HOW TO RELEARN TPMS SENSORS SENSOR ON CHEVROLET CRUZE CHEVY SONIC

[@ElectricalCarRepairLIVE]

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzbin.info/door/k_lcDzEWLs5fVRYceK3-9Q ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

[@lexortz]

If i change the size of my car from 16" to 18" can i still use the same sensors? Or I'll have to purchase new ones?

[@motivated2428]

This is not working for me. My front left side is not showing a pressure at all

[@timraup4888]

This is the second time your videos helped me figure out an issue. First was swapping brake pads and rotors at the start of the year. I'm glad to have a resource like you guys available.

[@frankelijah1]

Wow............that was Very Informative! My Sensor has been "backwards" for 2 years! Thanks!!

[@23ezdunks]

Thank you guys for making these videos. I have a 2014 cruze and I've done a lot of work on it myself with the help of your videos.

[@Mikertt]

Thank you for the video! I got all that done in about 15-20 minutes. Much appreciated for all the work making this video.

[@ava16-b9z]

You have helped me so much to fix my 2014 Cruze all your videos are professional and very helpful I love all your videos .Thank you such a good person

[@23ezdunks]

I have a 2014 also and I've done all the repairs on it myself with the help of these fine gentlemen.

[@codydhoward1]

If I put different rims on can I still do the same procedure even though if they're not the same rims and valve stems

[@hunterzisland]

Thanks for this. You sound like my sons dad.

[@diegocarbajal6020]

Thank you I'm hoping this works in a 2014 chevy sonic, thank you for sharing your knowledge!

[@margaritaevalentine9483]

Thank you for the video it was very helpful, I keep being told I need new sensors for my tires, and they are running me a 100$ each and I still get the error messge.

[@RowSaga]

I did this procedure with my 2014 ltz rs and it did not work. May you help me here?

[@jeremyjackson6267]

I'm def gonna try this. i bought new sensors and it won't read any of them after getting them installed at a tire shop.

[@rudolfschmidt1445]

This procedure did NOT work on my 2014 1.8 Cruze. The message center said all the right things, the horn honked the same, and the front left marker light came on. However, no amount of pressure release from 50 psi down caused it to relearn the first tire. I’ll just live with it for now. No way I’m going to the GM stealership to be charged for something that was made inherently complex for no apparent reason.

[@gamechip06]

Your tpms went bad, you'll need to replace the sensor

[@Broke2built]

Take it to a small shop they should scan the sensors for free at least where I work they do at Tireman and belltire

[@higiniosanchez9532]

You are the best guy Thanks for video ,will try Thanks again

[@thusrday]

What do I do if my 2011 chev cruze have dashes on all 4 tires in where the numbers suppose to be showing tire pressure

[@Devilofaguy]

So I followed this to the letter. It beeped for me to begin,But never beeped for me to stop at first tire. From 49psi to 20. I tried all tires. Never a beep. 2015 cruze. Where did I go wrong sir

[@mikemaness6804]

mine is doing the same thing

[@borshardsd]

Lol same

[@cesar_serrano]

x4 Same!!!

[@gamechip06]

Your tpms sensors aren't working, the car isn't beeping because it isn't getting any info from the sensors. You'll need to replace the sensors.

[@cesar_serrano]

@@gamechip06 my car is beeping when start the procedure and the screen in the cluster show the 4 measurements of the tires

[@kimr.9906]

I love school of KZbin lol I'll give this a try on my Cruze which happened yesterday with the TPM

[@kimr.9906]

Thank you

[@travond9364]

My TPMS isnt reading any of the tires psi levels on my 2013 chevy cruze, what would be causing this?

[@ricksonn8714]

2012 Chevy Cruze followed you directions . It all worked until I let the air completely out of air and 1tire never made horn beep ? What should I do ?

[@Devilofaguy]

Replace that sensor

[@ganjabeats2540]

i had all my sensors replaced after none of my monitors could be detected. they worked for a little bit and then later that day went out again. the place i got them at said that they can’t do anything about it because it’s a problem with the computer not being able to read the sensors

[@margaritaevalentine9483]

was it your system that had that problem because that is very uncommon

[@stephenheiden5536]

what is the most common part that gets plugged with fix a flat. The the tire valve itself, or that unit it plugs into? I have a sensor that was plunged with fix a flat

[@zanderleenoche5855]

How to relearn throttle body manually?

[@gamechip06]

This process isn't working for some of you because your tpms sensors are dead or not there.

[@ErickFooty]

My car doesn’t beep when I deflate the tires a little 😭

[@Elkins24]

I have a 2017 Chevy Cruse LS, this did not work for me, I tried it twice filling the tires with 51 pounds of presure on each tire?

[@MoreT3ch]

Where you able to reset? I cannot find that step in my car

[@wayfairdeluxe]

Might need a tmps relearn tool. Can get one off Amazon for around 30-40$ depending which one you want.

[@tahoefisher5311]

Thank you for all videos

[@ColaChelsey]

This helped me. Thank you

[@LowVlogDrives]

Very helpful, thank u

[@toebro04]

I have had people come into the shop with 105 psi in there tires because of a bad tps

[@lods7185]

Will that method work for replacement of a bad TPMS sensor?

[@hermanreyes9850]

My car don't show the pressure on the 4 tires....help

[@franwuanwilliams4819]

Are those tire sensors are they automatic or u gotta program them remotely

[@jabroanuntak8777]

Is a good video thanks u

[@DrivingDrew]

Why up to 50 psi?

[@Prem-x4y5n]

Watch the video fully brother. He then releases the air out for the sensor to learn KPa/PSi.

[@jonathan_gariepy9765]

What if I have aftermarket tires, that probably don’t have sensors? How do I remove the icon on my dash?

[@NoName-writer]

Not working with Sonic bc no such time in the menu!

[@ColaChelsey]

What is the name of the tool you use to remove some of the air?

[@Sweshification]

Called a manual tire gauge.

[@joeschuett395]

Just use small flat head screwdriver 🪛

[@MakingitMoist]

I don't have that mine is a push button

[@joshuarussell138]

I did this and now my sensor reads blank :(

[@javierbotello7364]

Good job

[@marquiseharris9013]

Didn’t work for my 2014 Ls Chevy Cruze

[@borshardsd]

Ty

[@s_kan5885]

So who’s honking the horn? 🤣

[@brandonberry3200]

The car does it when u put the right amount in

[@yortchylanissancita3583]

My wife’s care says it’s 102 PSI lol what’s wrong

[@Puppetworld15]

Subtitles please

[@Manuel-so7mz]

LOL

[@simplycollazo]

8

[@Johnssong1308]

Talk too fast.

[@Canjeex]

You have time for such a silly comment, yet you have no time for the rewind button or go watch someone else teach your dumb ass doesn't know.

[@IBtwoo]

Can anyone understand Count Dracula ????

[@ultrakool]

he said, "I vant to drink your blod"

[@monkeyfoot5377]

Didn’t work on my 2016 Chevy Cruze ltz RS….

[@derricksachvie6747]

This did not work for my 2014 Cruze Diesel