Cole, this series of videos was an absolute must for me when I decided to completely rebuilt my remote gearbox. I appreciate all you have done and continue doing. I did see your video today and completely understand what your going through. Take your time, do what’s best for you and family. Your following will still be here appreciating whatever content you put out. Thank you cole.
@186scott2 жыл бұрын
If you are rebuilding the magic wand gearbox it is set up the same way as the remote gearbox with the diff cover being slightly different also For anyone struggling to press the reverse detent to allow the reverse selector to slide through you can put the screwdriver or what you are using to depress it, down the same hole as you out the detent down and then push the reverse selector then when that has moved far enough you can pull your screwdriver out and push the selector rod the rest of the way
@edwinniroj Жыл бұрын
Thanks for sharing your knowledge
@classicminidiy Жыл бұрын
My pleasure! Thanks for watching!
@TheGentlemensMotorRacingTeam5 жыл бұрын
Handy Dandy Torque Wrench :) :) :) - Great video Cole - I will be watching this series over and over as I have a remote gearbox to rebuild when I get time - keep up the good work sir
@harow695 жыл бұрын
You dont have time... you've got a shell to repair... actually I dont have time either minis been in a stripped state 4yrs
@shovelrickshovelhead87134 жыл бұрын
That’s my box , er mini box , I should give her some love..
@classicminidiy4 жыл бұрын
A rebuilt gearset always looks so dang nice
@BMCWorkshop5 жыл бұрын
Great video Cole
@classicminidiy5 жыл бұрын
Thanks Sean!
@andrewhurst14729 ай бұрын
Thanks for making this. I have to ask if the selector shaft seal might have been put in backwards? Usually the coil spring side would face the liquid side.
@classicminidiy9 ай бұрын
This is an illusion of the video. The silver you see is not the coil spring, its overspray of silver paint. :-)
@petergoldsmith46066 ай бұрын
Cole, what circlip size do you need to use for the reverse selector?
@themightyimp082 жыл бұрын
is this a 22g1128 remote? Can anyone tell me part number for the flywheel casing that attached to a 22g1128 remote box? I've chewed my bearings and don't have the box in front of me at the moment to look for a part number
@MrKurns4 жыл бұрын
Does the reverse gear go in a specific way? Edit. Never mind. I got it.
@IsraelitesUnited3 жыл бұрын
Is it possible to remove the engine gearbox sump without taking out the engine in a classic mini
@classicminidiy3 жыл бұрын
Unfortunately no. If you have to remove the gearbox and sump the engine needs to be removed. The clutch and flywheel can be done with the engine in though.
@richardjolliffe25305 жыл бұрын
Why not use assembly lubricant while assembling the shafts? That sound of metal-on-metal is like nails on a chalkboard .
@classicminidiy5 жыл бұрын
All of it does have assembly lube on. It actually. I pre-lube everything. Most people assemble these boxes dry though, I agree with you, I just can’t put all that metal together without some oil!
@willbrown43 жыл бұрын
Has anyone got a link to the strip down video of the box that precedes this?
@classicminidiy3 жыл бұрын
Hey its part of my "Early 998 series" starting with this video: kzbin.info/www/bejne/qpfEopyFZ9p0sK8