how to put an 80 cc motor on to a 20 inch bmx bike

This is one way to put an 80cc motor onto a bmx bike. You probably don’t wanna cut the frame though 😎😑

[@danradl]

Surprised to find that this is your first build. Looks even better in person! Watched Boiling Point like you recommended as well. The fact that it was shot mise en scene was spectacular and the ending really got me.

[@MattafiedCooking]

Thanks man

[@streetrashorgold]

The gas can would go good on the handlebars but it would have to be custom built to set in the middle without interfering with ur turning.

[@MattafiedCooking]

Hmmmm…. Idk about all that but maybe I’ll consider it on one of my next builds 🫣🤣

[@greggorski2174]

Great video Tony! You did a really good job! Vary informative Hands-On! It was good seeing you few weeks ago. 🤘💀

[@MattafiedCooking]

Thanks! You too!

[@steveburford1936]

Hum, I wonder if he wanted to cut the frame??? Get over it,no going back now!!!

[@gearheadgaming2340]

Starting to look like a harley 😂

[@rogerstafford-wakeinc.2088]

Great video on the build. Thanks for sharing.⚙️🚲⚙️👊🏼

[@MattafiedCooking]

Yeah man.. I'm working on more videos too

[@rogerstafford-wakeinc.2088]

@@MattafiedCooking I like food too believe it or not. Either way thanks for your support as well sir. ⚙️🚲⚙️

[@skynjaydensdaddy]

the last build I did I ran the wires through the frame tube. i also made a chain tensioner that tensions off of the engine (turns out they already make them lol)

[@notthatdigusted7468]

Pretty cool I was thinking of doing the same thing to a cheap BMX Walmart bike.

[@MattafiedCooking]

Thanks. Stay away from the cheap bikes though if you’re gonna cut the frame. Also, if you don’t cut the frame and the engine fits.. please, please, please… upgrade the rear wheel to a mag or a thicker spoke rim.

[@notthatdigusted7468]

I only want to use a Walmart bike because real BMX bikes are too expensive and I still wanted to make a motorized BMX bike.

[@MattafiedCooking]

@@notthatdigusted7468 I just put another motor on a chopper style bike. Keep me posted on that Walmart bike. Just make sure you have good rims brother

[@zayinflick3107]

You deserve more clout. I’ve done this on a mountain bike, but now it’s time to try on the bmx. Thank you for the documentation of your experience. It’s solved a lot of questions I had before ordering another kit

[@MattafiedCooking]

Awesome. Glad I could help! Sorry for the late response.

[@phoenixarizona8441]

I have 27inch 88cc with thin racing tires and a 20inch BMX with a YD100

[@MattafiedCooking]

@@phoenixarizona8441 nice I had a yd100 but just switched to the bt80. Which runs really well

[@2strokinbikes]

24 inch frame 20 inch forks 20 or 16 inch pedal cranks work much better on 20 inch wheels no cutting involved

[@slothzombi307]

This should be titled .."Why not to put a motor on a bmx bike".

[@savagelifehotboyn.o2273]

Got the perfect bike to do this

[@MattafiedCooking]

Do it!! And post!

[@AlexNuget]

I havent watched it all through yet but you could definitely just weld a bar along the frames top bar just to help reinforce it. Wouldnt be pretty but help it from bending at all.

[@MattafiedCooking]

Yeah. I rode this bike for a couple of seasons. With no issues. In the process of rebuilding it. More videos to come from that

[@ItzM3yaBoi]

The way I solved the gas tank situation for my BMX bike build is I bought one of those shelves that you attached to the bike seat post and put the gas tank on that with an extra piece of tubing from the cut around the seat post under were you screw on the shelf so it wouldn't rattle down and rub the rear tire👍

[@MattafiedCooking]

That’s what I thought about…. After I did the build lol. Thanks for the information tho 😎

[@MattafiedCooking]

Do you have a video of the build?

[@caduceus33]

How is the frame holding up with the piece missing? Have you added any re-enforcement to it? Are you using it much?

[@MattafiedCooking]

The frame sits tightly on the motor head and there is no re-enforcement on it and I was riding it everyday until November at least 5 miles a days.

[@MattafiedCooking]

@@NubsWithGuns if it does then it does. Not worried about it. It’s a 97’ 440 redline built real strong but what eve.. I just hope it doesn’t happen when I’m going 40mph. We will see

[@MattafiedCooking]

@@NubsWithGuns also, thank you for the input… because if I’m a chef that makes salty soup all the time and no one tells me I’m making salty soup. Then I’m just a chef making salty soup. 😎 thank you

[@dannyoutlaw8001]

How did you mount the sprocket for the engine on those mag wheels....

[@MattafiedCooking]

Very carefully… it took like 2 days to figure it alll out. Had to cut the metal prices for the rag joint

[@matthewfredrickmfkrz1934]

Probably would be better to cut the seat tube spread the frame then close the gap

[@theFALLGUY01]

What kit is this and how much does it cost I’m thinking about building my old diamondback viper frame does it require cutting or welding?

[@MattafiedCooking]

Actually… I bought the kit off wish.con and it actually worked!!!! For like two years!!!!! It was like $130. 60cc china doll. Yea I cut the frame but the old school bikes are much tougher. If you have a newer frame then you should weld

[@shanegarry6214]

Can u tell me what kit u used .. and what are the dimensions of the motor.. I have a 24 in bmx bike I’m thinking of trying this .. thx for the vid👍 don’t wanna cut me frame

[@morrisjohnsonakamj6346]

use a bigger motor , small ones break down to easy

[@MattafiedCooking]

I just used an 80cc 2 stroke on it. The yd-100.

[@diatonicdoug6525]

Answered my question if a kit will fit in a 20 inch frame: it can’t

[@detroitdabboy7106]

He’ll too the fuck yeah! Rode her so hard the kick stand fell off!!! 😂

[@MattafiedCooking]

Yeah I fixed the kick stand issue.. sorry for the late response.

[@Adalbertomatos_]

For 20 inch bike You need 28 tooth sproket or 32

[@MattafiedCooking]

Yes, I put a smaller tooth sprocket on it and it works a lot better. Going to be posting a video soon.

[@christopherlastname7638]

Don’t do this you will die! Cut frame is a no no !

[@MattafiedCooking]

You don’t have to cut the frame it’s just what I did. All the other things I talk about in the video hold up to not cutting your frame. This was my very first build btw and I was an amateur at it

[@captnchris7244]

Oh god mateeeee!!! That would have bolted between the top bar and the saddle bar... Was sitting thinking please let him realise before he cuts the frame!! MATEEEE!!! That’s gutting! Engine would have sat higher but wouldn’t have hit the pedals either 😫 Would have had to raise the gas tank but not impossible

[@ChunkyWaterisReal]

thats a bad idea and you should feel bad.

[@SamZStuff]

Get a micargi 20". You can get it to fit without cutting the frame.

[@MattafiedCooking]

Thanks! I’ll look into that

[@AlexNuget]

is that the beach cruiser build thing?

[@SamZStuff]

@AlexNuget it's actually a boys beach cruiser. But easy to convert to a bmx

[@vicvicious13]

Did your frame break yet?

[@MattafiedCooking]

Naw man… stilll going strong!!!

[@vicvicious13]

@@MattafiedCooking I watched another build where he did the same thing. Good to know you haven't had any issues. Good video by the way.

[@Adalbertomatos_]

Jajajaja pretty Bad ass exaust 🤣🤣🤣🤣 that real funny

[@MattafiedCooking]

Thanks I try!

[@michaellegg9381]

You should have made a custom plate or a modified mount on the motor rather than cut the frame!! Its weakened it to a dangerous point! You should watch a channel called "rather be welding" he builds bike's and carts among many other things related to cars and bikes.. you will learn a lot there 😊 especially how to make a motor fit a small frame bike. The end product does look good but o wouldn't ride it if you are heavier than 60kg it will 100% bend in the middle..

[@MattafiedCooking]

Thank you for the comment. The frame is a strong frame. The motor helps strengthen the frame and also, I don’t ride it hard. Very conscious about the Integrity of the frame and never do wheelies or race it. It’s my everyday bike. And ride it 6 miles everyday.

[@michaellegg9381]

@@MattafiedCooking like I suggested go watch a channel called " rather be welding " you will learn exactly what to do to fit the motor and add support for the frame.. he specialises in mostly bikes and motor bikes and home made carts sand buggys and 4x4 rock crawlers all hand made from the tires up to the roof

[@MattafiedCooking]

@@michaellegg9381 thanks man.. I’m gonna check it out!!!

[@Adalbertomatos_]

He talk to much 🤣🤣🤣

[@MattafiedCooking]

Thank you. Just trying to get the information across

[@Adalbertomatos_]

@@MattafiedCooking jajajaja You answer My coment after 2 years and half 😂😂😂😂😂 You commitment with You channell genuine 😁

[@MattafiedCooking]

Sorry. I’ve been mia for a minute. My apologies

[@chancechannel1617]

We’re did you get the motor from

[@MattafiedCooking]

I bought this one supersizing through wish.com and it worked for like 2 years.

[@Adalbertomatos_]

La tercera siempre es la vencida 🤣🤣🤣

[@MattafiedCooking]

It always is!

[@austincallahan6236]

One thing BMX bikes is they don’t really have rear brakes

[@MattafiedCooking]

Most bmx bikes that I have rode have always had a back break

[@KB_Joys]

Deathtrap

[@Adalbertomatos_]

Jajajaja para montar eso no necesitas intrucciones hasta un niño de 13 años lo hace sin intrucciones 🤣

[@MattafiedCooking]

Thank you for the advice 😉

[@fernandoluna2224]

Massa! entendi porra nenhuma, mas deu pra pegar uma ideia.

[@MattafiedCooking]

@fernado Luna ?

[@stuwest5862]

Weak

[@MattafiedCooking]

How so? What could I have done better?

[@stuwest5862]

@@MattafiedCooking Not cutting the bike in half would have been a start.

[@MattafiedCooking]

I didn’t cut it in half, just the top bar. The motor mounts help stabilize the bike. Also, this bike is just a flat land rider with no jumps, bumps, off road riding or up hill riding. Furthermore, it’s a solid frame build in the 90s that is more stronger than cheaper frames made now a days. Any more insight? Im building a few more bikes and am going to post more videos and would like your input on what you would like to see.

[@user-kc2ru5xo4k]

It's a good idea, but you should've cut a cheap bmx frame rather than a vintage Redline.... also, YOU TALK TOO MUCH.... Stop repeating the same thing over and over. ... !!!@@

[@MattafiedCooking]

Thank you for the advice... I'll work on that