How to Rebuild a Graco Xtreme Lower

[@jonclark8155]

Love y’all’s paint lines to. They are very abrasion resistant.

[@jonclark8155]

I’m a retired shipyard worker and painter blaster. I rebuilt those 60:1-45:1-56:1kings. Gaco’s are very reliable.

[@NW_JAX]

Glad to see some good detailed videos on graco pumps. I tear down and rebuild these pumps everyday

[@GracoProtectiveCoatingSprayers]

Please let us know if there are any other videos we should make. Always looking for new ideas from those using our equipment every day. Thanks!

[@rosedalepaint]

When in the field and experiencing a leak from the top of the cylinder, or a sticky ball in the piston, we've often put the sprayer on its back and removed the cylinder exposing the piston without dropping the whole lower leg. Because the throat packings are securely in place, guiding the piston, is there any real chance of damage when removing the cylinder against the direction of the lips of the piston packings? I suspect reinstalling it would be less risky because we're going in the direction of the lips. Thoughts?

[@cengizhanmalkoçoğlu]

Bilgileriniz icin tesekkur ederim

[@rosedalepaint]

Great video! Well explained! Thanks!

[@Smsabha]

❤❤❤

[@sankarreddy6703]

Thank you sar Taslaetason Hindi

[@silentghost7420]

Wish mine was that easy 4 years of paint🤣

[@woodyholloway43]

Great Video! Is there a full rebuild kit for this or a part number that you could share, or did I miss that? I need new packing's for the rod as well as the filter. The lower assembly is not creating any pressure, so I would like to rebuild it completely.

[@GracoProtectiveCoatingSprayers]

Woody Holloway Hi! Do you know what size lower/ pump is on your machine? You can then reference pages 27 - 29 in this manual: www.graco.com/content/dam/graco/tech_documents/manuals/311/311762/311762EN-ZAH.pdf Also might need a rod and cylinder as well. Please let us know if this helps. Thanks!

[@barssahin8655]

Merhaba Alt kısımdaki 3 adet metal contanın misket kovanının altında olmasımı gerekiyor Bizim yeni aldığımız boya pompaların da misket muhafazasının üstünde duruyor

[@princeruben9987]

If we tight the piston rod and packings, i cannot able to insert inside the cylinder since packing gets enlarge or expanded so due to that cant able to insert and set piston inside. Request you to kindly assist and teach me to fix pls.

[@yoru7969]

We install the pump back,but when we run test with thinner the pump stop/stuck...have you any solution for us.

[@mykell2100]

Is the piston stuck? Did you take it apart again to check the shims and packings? I have a similar problem. The pump looses pressure on the down stroke whiling moving quickly then on the up stroke it moves at a steady slow speed.

[@ezequielroque22]

What type of grease to you use for seals (o-rings)?

[@Prompokraska74region]

Супер!

[@Pal-8989]

Piston price kya h Piston lock ka price kya h Iska ring set kitne ka h

[@randywhite719]

where can i find torque specs for extreme 145 cc i cant find my manuel

[@GracoProtectiveCoatingSprayers]

Graco.com and search for manual number: 3A3164EN !