Thank you for another great clear how to do video 👍.
@JohnPhillips-qw4dbАй бұрын
Worked perfectly. Thanks for the electronic brake procedures!
@nazarettos6987Ай бұрын
@@JohnPhillips-qw4db you 🙏 welcome
@ramiromartinez43165 ай бұрын
May GOD BLESS ABUNDANTLY FOR MAKING THIS VIDEO.😊
@nazarettos69875 ай бұрын
Thank you so much for positivity. You can tackle this project yourself:-)
@joec21742 ай бұрын
I would open the bleed fitting on the caliper before compressing the piston. This preserves the hydraulic piston and seals in the system.
@nazarettos69872 ай бұрын
@@joec2174 thanks
@joec2174Ай бұрын
@@nazarettos6987 I was hoping to get a response noting if you agree. Compressing the piston pushes old fluid back up into the system. It can also damage the ABS. Opening the bleed valve beforehand also lets you know the caliper is ok and the valve will open when it’s time to bleed the brakes. As so you don’t waste your time by having to replace it after you reinstall everything.
@Alex13O12 ай бұрын
Your amazing, thank you for this 😎
@johnzhang96188 күн бұрын
Thanks a lot 🙏
@nombr8 күн бұрын
Good diy man, thanks for taking the time to film Can a guy use anti seize instead of brake lube?
@nazarettos69878 күн бұрын
@@nombr do not use anti seize, use caliper grease.
@JordanFavila4 ай бұрын
Great work thanks
@knight31316 ай бұрын
Great work, I was hoping also you will do the rotors since normally you want to replace the brakes and rotors at the same time. Since I only have 22k on my 2020 Rav4 I will wait until I hit 35-40k to replace them.
@nazarettos69876 ай бұрын
I don’t have pulsation when braking, car drives straight and my rotors are in great condition so i decided to leave them because these are OEM Toyota rotors.
@AP-bo1if4 ай бұрын
you only replace rotors if they are pulsating or really thin. otherwise there is no point. don't be suckered into replacing them. rotors should last easily over 80k miles under regular driving conditions.
@csan2552 ай бұрын
You can have them re-surface once. The shop near me charge $10.00 each.
@harveymudd14525 ай бұрын
Good video, but what are the two holes in the top of the New brake pads for? thx Datra
@nazarettos69875 ай бұрын
some brake pads have this thin metal spring that fits in there to help separate pads.
@danielcampos24705 ай бұрын
Gracias 🙏✌️
@gregoriojuarez157920 күн бұрын
Do you believe, that the same process for the rear breaks of a 2019 Camry would be the same?
@nazarettos698720 күн бұрын
@@gregoriojuarez1579 I think so, Toyota makes it easy. You can also put rear brakes in service mode by applying positive and negative cable 12v power and the piston is gonna retract.
@Henry-jo8ex4 ай бұрын
@Nazaretoos, thanks for the great instruction.. I have a question, Do you open the master cylinder resevoir(brake fluid) when your compress the brake calipers(piston) back to put in new pads during a brake pad replacement? or no need to do that step?
@nazarettos69874 ай бұрын
Yes i did, just so that brake fluid can expand. But i did not have issues with brake fluid coming out of the reservoir
@armedbobery48794 ай бұрын
I wish I lived in an area with no rust and I didn't have to take 30 minutes per wheel to clean and grind the bridges from rust.
@ViktorO6 ай бұрын
🔥👍
@danielhudson9470Ай бұрын
Is this the same as epb interlock deactivated?
@nazarettos6987Ай бұрын
@@danielhudson9470 epb is electronic parking brake. Yes these pads will work for Rav4
@pythonprogramlike45472 ай бұрын
Do the brake pads on each wheel of the Toyota RAV4 from 2019 to 2024 have inner and outer pads? thanks!
@nazarettos69872 ай бұрын
@@pythonprogramlike4547 absolutely yes
@pythonprogramlike45472 ай бұрын
@@nazarettos6987 thanks! After watching your video, I didn't see any separation into inner and outer pads, nor did I notice any difference between inner and outer pads?
@duyenchau81676 ай бұрын
You don’t have to install the shims on the front pads? Just notice now😮
@nazarettos69876 ай бұрын
yes you do,
@duyenchau81676 ай бұрын
Thanks for the prompt reply, sir. When I inspect my front brakes on the rav4 this morning, the 2 caliper pins resist coming out as I try to pull it. Am i suppose to wiggle it harder to get it out or how to do it safely w/o damaging the boots? Thanks again Dr. 😊 for help.
@dumbdumbdougie6 ай бұрын
Thanks so much!!
@nazarettos69876 ай бұрын
These Bosch are quite smooth and powerful stopping