King Sprayers - Air Motor Piston Seal Service

[@jonclark8155]

Y’all’s air motors last a long time. Retired shipyard painter here.

[@GracoIndustrial]

Thanks for sharing! Your assessment means a lot, considering your experience.

[@chessPrabu]

Can it spray polyurethane water proofing material(is ther a video),what cfm air compressor is needed

[@GracoIndustrial]

The material compatibility depends on your specific material. The cfm air compressor depends on which King sprayer you have, as each model has different minimum compressor ratings. Your best bet would be to call Tech Support at 866-361-5959, Monday to Friday, anytime between 7:30 a.m. and 5:30 p.m. CST. Be sure to have your King model and specific name of the coating ready.

[@balozybaraka7230]

I learn something

[@GracoIndustrial]

Thank you for letting us know that you found this video helpful. For more about King Sprayers visit www.graco.com/king

[@jonclark8155]

I had to rebuild the shuttle valve in these

[@GracoIndustrial]

How did that go?

[@jonclark8155]

@@GracoIndustrial easy. All I did was change the rollers and put new gaskets in and cleaned it up. The sand from blasting got in the quick connect got in it. It didn’t make it to the motor though. It worked for 14 years after that. Of course we had tough stacks on hand to redo the bottom end.

[@GracoIndustrial]

@@jonclark8155 Good to know! Thanks again for your perspective.

[@ashgarali4222]

Good

[@GracoIndustrial]

Thanks! For more about King Sprayers, visit www.graco.com/king

[@نصرحسان-ق8ض]

الأحداث في الفديو