұрын
@@KINETICPROFESSIONALS I can't find that video, would love to know more about this, how and why it works!
@KINETICPROFESSIONALS2 жыл бұрын
See link kzbin.info/www/bejne/j3faqn2BoseYiKs
@KINETICPROFESSIONALS2 жыл бұрын
@@empire_antz see link kzbin.info/www/bejne/j3faqn2BoseYiKs
@edwillock4 жыл бұрын
Personally, I put my Dugan on insert 2 rather than insert 1, that way if there is something else to get inserted Dugan is still the last thing in the chain. Otherwise, great explanation!
@KINETICPROFESSIONALS4 жыл бұрын
I think I'm just a creature of repetition. I know if I'm doing a show that requires dugan, I put it in position 1. But , I were mixing more broadly I could see a s.o.p of inserting in the second slot. Happy mixing !
@DrewVaxination4 жыл бұрын
great video, ill pass this on in the future instead of spending 20 minutes teaching people the dug!
@KINETICPROFESSIONALS4 жыл бұрын
Thanks dude! Hope your doing good
@ArtimusSeal Жыл бұрын
Love this video bro!
@KINETICPROFESSIONALS Жыл бұрын
Much love!
@brianlagace257911 ай бұрын
Is there any way to have 32 channels of auto mix with 2 external Dugan MY16 cards? My QL5 doesn't see them. Thanks
@KINETICPROFESSIONALS11 ай бұрын
Yes. Link the cards and you will have 32. Takes 2 card slots and you cannot use them with the internal Dante 16.
@mohamadalbawab47703 жыл бұрын
Thank you so much for this video !!
@jmelotte44913 жыл бұрын
Could one send subgroups/"yamaha fixed groups" to the dugan? I see the insert tab, so, say I want 24 mics on dugan. Could I just make Mix group 1 Inputs 1-8, Mix group 2 inputs 9-16, and Mix group 3 inputs 17-24, then send each mix group to the dugan, Then turn off each input channel to stereo main and just route the 3 groups to stereo main then, send that stereo main to matrices for output? I mean, I guess I could do 16 groups of 8 and have 128 channels automixed?
@lawrencefernandes60833 жыл бұрын
Well Im going to find on a show ... Ill let you know if it works!!!!
@larsjorgensen29112 жыл бұрын
You can route it this way, but it won’t really be mixing all of those channels individually as intended. It will be mixing 3 channels from your 3 mix groups or whatever. All 8 mics in each mix could still be using up full gain as in traditional channel mixing and you’ll quickly run out of headroom.
@AnilKumar-zo2eu Жыл бұрын
Thank you so much sir for your packaged information
@mvilla367 ай бұрын
Thanks, awesome video
@KINETICPROFESSIONALS7 ай бұрын
Happy to help
@BuzzSmith4 жыл бұрын
Good to know! Thanks!
@KINETICPROFESSIONALS4 жыл бұрын
anytime !
@massimilianonati51122 жыл бұрын
You should point out that the post on insert is important as much as the thing that this position is POST FADER ! Then you should point out, most of all, that the Dugan works in the right way if every channel is fed by the same amount of signal (especially in broadcast where every voice have to modulate in the stereo (or whatever) at the same level), so, the lavalier in the stomach in your example have to be raised in gain (or by fader, so the post fader point out) as much as the voice of that person modulate at the same level of the others. The priority slide have to be used (in my broadcast experience always no more than 1.5 ) ONLY to prioritize dinamically one person on the other when they speak together (the host of a talk show).
@KINETICPROFESSIONALS2 жыл бұрын
Ok. I definitely brought up post position insert in the video. The video is meant to be helpful. Your information is helpful , and I always welcome adding information or clarification on any of my videos. Thank you for your comment.
@massimilianonati51122 жыл бұрын
@@KINETICPROFESSIONALS Yes, the video is very helpful but not pointing out my remarks could reach mistakes and could be very dangerous in some situations, especially the equal useful levels to be fed to Dugan and not use the weight instead. I don’t think the number of comments could change this truth.
@KINETICPROFESSIONALS2 жыл бұрын
@@massimilianonati5112 ok. Thank you for the additional information. I know you only want to be helpful and add to the information, thank you for that.
@mikekahrsaudioengineer67762 жыл бұрын
Or, you could just use the mute button as we did, when Dugan auto mixers were expensive analog pieces.
@bernhagen932 жыл бұрын
helpful thank you!
@tomskerritt55812 жыл бұрын
Thanks.
@pauloyoshizaki21032 жыл бұрын
YAMAHA : QL ; CL ; New Consoles ; Mesa de Som ; Parameter ; Controller ; Equalizador - Gráficos ; 24 Canais ; Ou de : 48 Canais ; Top : Consoles ; Top : Profissional : Aparelhos : YAMAHA ...........................................