Putting together a G-Shock Rangeman GW9400-3 (Green color) Casio Watch. Lot of tiny parts and sensors to reattach. Music by Unicorn Heads - Titled 808 Doorbell Chime. Enjoy and thanks for watching
Пікірлер: 45
@Itsmaikitosworld5 жыл бұрын
Tons of parts, Good job putting it back man.
@humanfilth660710 ай бұрын
for future reference, at about 9:15 that flat wire that you plug into the interface has a little release lever on the interface itself. it just pulls up real easy.
@bestopinion9257Ай бұрын
he destroyed the watch and will sell it as new...
@kratos76784 жыл бұрын
Have to service my O rings and straighten my E clips. Do you know how often the O rings should be serviced ? My Rangeman had buttons sticking and clicking when press due to dirt in the button housing. Buttons are working way better now all I have to do is lubricate the O rings and close it probably hope everything goes well.
@jaymads49155 жыл бұрын
Do those screws on the face plate of the watch do anything, mine won't tighten and keep turning? They seem to be in there alright but just won't completeley tighten up
@freeatlast19635 жыл бұрын
I wish Casio put vibe alarm on some of the higher end Gs. I'm an old dude and the alarm is just too quiet and no chance to hear it under a sleeve. I think there's a gap in the market for super loud alarm Gshock or vibe alarms (like when I rock my GD350) - us old dudes, who punished our eardrums with too many headphone hours, need some consideration from the mighty Casio.
@GiShockGo5 жыл бұрын
What do you think of the vibration on the GD350? Strong enough for you? I think it could be a bit stronger. I personally like the feature.... much more subtle and discreet than beeping, but give the user the option. Thanks for watching and commenting Freeatlast!
@freeatlast19635 жыл бұрын
@@GiShockGo I agree, if the vibe had two settings like the light has, a normal vibe and extra 50% vibe, I think the GD350 would be better. If they could fit this in a 5610 or similar square and drop the multiband in favour of just bluetooth and maybe put in a temperature sensor, I think that would be a near perfect G. What are your favourite Gs? Is it just me, or does the new Rangeman, look too much like a computer and not a G. What do you think of the GPW1000 and 2000. Too many questions, I know, lol.
@Danilo-jx8du5 жыл бұрын
After seeing how you assembled the watch, may I ask if the sensors of the watch still functions after you folded the ribbon/ connector witn your tweezer?
@GiShockGo5 жыл бұрын
Danilo 1310 yes luckily.... Have to be more careful though. Don't want to puncture or sperate and wires accidentally
@elzippo4884 ай бұрын
There is a reason that these watches are designed, mfg'd and assembled in a class 1000 clean room in Japan or Thailand.
@alexcienfuegos29993 жыл бұрын
How do you do the AC reset on the GW9400
@_GALLINA Жыл бұрын
I am getting puzzled: do you need a Panasonic CTL1616 lithium or a CTL1616F battery for a Tough Solar like Rangeman?
@devyn47452 жыл бұрын
there were two extra tiny springs and two tiny boards or sensors or something that came out of mine, that you didnt put back in yours. im not sure where they came from.
@stefanocillis99352 жыл бұрын
Can you remove the negative film from the LCD screen when making watch from negative to positive?
@juarezintlanfranciscojoel393 Жыл бұрын
Si
@kratos76784 жыл бұрын
I unplugged my sensor do I need to preform a AC reset for the sensor to work?
@GiShockGo4 жыл бұрын
Kratos the barometer will be blank because it resets the barometric pressure data.
@forispt52 Жыл бұрын
Good evening, I want to ask what happens when you open it with the waterproofing, is it still at 20 bar?
@GregSierra Жыл бұрын
As long as you replace the gasket, make sure everything inside the watch is seated properly, and screw down the back plate correctly, the 20bar resistance should not be compromised.
@user-vo8hs4nb7o5 жыл бұрын
厉害
@DavidM-722 жыл бұрын
Hi, I know this is an old video. But can you please tell me what battery is used in the rangeman? I think I might need to replace mine as it's not charging very well. Thanks
@pulkinpulman2028 Жыл бұрын
Ctl1616
@_GALLINA Жыл бұрын
@@pulkinpulman2028 but in video (despite stickers says CTL1616), the battery is a CTL1616F !!
@kratos76785 жыл бұрын
Hey do you know if Jomashop.com is reliable sources to buy watches from?
@GiShockGo5 жыл бұрын
Kratos yes they sell authentic watches, but no they're not a Casio authorized seller.
@kratos76784 жыл бұрын
Hello there! Have any spare parts for the Rangeman button assembly C clip?
@maxpayneau5 жыл бұрын
Dude just lift the white section of the socket to put the ribbon with no unnesesary force :)
@GiShockGo5 жыл бұрын
maxpayneau hindsight is 20 20 lol... Now I'll know for next time. Thanks bud
@kratos76784 жыл бұрын
Can’t get it to work any ideas on what I can do?
@GiShockGo4 жыл бұрын
Kratos what’s wrong with it? What did you do?
@kratos76784 жыл бұрын
I opened it up to service the O rings on the watch so I disconnected the sensor and plugged it back in.
@kratos76784 жыл бұрын
It’s reading Err
@GiShockGo4 жыл бұрын
Kratos it sounds like the sensor isn’t making contact. Make sure you close the hatch by pressing down on it after you push the sensor cable all the way in.
@kratos76784 жыл бұрын
Had no luck I’ll try again tomorrow. Thanks for the tip!
@hernancastillo75112 жыл бұрын
😵💫
@hulk15689 ай бұрын
He almost butchered that poor sensor connector... 😢