How to quickly and easily refill a printer cartridge BROTHER MFC - J5340 DW

MIJN ANDERE KANAAL
MY OTHER CHANNEL
МОЙ ДРУГОЙ КАНАЛ
MON AUTRE CANAL
/ @onlineshoppernohcho1377

[@lulikb7547]

I bought original, after filled it once by ink ,next time the printer asks to change the ink ,but its full !!! I dont know how to clean the chip ,wich fixes the amount of pages. It dosnt work now. How to clean the chip???

[@nours2022]

Hi Does this printer print A3? Automatic two-sided printing And do you print at 300gsm thickness

[@repairandinvention6224]

Yes for different sizes A3 A4 and photos

[@lulikb7547]

How to reset a chip for each color???🙏🙏🙏

[@1minuteofgaming596]

Hello. Why did you drill a hole on the cartridge given that you refilled the ink through the nozzle of the cartridge. Does this process work in the long run? How many times did you refill till now? Thanks.

[@stockedfutur5776]

what is the blue pistole you use for solder the plastic holes ?

[@repairandinvention6224]

This is for thermal glue

[@jayaseelanpridhiviraj8731]

Thank you so much🙏 Can you please clarify my doubts I have the exact same model MFC-J5340DW Does this work with out the chipreseter ? can we fill ink from the hole you made at the top or from the side as you did Can we use normal glue or does it have to be thermal glue ? What do you recommend ? Again thank you so much 🙏

[@repairandinvention6224]

It worked for me without resetting the chip, but then after a while it stopped responding to the filled paint. Then I tried to reset the chip, but it had to be done before the end of the specified printing quantities. The number of papers to be printed is set on each cartridge.

[@jayaseelanpridhiviraj8731]

Can you please make a video on chip resetting please 🙏

[@cheese_im6713]

Hello can i do this at mfc j3540 dw brother printer?

[@repairandinvention6224]

Hello it's possible for all printers which have ink cartridges.

[@kennyjanealfajora4108]

Is it okay for brother LC-462?

[@repairandinvention6224]

This is suitable for almost all ink printers.

[@heinrichhertzsprung6889]

can you scan A3 format on this model?

[@repairandinvention6224]

Yes it's possible there a regulation part for A3 but i use a A4 format

[@WaseemAhmed-vl7jr]

Is there any chip resetter available form these model, Can you share it plz

[@repairandinvention6224]

I asked the Chinese who sell such devices, they said for such a printer model does not yet exist, but will be in the future.

[@szymonbrzostek9886]

do we have any news about chip resetter for the model?

[@thomass.9493]

There will never be a reset for this model. The printer reads the serial number of the chip and stores it permanently. Once a chip is marked as blank, the printer will never accept chips with that serial number again. So a new chip is needed every time.

[@jiara01]

what is the purpose of making the hole before you started?

[@repairandinvention6224]

Holes are made to pour paint in, then closed with hot glue.

[@jiara01]

thank you @@repairandinvention6224

[@tubeworm1]

Is there not a chip to reset?

[@repairandinvention6224]

Chip has not been reset

[@tubeworm1]

@@repairandinvention6224 Did you then reset the chip before installing in the printer?

[@repairandinvention6224]

@@tubeworm1 After refueling, I did not reset the chips, I just installed them back.

[@lulikb7547]

Hi, did you reset the chip in you printer? I got the problem now ,don't know what to do

[@lulikb7547]

But how to clean counter of the cartridge??? Thats a big problem

[@repairandinvention6224]

I did this without resetting the counter. There are special reset devices, but a counter reset device has not yet been released for this model. At least a couple of months ago I didn’t find it. They may have already been produced.

[@jarodova1]

FAKE : the printer remembers the serial number of the ink cartridge and even if the cartridge is refilled, the printer will refuse to consider it full.

[@repairandinvention6224]

Can you prove where exactly in the video something was faked?

[@jarodova1]

The Chip is for One Time

[@repairandinvention6224]

In addition to the chip, there is also a paint level detector@@jarodova1

[@jarodova1]

yes I know that, but as there is a counter of ink consumed, then the ink level is not taken into account. Only the count of ink used and count of memory is taken into account. Otherwise it would be too easy. Like all printers, you have to reset the chip at some point.@@repairandinvention6224

[@user-ly1fp7ut5q]

Sorry but I had to watch the entire video just to find out that you skip the details on how you reset the chip to be "full". This is not nice of you!!!

[@repairandinvention6224]

There was no chip reset at all. I simply filled the cartridges until I ran out of paint. The first refueling was successful but the second one did not work.And I didn't hide anything there.