How To Rebuild a KTM/Husqvarna Clutch Master Cylinder

[@watts300]

The socket trick was excellent. 9/16 worked perfect on my Brembo.

[@BrettsGarage]

This is making my sunday afternoon project much easier. Thanks!

[@sorin.n]

Really liked the socket trick to install the rubber boot. :)

[@thecli]

Nice job... I wish you would make it more realistic, and show us the “difficult “ parts, instead of editing them out...

[@TheDirtyBirchTrails]

Ive done this on a dozen bikes. There is no difficult part. Exactly like he did it !

[@Ts157h]

If I’ve learned anything here, it’s that I shouldn’t have thrown my snap ring pliers through my neighbors yard

[@maikelnait4495]

Your comment made my day. Cheers!

[@damianomaggio]

At finish the operation can I put the brake liquid from the top altought from the bottom?

[@munghini]

What size is the tubing on the syringe vs the tubing on the bleeder screw?Also, I learned the bleeder screw is a 7mm and that none of my toolkits contain a 7mm wrench.

[@jodylarue2312]

Do you know of an aftermarket or brembo part for replacing the sight glass windows and seals on the master cylinders?

[@proknifethrower]

The tueni 16KTM 500 EXC bleeder valve does not actually have a hole pass through it bleeds at the banjo bolt crush washers only.

[@Bikebros27]

My son’s ktm 65 clutch doesnt seem to engage neutral properly. When clutch is pulled in it will either stall once you try to put it in gear. Or jump forward. Where’s best to start.

[@rmatvmc]

You could check the clutch basket. Make sure there are no grooves in the basket from the plates. If that is good your slave cylinder might need to be bled.

[@JB-th4bx]

What is the graphics kit that is on this bike?

[@brianjones7681]

Ok are you spying on me? I bought the rebuilt kit from rmatv a few days ago and was walking out to do this exact thing to my son's 65 SX when this video popped up!

[@MrMaksatT]

Now search handlebar bend comparisons thru their web. 😂😂😂

[@kendallpalladino9982]

now, if the plunger got pulled out of the boot, annd you cant get the boot back on, do you need to rebuild the whole thing?

[@alexcook5325]

Can you link a rebuild kit for 2014 ktm 85 please

[@carsonwhite7]

Where can I find the push rod? the kit I bought didn’t come with it and I can’t find one. 2017 husky FC250 Magura hydraulic clutch.

[@rmatvmc]

You'll want to check the OEM parts finder for your specific bike: www.rockymountainatvmc.com/oem-parts It should be part # 77713007000 but confirm that before ordering.

[@douglasguardado9626]

Do you have oem number for the complete kit or do I have to get part by part?

[@tonymartucci7097]

Nice video - really helped. My snap ring pliers are junk 😀

[@maikelnait4495]

Good tutorial! The fluid will go thru the rag...or?

[@yamaha450man]

Are you that dumb?

[@bajerpundaren]

THANK YOU!!!

[@maxharris5353]

Video helped alot

[@quentinroesch4412]

How do i know that if my clutch master cylimder needs a rebuild

[@rmatvmc]

Common signs that your master cylinder needs rebuilt are a spongy clutch lever, difficulty getting the bike into gear, and leaking from the master cylinder.

[@gregdunstan568]

Ahhh that freakin circlip!!!!

[@TD3_Archery]

Ok question. I have a 18’ fc450. The clutch stop working. Replaced the stock slave with a rekluse one, I can't reverse bleed if the line is hooked up to the master cylinder. If it's unhooked. I can. With the line off I can pull the clutch lever and zero fluid leaks out of the master reservoir even tho it's full. Is that a sign of a bad master?

[@Mike-gv4je]

I have the same problem have u found a solution?

[@rileynielsen7472]

I also have this problem did you figure it out?

[@TD3_Archery]

@@rileynielsen7472 I brought it to a shop, he thinks I have a stuck open injector but I’ll let you know for sure what he figures out

[@Jake_Rose]

Lol same Problem over here 😂

[@ricardocuetara1]

Great video. Thank you

[@IntoOurAdventure]

Where can I buy a master cylinder body?

[@rmatvmc]

You should be able to find the master cylinder body for your bike in the OEM parts finder. You can check it out here: www.rockymountainatvmc.com/oem-parts

[@treyatchleyatchley2194]

I need the plunger

[@rmatvmc]

The first link in the description of this video will take you to a page where you can purchase master cylinder repair kits or the OEM plunger.

[@MrMaksatT]

You mean KTM, Husqvarna, Beta, Sherco, Gas Gas, Bultaco and TM? Hehe

[@endurotruckererniedesjardins]

And Kawasaki

[@MrMaksatT]

@@endurotruckererniedesjardins Kawa has Nissin, others are mostly Brembo

[@TheMotorongo]

How much is the job cost actually..??

[@TheComputerBase]

€ 19,00 :D

[@gbtrails588]

like the video, skipped all the parts i need. wt..hell

[@Nico-ds9nz]

Why i should take of the whole master cylinder ? 😂 I did it on my bkie, bro you make ot komplikatet for no reason... Also i cant lose the bot that is holading the Line. The bolt is has to much corsion. Dont want to change taht... So i did that without taking off the whole clutchcylinder

[@shifty8237]

Very useless since half of those parts are near impossible to get out without destroying them

[@andrefleck3479]

Thank you :)