How to Recycle Used Engine Oil | How to refine used Mobil Oil by using bleaching Earth 2024

Рет қаралды 24,514

8 ай бұрын

Reclaimation of Black Oil using activated Bleaching earth.
Use sulphuric Acid treated oil for bleaching.
That distilled oil is free of sludge.Always remove sludge prior to Bleaching process.
In this video, we will see how a facility produces transparent base oil from used lubricating oils.
This facility uses well-calculated engineering to recycle used lubricating oils to save the environment and change our future.

Пікірлер: 44

@binwellmpundu239 3 ай бұрын

At what point do you add sulphuric acid? What other alternative substance can you use apart from bleaching earth?

@mansouryahia2798 4 ай бұрын

Purity is not only shown by what the eyes see We have to compare ingridents the chemicals befor and after compare it to new oil products

@Masterfixer 2 ай бұрын

Your explanation are cool... however, I want to ask what is the volume of oil been treated to which the 6g bleaching earth is added? In other words, what is the ratio of oil to bleaching earth. Also, what quantity of the acid is added, you only gave concentration (7%w) if I understood that well.

@pastblast 13 күн бұрын

I think 125ml of oil?

@i_02_shyantankundu32 7 ай бұрын

excellent job sir.. i also need some urgent advise.. how to contact u sir?

@ProudNyoni-ju5yz 2 ай бұрын

Information in not full

@adamcaldwell63 6 ай бұрын

Use high pressure filters

@mdarshad979 Ай бұрын

Please tell me what amount of chemical should be given to clean 200 liter full mobile

@MujahidKhan-ec3wq 7 ай бұрын

Assalamualaikum bhai which company bleaching earth is best one

@EarthChemEC 7 ай бұрын

Goodearth

@danielmanchi9084 4 ай бұрын

How long must you heat it when it gets to 220 degrees Celsius? I’m talking about the minutes or hours and can you add the sulphuric acid to the oil and then heat it to 320 degrees C as you said or you’ll have to heat it to 320 degrees and then wait till it cools down to 50 degrees before you add the sulphuric acid, and for how long must you heat it when it gets to 320 degrees? Thank you sir.

@EarthChemEC 4 ай бұрын

You just have to touch the highest temprature no need to continue heat on that temprature just reach that temprature then cool it down

@danielmanchi9084 4 ай бұрын

@@EarthChemEC thank you very much. I appreciate you brother

@danielmanchi9084 4 ай бұрын

@@EarthChemEC thank you very much. I appreciate you brother

@mohmmadsaeed8021 2 ай бұрын

Bhai apna Mobil no dy sakty hn?

@kelechikingsley5899 9 күн бұрын

What type of filter did you use?

@sagark7703 5 ай бұрын

How to treat (purify) transformer oil without heating? Any alternative!

@EarthChemEC 5 ай бұрын

Without heating will be less effective but you can using Granular bleaching earth method

@sergiosilva-co1tf 6 ай бұрын

Does it rust after a few days?

@maituub 6 ай бұрын

? " rust" oil does never ' rust' ; what do you mean?

@ppphhhh131 4 ай бұрын

Sir tonsil company ka bleaching earth acha hota hai kya ????????????

@EarthChemEC 4 ай бұрын

Not good

@ppphhhh131 4 ай бұрын

Any other company jo indian mein available ho

@jackmclane1826 2 ай бұрын

Just bleaching out the color back to "normal oil" does not mean it is any useful for use as a motor oil again. AT LEAST some viscosity testing at -20°C and 100°C would be necessary to show some relevant properties.

@EarthChemEC 2 ай бұрын

You have to add viscosifiers to maintain different viscosities.

@jackmclane1826 2 ай бұрын

@@EarthChemEC To get it anywhere close to modern oil specs, yes. Probably more additives.

@ppphhhh131 3 ай бұрын

Does temperature during filter matter

@EarthChemEC 3 ай бұрын

Yes if temprature is low,filteration will be slow.