Thanks so much for the great video!! just wanted to add my experience. got to the part where video says to dump out old toner and found that there was tonnes of toner spilling out! so i simply spooned toner back in, didn't bother using my new toner, reassembled cartridge resetting the toner empty 'flag' and WORKS LIKE A CHARM again!!
@tectalabyss6 жыл бұрын
Thank you I bought a refill kit from you. I subscribed,Liked,Shared and added to Playlists.
@michellopes97504 жыл бұрын
Is it really necessary to refill from the gears side? My cartdrige has a refill spot in the opposite side.
@hectormaciasayala18523 жыл бұрын
Exactly my question too. I'm gonna venture my opinion this is the dumbest video ever, but I've been wrong before.
@TheBlackBeltPanda9 жыл бұрын
Mine doesn't have those reset gears. How do I reset it?
@altidude39 жыл бұрын
+TheBlackBeltPanda you can purchase the reset gear from tm-toner. I believe that one reset gear comes with the toner refill kit. The starter cartridge that comes with a new printer doesn't include the reset gear.
@yournamehere69258 жыл бұрын
I just bought this with the reset /flag gear and new plug. Followed all the instructions and it keeps turning gear back and continues to say replace toner. Isn't the smaller gear next to it also supposed to be in a certain position so it doesn't keep setting it back? Your instructions are apparently incomplete since I am not the only one with this issue. ?????
@raba2d7238 жыл бұрын
These instructions are incomplete. In fact, BOTH gears need to be set to a certain position. My feeling is that this position is unique for each toner you buy and is indicated on the side of the cartridge (the two "clock" symbols that have arrows pointing to certain numbers). Maybe best to buy a printer without reset gears!
@yournamehere69258 жыл бұрын
+Michael Raba I fiddled with it and finally got it. I took a photo so I can see where to set next time.
@raba2d7238 жыл бұрын
Same I got it after a few hours
@Jrshort087 жыл бұрын
can you send me that pic? I'm having the same problem
@yournamehere69257 жыл бұрын
Sure...Let me see if I can figure out what I did with it. I hope I kept it cause it is almost time for me to refill again.
@xxh28 жыл бұрын
How is the print quality? Any difference vs. originals?
@superxglobito4 жыл бұрын
I have a problem and I' don't know why is this happening. I have an alternative tonner TN 2340 and I've tried refill it a couple of times. The thing is for some reason the center gear shaft, the next to the reset gear just stop spinning and get stuck, so the system doesn't work any more. I don't know why this is happening. The first time I did it I fucked it up, te gear shaft got stuck. The second time, no problem and all worked fine. Now, the third time I'm doing the procces the gear shaft is stucked again. I don't know what to do, please help.
@thorsaquatics63107 жыл бұрын
I install the refill kit but my printout are all black where were on the pages. How to fix?
@almo83868 жыл бұрын
Noticed that he didn't use compressed air like the script sad. Also others don't do this. Is it necessary? Al
@AffordBindEquipment6 жыл бұрын
use large hammer at 3:10.
@2006cr85r5 жыл бұрын
Does it work for the sample toner that comes with the printer
@AffordBindEquipment5 жыл бұрын
you have to buy the reset gear to make it work.
@JoeyChalhoub9 жыл бұрын
Do you NEED the reset gear?
@Moronvideos19408 жыл бұрын
On the HL L 2320 D PRINTER, the TN 660 and TN 630 cartridges have the gear You just lift it off. rotate it all around and reinsert. worked for me !!! EXCEPT you must use a genuine BROTHER toner. Easy to find on websites.
@AG-sx9ws3 жыл бұрын
@@Moronvideos1940 EXCEPT you must use a genuine BROTHER toner. Wrong. It does not depend on toner used.
@SIRKSxFUNK9 жыл бұрын
when you say replace the fill plug we have to buy new one each time?
@Moronvideos19408 жыл бұрын
No .... it is simply a removable cap that you merely put back on. Small bladed screwdriver will easily pry it off .... I went through all of this, it worked and was well worth the time doing it ...!!!
@AlejandraLopez-zj2ic5 ай бұрын
My plug broke off, a piece is inside where the toner goes. What do I do?
@kristinelliott23297 жыл бұрын
worked perfect thank you
@accartuchosesuplementos59054 жыл бұрын
como disse o Hancock no filme ....bom trabalho :)
@nyazmustafa89948 жыл бұрын
thanx , good job
6 жыл бұрын
CUANTOS GRAMOS
@rickymaldonado54215 жыл бұрын
75
@TMToner9 жыл бұрын
@ripptydevibes25814 жыл бұрын
All these videos claiming to be TN630 are NOT tn630
@TMToner3 жыл бұрын
TN-630 and tn660 are the same cartridge , the only different is the reset gear
@lindasalfen5936 жыл бұрын
Just keeps saying "cartridge error" grrrr... it was fine last time I did it!!