How to reline a Hyper Tough trimmer revised

[@OhGodMuffins]

Thanks to John and to you for updating this video, cause I have this exact weed eater and my bump feature never works. Now I know it's cause I'm loading my line completely wrong! Cause I also tossed my manual. 🤦🏽‍♀️ Thanks!

[@GenerationX1971]

@@OhGodMuffins I have the same problem with manuals. I’m really bad at tossing them out or just misplacing them. Glad the to hear the video helped you out.

[@scottyboy1975]

My gf asked me how to do hers and I have her a little grief for buying this brand, instead of a Stihl or Husky, I am going to her house to try to do hers this afternoon. Hers is battery operated, so everything I was finding were NOT like this, but hers seems to be like the gas one you have here. This looks super easy and better than my Husky!! Lol Glad you took the time to make this video brother!

[@GenerationX1971]

@@scottyboy1975 thanks. I hope it helps.

[@forrest1518]

Great video, this is exactly what I needed to know, thanks 👍🏽

[@GenerationX1971]

@@forrest1518 cool bet glad we could help you out 👍

[@bobbytroutman857]

Wow thanks that was quick and easy

[@GenerationX1971]

Glad we could be of help.

[@rogerriojas3653]

Thanks brother works awesome. This was very helpful video.

[@GenerationX1971]

Glad to be of help

[@leewasden6735]

Thank you I did the same thing then watched your video then instantly did it thanks

[@GenerationX1971]

Glad it helped you out.

[@coamito23]

Thanks for the help🙏🏻

[@GenerationX1971]

Glad the video helped.

[@alexander2685]

Omg just used this for the first time and did not know how to put the red top back on your a lifesaver ty sooo much.😊😁😉

[@jeremydehart7466]

Thanks so much brother, you saved my life and my brand new hyper tough weed eater.🤣 I threw my manual away to, and almost went ham on my weed eater, and that ain’t no joke😳🤣👍🏼

[@GenerationX1971]

Glad it helped you out. So far ours has been a pretty decent trimmer. About time to wipe the dust off since spring is here.

[@brex8118]

Great content!

[@GenerationX1971]

Thanks I appreciate it.

[@franki9736]

I have to say thanks! I did have my original instructions, and they were very unhelpful. I could not get the spool reassembled. I came across this video, and it was together in five minutes. I wasted an hour before that. The original instructions actually say not to unassemble the head but instead fish the line through the assembled head with the nob set to the load position and then wind it up. I wish it was that easy, but it got stuck, and I had to unassemble it anyway.

[@GenerationX1971]

Nice to know we could be of help. Thank you.

[@k13e14b15]

Why take the spool off the unit? I leave mine on the unit when adding line.

[@GenerationX1971]

I fully agree with you. I had a different video of spooling like your talking about and deleted it by mistake.

[@yeseniagarcia9349]

Thank u so much for video , I had so much trouble putting that part back together. Very helpful video

[@GenerationX1971]

Not bad to do after you do it once. Thanks for the comment and glad it was of help to you.

[@unknownshhh4860]

Thank man !! I was about to break this shit haha !!! Save me the melt down of trying to put the dam thing on

[@GenerationX1971]

I’ve been there lol

[@unknownshhh4860]

@@GenerationX1971 dope username And yeah shesh it went on so easy without using all the strength I was using

[@CHRISRATKA]

Good for you you are a true gentleman just wanted to let you know was on the struggle bus with mine this afternoon noon came across this video 🎉 thanks you.

[@GenerationX1971]

Thank you

[@tonyutomiutomi3560]

Very good video. You made lots easier. Thanks again, my friend.

[@GenerationX1971]

Glad it could help you out.

[@rjtuhuh1]

Thank You !😁

[@GenerationX1971]

Glad it helped.

[@frankstocker1921]

Thank you again.

[@ReginaBarnett]

So glad it's easy to load the spool. Thanks for this video!!

[@scottpolenske9224]

This works for the 20v battery string trimmer also!

[@masterlee4370]

I bought one and my boss re spooled it totally different than the way it is done in this video. The video makes so much more sense and is a lot easier than the way he showed me. Thanks

[@GenerationX1971]

Glad it could be of help.

[@gatab0ricua1976]

Thank you! This video saved me from throwing my trimmer across the yard.

[@GenerationX1971]

Glad we was able to help out. It’s not bad after a couple times of doing it.

[@jlddaughter]

Thanks to both of you. Lost the book. Couldn't figure it out.

[@GenerationX1971]

Glad we could be of help.

[@generalwainwright9074]

Thank you this video was very helpful I appreciate it

[@GenerationX1971]

Glad to hear that. Thank you

[@brandontackett9747]

Thank you so much this was so frustrating 😂

[@GenerationX1971]

After you do it a couple times it’s super easy. Glad it helped.

[@MarcoGarcia-db2cs]

Thank youuuuu

[@GenerationX1971]

Glad we could be help 👍

[@dr.keithw.kirbyd.d.9979]

I bought mine at Walmart last summer at Walmart. And with my dyslexic mind, you would have laughed all over yourself at me when I tried to re-trim mine today. And then when I started it, then only one side would come out when I tapped it on the ground. lol. That was as funny as a screen door in a submarine. lol. Anyway, I'm glad you did this second video. I know where I went wrong, and I'm on my way out the door to the back to correct my dyslexic mistake. LOL. Dr. Keith W. Kirby D.D.

[@GenerationX1971]

Lol glad it helped.

[@jcort5204]

Thnx man. So illustrative, honestly. Just exactly what I was looking for…

[@GenerationX1971]

Thank you. Glad we was able to help you out 👍

[@terryrice3135]

Dude, I threw away the box, instructions, etc... however, Perfect instructions, I Also, did it myself 1st, and wasn't right at all... but now, after listening to this, 3 minutes and done! Gotta go now, it's 104" heat index! Peace out ✌ T~

[@GenerationX1971]

Glad it helped 👍

[@kelza2005]

Your awesome for this, thanks it worked as simple as 1,2,3... I also tossed the manual

[@GenerationX1971]

Glad it helped you out.

[@corinamontez6407]

Wish you had shown how to get it started. I have one and can't get it to crank up.

[@GenerationX1971]

My son uses the one in the video almost everyday. He primes it a few times then he chokes the crap out of it until it acts like its going to start then he goes half way on the choke and it fires up. Sounds like a lot but he has it running in 4-6 pulls.

[@DaGreatBrandonie]

I also made the dumb mistake of tossing the manual. Thanks for the video

[@sherryleeperdue9576]

Thinking about buying this brand. Thanks for the demo. Is that a Weedeater brand featherlite I see there? Is it straight or curved? Mine just died after years use. I sure miss it. Please reply. Thank you

[@GenerationX1971]

I’ve had pretty good luck with the Featherlite trimmers. I have both curved and straight shaft. These Walmart brand trimmers are basically the same thing. They run pretty good and are not really that heavy.

[@sherryleeperdue9576]

@@GenerationX1971 Thank you for replying. Is the curved shaft a single or dual line ? I have a dual line and I am not a fan. If yours is a single line, would you want to sell it? I sure do miss mine. I have a lot to trim. Thank you Again

[@GenerationX1971]

@@sherryleeperdue9576 pretty sure the one I have left is a dual head straight shaft. I give them away in the neighborhood to the teens to go out and cut lawns so they can make some money. Helps keep them out of trouble.

[@sherryleeperdue9576]

@@GenerationX1971 Thank you. I sure would love to get my hands on a curved shaft. The straight is too long for me. I sure appreciate you for replying. And, that's a great thing you are doing for those boys in your neighborhood. Keep it up, sir. Have a good evening.

[@sherryleeperdue9576]

I just bought this brand trimmer. 17 inch 26cc, curved. So far, I'm loving it. Lots of power. Sure beats my Echo 😊 Thank you for your replies.

[@davidbowles7026]

Thank you I now know how to do it much appreciated

[@GenerationX1971]

Glad it helped you out.

[@maxrice6603]

I’m strongly considering this weed eater from Walmart late this summer, But I’ll probably get the curved shaft just for the budget and price.

[@GenerationX1971]

I got really lucky and caught them on sale. The one I put together seems to work good. The last time I used it was a friend of mines house and ran three tanks of fuel back to back trimming and it didn’t miss a beat.

[@ronaldmartin9357]

I can't believe this is so easy

[@GenerationX1971]

For being a cheaper made trimmer we’ve had pretty good luck so far. When we take them out to my boss’s house they it takes about two full tanks in each one to do all the trimming. That’s only stopping long enough to fill the tank up. Second season on them. Pretty sure one is about ready for a new plug though. Thanks for watching.

[@albertlous16]

This video was so helpful bro and thanks for doing it again and being so humble about it.Awesome!!!!

[@GenerationX1971]

Glad it could help 👍

[@andreaabdullah1759]

where can I find a bump knob for this trimmer having a hard time finding it, thanks,

[@GenerationX1971]

Have you tried Amazon and EBay ?

[@RFCPFM]

Wrong! My hypertough from 2018 doesn’t have that head. Anybody know hOw to respool the older hypertoughs?

[@GenerationX1971]

If yours is a different model Hyper Tough that doesn’t exactly make me wrong. What’s your model number?

[@marcello1821]

My line won't feed

[@GenerationX1971]

On one of ours had an issue with the spring that kept it from letting the string spool out. Possible the spool head itself is bad. I would just go back through the loading process and double check the way it’s loaded just to make sure it’s correct. If it looks good and you’re still having the same problem you can get a replacement head at Walmart but you might find it cheaper online. Hope that helps.

[@vintagethrifter2114]

If you came here looking how to spoil a Hyper Tough weed eater, skip to 3:45 and save yourself three minutes and forty five seconds of meaningless talking.

[@GenerationX1971]

I love to talk I’ll give ya that.

[@vintagethrifter2114]

The rest of it was actually pretty informative and helpful, the first three minutes just took forever.

[@GenerationX1971]

@@vintagethrifter2114 trust me it’s not the only video I have like that. I get to going and have to remind myself to shut up sometimes.

[@rochavez3]

Thank you and yes Patience is the key I couldn’t get it but I finally got it it didn’t help that my nails are long smh 🤦🏼‍♀️

[@sponduli]

might be easier to crimp w a pair of pliers after you get the sides even so you can see

[@GenerationX1971]

That’s not a bad idea 👍

[@johnhora4644]

Damn!.....I'm famous!!......😉

[@nozb615]

I appreciate it!

[@GenerationX1971]

Glad it helped 👍

[@ReginaBarnett]

Is it that hard to crank? Geewiz.

[@GenerationX1971]

It’s not as bad as it looks. I have a really bad shoulder.

[@shackledtext2391]

Alot of talking. I'm trying to get my grass cut

[@GenerationX1971]

I’m a talker sometimes. Got the gift of gab lol. Hope you got your grass cut.

[@shackledtext2391]

I did good sir! Thank you for the video it did help. I like the system. Kinda easy!

[@GenerationX1971]

@@shackledtext2391 my son and his friends use the trimmer in the video cutting grass around the neighborhood. Took him a couple times but he got the hang of it.

[@ronaldmartin9357]

You know what I suggest that if you're a believer in Christ don't try to go it alone you better read the manual your spiritual manuals call the Bible if you want to make it home 😇❤️🙏🙏🙏🙏

[@GenerationX1971]

👍 best manual out there.

[@StevenMorris-vr8to]

I don't have a cap like that

[@GenerationX1971]

@@StevenMorris-vr8to could it be that I have it apart in the video? If the spool head is together the part of the spool that faces the ground should have a couple of arrows on it.

[@cartb3569]

I thanks God I don't have to teach abraham slaves and servants nothing @ that mental illness is real .Titus 1:10-14 ,the Bible isn't talking about Jesus or Abraham liars . Message

[@JeffreyEdwing-nm1yj]

U don't have to take the head off to put the string in.

[@GenerationX1971]

You are absolutely correct.

[@philliphall5198]

They beat nothing and really for the money they last a pretty long time 😊

[@GenerationX1971]

We had good luck with ours. I’ve noticed over time dealing with people that it’s like other things and comes down to personal preference. Some people just prefer a certain brand.

[@luisprieto9813]

Yep what a piece of engineering crap.... never will I own this, just thought I'd help a friend out,. Nothing is simpler to use,load, than an Echo. Thanks for the update on reloading this .. it's almost like a 4hundred head but hard to put the head back on to the housing.

[@GenerationX1971]

I have to agree it seems like a cheaply built trimmer. I used it a couple times last year at home and once at a friends house that has yard that takes about 45 min worth of trimmer work. I ran it pretty hard at his house just to see the outcome. It held up. Biggest downer for me is the trimmer head design and the 2 piece shaft design. Seems to be ok for small yards. Running wise it didn’t miss a beat. One of Walmarts finest I guess. It’s definitely not worth regular price.

[@lamah3]

lol might want to delete the first video for the poor soul who might just only watch that one

[@frankmiller3905]

This way it didn't me five minutes but that other way was terrible

[@budgunter8950]

I just picked one up with no gaurd or Cap on the head, still has the original line in it. Does anyone know the part numbers for the Head and the Guard? Thanks!

[@GenerationX1971]

I looked on the guard of mine but did not see a part number. You might get lucky with a basic google search.

[@GenerationX1971]

I done a basic search on google with the name brand and the trimmers manufacturer number and it came up with all kinds of parts. Between Amazon and Ebay there was pretty much anything you could need for it.

[@GenerationX1971]

Might have found the part number for the guard. 528731 A1. Found that number after I started cleaning the grass off from using it today. Hope it helps.

[@budgunter8950]

@@GenerationX1971 Thank you, I've not had much luck finding them. I appreciate your help.

[@roblescarlos5540]

Is the worst tool