How To Relocate A Start & Kill Switch On Your Honda Shadow Build

[@longdong3889]

I'll start using the uninsulated butt connector, 25 years of fixing motorcycles and I'm still learning things 😁👍👍 great video

[@Road_Rash]

You never stop learning until they close the lid on your coffin...

[@YerGoodBuddyKeith]

Thanks this gives me a better idea than the diagrams did. I'm trying to swap out my 99 vt750 killswitch start button assembly with a aftermarket one. I've got 3 buttons and want to wire my headlight up to one so i can a warm my bike up without blinding everyone at work or the camp site till I'm ready to take off. While not a walk through i think i can experiment and figure it out. I'm not a big electrical guy but no better time than the present to learn.

[@TJBRUTALCUSTOMS]

Good luck!

[@tacoman5416]

These are great must have tutorials TJ. Thanks for putting in the time to show us how to use your stuff.

[@leighmyers440]

​@@TJBRUTALCUSTOMS I dont use a back brake hardly at all any to keep my front switch?

[@joecalandriello8576]

Thanks for the tutorial it was helpful. I have a 1985 Shadow VT700C that I'm trying to connect the start switch to a push button switch that has 2 pigtails. I connected the yellow/red wire to one wire and the black/red to the other wire on the new switch but it's not working. Those seem to be the 2 opposing wires on the original start switch. I tried the black on one side also, but it's not working. Any help would be appreciated it. I must have it wired wrong.

[@xfer43]

Love the lesson on non-insulated butt connectors. May go exclusively to that!

[@immelting9834]

Nice , this should work on my 07 VTX 1300c. Great video.

[@mattduncan5500]

really good clear video . made it look easy , often these vids leave you more confused than before

[@khiraminifee7853]

How can i hotwite my 2004 suzuki katana 750

[@WARHOL3F]

Rad man. Thank you. Learning as I go, but wiring seems daunting. Appreciate your help...( and patience with the rookie questions )!

[@chalodelatorre7708]

The Insurance Store excellent muchas gracias amigo Como puedo reubicar las direccionales

[@MichaelSmith-lf6yc]

Very easy to do and I hate dealing with electrical. Only thing I did differently was I opened the wiring harness just above the heads and pulled the wires back there that way I didn’t need any extensions or crimps

[@pariah1978]

Great videos! Very informative since I just got a VT600 will do this soon thanks TJ!

[@tytews8159]

Awesome video, will be doing this. Quick question though, what do we do with the remaining wires going into the plug?

[@matthewsmith6497]

Does this still allow for the headlight to come on with out additional wiring?

[@bumblebee83191]

Very helpful. Only solid video i could find of this. Thanks!

[@brokenlt9586]

Tracing my wires back from the start and kill switch it runs to the red plug not the green. (02 600 vlx) The green plug ran to the left side... Probably best to look up the wiring diagram before doing something like this

[@brennanthomas6643]

So with wiring it up this way do I have to do anything with the headlight wire. Where it comes on with the key since I’m taking the high beam switch out. I don’t need the high beams anyway. Just the headlight

[@burnscory3420]

So I have a 1977 gold wing an the starter button broke on me there’s three wires to that then 2 wires to the kill switch or the off run off switch how would it wire them up to a push button like that

[@crazywoodguy]

So in doing this, does the key become the new kill switch?

[@lucyfuir6386]

Pretty sure you would still have your kickstand kill switch.

[@godfreemike]

How does this work when you have to pull on your throttle as well as engage the clutch all the while pushing the ignition?

[@lucyfuir6386]

I don't know about you but I have a 2001 shadow saber 1100 and I only have to pull the clutch in if it's in gear. If the bike is in neutral I can just start it with just the start button. Never had to touch my throttle to start it.

[@lucyfuir6386]

When my keyed Ignition stopped working I looked up a new one and they wanted about a $100 or more. I went to home depot got a 5 Amp toggle switch ($5) wired it in the keys place with bullet connecters so i can by pass that switch in a pinch. I still put the key in for looks.

[@TJBRUTALCUSTOMS]

👌👌👌

[@ryanwilliams3369]

Just did this to my ace. You the man tj

[@nathanielselvidge4157]

Going to do this to my spirit. Have any problems?

[@ryanwilliams3369]

@@nathanielselvidge4157 no you shouldn't Just know you're gonna have to do stuff behind the headlight. At least the ace is that way.

[@nathanielselvidge4157]

@@ryanwilliams3369 Well shit... I didn't know that. And i just got my single cable throttle assembly... Was planning on cleaning up my handlebars a bit

[@vp8589]

On the VT1100 the blue/ white wire feeds the headlight hi/low switch. Have to tie it into the black/red wire or you lose power to the headlight.

[@TJBRUTALCUSTOMS]

This is how i wire my headlights - d33v4339jhl8k0.cloudfront.net/docs/assets/5a6f7e612c7d3a1eaf1e12ff/images/5af357c22c7d3a3f981f6ca6/file-QtYvE1PNBg.jpg

[@Gino_Bells]

Heyy! I got the start button working! (Without kill switch) and i also rewired up the headlight. I an unsure how to connect the remaining wires in order to keep my licence plate light that operates off the bikes running power. I am ok with not having the front brake switch but id like to keep my licence light! Help plz :)

[@mariocevallos8134]

How did you rewire the headlight. I’m trying to put it on a toggle switch since I’m getting rid of the cluster on my handbars

[@faredce]

@@mariocevallos8134 any luck with that project? iv got that in mind for my vt750 clean up the handle bars. the wiring looks so simple but i know ill be in the shit if i make a mistake haha

[@bambinocustoms5497]

How many AMPS it's you push button than you are using??? Thank you

[@giftcurse6628]

I kno im late but do you have any references to possible do this on 83 vt500c mine doesnt have those midway connectors i believe mine goes directly to the junction box.

[@TJBRUTALCUSTOMS]

Man im sorry but we really dont do anything with the 500's they are an obsolete model. but if i were you id lay hands on a wiring diagram and just start tracing the circuits. thats how I did it!

[@giftcurse6628]

@@TJBRUTALCUSTOMS thanks ive been searching for the correct one as well it seems like most ppl bobber style their 500c but dont give any detail. Almost like gate keeping 🤦🏿‍♂️😂. Ill keep searching.

[@jonvarga5569]

I got the single cable throttle assembly and an planning on doing this mod, but since the right side controls are now gone from the handlebars, how do you go about getting the brake light switch to work? Are you only using the rear brake to illuminate the brake light?

[@TJBRUTALCUSTOMS]

use the rear brake switch. you dont need both. how often are you ONLY using your front brake?

[@jaycezar2981]

What do I connect the headlight wire to after removing from standard housing

[@immelting9834]

Did you ever figure it out ?

[@1049goth0]

@@immelting9834i just got this same issue , any chance you ever figured it out too?

[@badventureszine5376]

Same issue, any answers?

[@bigchungus-oj8zz]

Very straightforward and smooth, dig it. SUB’d. Peace out..:)

[@jeremywebb1561]

I know this is an old video but I had a question. You didnt do anything with thw headlight shutoff wire. So how do you turn off the headlight when you try to start the bike? I am under the impression the headlight draws enough power that the bike may not start if its still on while starting???

[@craigkilling9021]

Currently working on the wiring harness right now and all you need to do is take your black and red wire to one side of an on off switch and then connect your headlight wire to the other side so if your switch is in the off position when you go to crank your bike your light will not come on. you can Trace a green wire from the harness and put your negative from your headlight wire together with the green and that is ground. I highly suggest you upgrade your ground wire that is right above the front ignition coil though.

[@jarnomeekes6756]

My vt 600 also has a red and black which apparently goes to my headlight fuse, whats the best thing i can do to that?

[@dylanvanlandeghem5819]

Nice vid but what with the light beam switch???

[@aaharris47]

This might seem a dumb question but how do determine the type of wiring to use?

[@sleepercore7725]

Any electrical on vehicles I personally think you should go with the same gauge wire that you have snipped

[@sleepercore7725]

And most of it should be a copper wire

[@aaharris47]

Appreciate the response!

[@Mayanhipster.7688]

I followed the steps but I can’t get the headlight to go on, any ideas? Is it that blue wire?

[@1049goth0]

My headlight is also not working now did you figure this out by any chance? The kill switch and start button i wired in work perfect but no headlight

[@Alexandre-zv8gd]

Great video. I'm screwed. Too much for my head.

[@StarxLord30]

I'm trying to do this but I can't figure out which wire goes from the kill switch (toggle) to the starter button (push button) does it matter? Or am I over thinking it?

[@craigkilling9021]

What I did when watching this video was watch how he had the Killswitch positioned and when he said connect this wire to that and that wired to this, that’s what I did. Honestly, I don’t think it matters when it comes to the Killswitch. It’s an on off situation and if you have it flipped around then all you have to do is flip the little indicator plate around so that faces the right way for on/ off

[@lilbroly6669]

Does this not fuck with the Cdi box ?

[@roadkillsf.f.cgarage386]

I need that push button brother

[@eriksurface4714]

So why did u add wires to the previous wires? Can’t u just use the regular wires without adding wires. If its necessary what size wires did you use?

[@TJBRUTALCUSTOMS]

As the title says -to relocate the switches. 👍🍻

[@raimondhalfaker6685]

I relocated on the start and kill switch and have a push to start button. My question is how do I go about tying in remote start? Is it possible?

[@RyMuEntertainment]

The previous owner of my bike has the factory start and run buttons active, but the ignition key mechanism has been replaced by a toggle switch. I want to go back to a keyed system, have that toggle switch (inconspicuous location) operating as kill switch and then run TJ’s button start which is currently onboard just not hooked up. Do I just fish out the wires from the oe button start run them to the toggle switch and then to the push button as TJ suggests here? I’m excited to get this going on my ride. Am I missing anything? Thanks 🤙🏾😎

[@DjEfFeCt708recordings]

Doing this on my 81 cm400 c and the push start is the same colors but what about the wires from the actual kill switch itself? You say in your video the kill switch is with the wires on the push start so I'm kinda confused on what to really do? No I don't want to bypass the kill anymore. Please help

[@josephprestage7110]

Have a 99 Honda Shadow vt600 try to put a starter button on it and I got those three wires but it won't work

[@vp8589]

Any options for cleaning the horn and turn signals ?

[@TJBRUTALCUSTOMS]

Oh yes! U plug them all, then unbolt them and find the nearest trash receptacle and deposit them in a festive but safe manner. Follow with a shot of home brew whiskey and a J and youre on your way to being a total cool guy! Once you throw away the speedometer, you will be unstoppable!

[@vp8589]

lol what about the choke that on that assembly?

[@TJBRUTALCUSTOMS]

Lol - shoptjbc.com/products/shorty-choke-knob-for-vt600-and-vt750

[@georgelucasweiss-tripleB]

Stupid question. What about the other wires left on the plug? Just leave it ? Nothing to do with them anymore?

[@ryanwilliams3369]

Leave them they are for your brake light

[@maykolmontilla519]

@@ryanwilliams3369 do you plug it back in?

[@ryanwilliams3369]

@@maykolmontilla519 yes

[@hollowpoint3188]

Alright im currently building a 2005 hondashadow spirit vt750dcb now let me mention that most of the factory parts were gone. No blinker mainly ive been trying to find a stem to mount some after market blinkers ive bought and i cant find none, do you know a part resolve this problem for me ive been beating my head against the wall for months

[@Brady-ex1sv]

My bike has so many electrical issues I just bought it and it’s a 88’ shadow 600 do you guys sell a wiring harness for it the guy before me hacked it bad and I need to replace it??

[@tiktak605]

Yo TJ do you have a video or diagram for a push start, no kill switch and on off on toggle for headlights? I've followed this video for the push start set up with no killswitch, but I've also incorporated your diagram for on off on toggle switch for headlights but now my headlight aren't working. On my push start ive got ylw/rd on one side then blk/g and blk/w on one side. For my on off on toggle ive got blue plugged in and going to the headlight (and still spliced into high beam indicator), then black/red in the center (goes straight to the fuse box), and then white that goes to the headlight and nothing else. I couldn't find anything in your vids or forums that showed the push start/onoffon/no kill switch set up all in one. Any info would be great, I understand its electrical and you don't know exactly what all ive done to it in order to give me an exact answer, im just curious if youve got a diagram as to how its supposed to be done correctly. Im thinking since stock setup had a blue/white jumped from the toggle to the start button that that would have something to do with it but again I'm not sure. Thanks in advance man

[@tiktak605]

02 vlx 600 cd btw

[@samuelcolvin4427]

I already did this, but want to remove my ignition.. do I need to do ANOTHER toggle switch? Or can I just get rid of the ignition?

[@TJBRUTALCUSTOMS]

Yes, you need to replace the key with a toggle.

[@samuelcolvin4427]

@@TJBRUTALCUSTOMSto confirm.. cause I’m dumb… I’ll then have TWO toggles. One to act as the key. One as the killswitch?

[@TJBRUTALCUSTOMS]

@@samuelcolvin4427 yeah one as the key on/off, one as kill, or you can bypass the kill and just have key on/off and a push to start switch.

[@samuelcolvin4427]

Oo. That is a better option. Thank you🙏 your website is basically my go to for this build. So I’m thrilled you have a KZbin. First build I’m excited. Thanks for the help… I will probably be asking more 😂🙏

[@raf4106]

is it possible to engage the kill switch (badabum) to another of those switches like you have for the light?

[@BradleyMcCartney]

Are the wire colors the same on a VT600

[@daliaperez9721]

If you ground out what would you look at to fix the problem that it doesn't turn on

[@eriksurface4714]

Also what did you do with that headlight wire?

[@TJBRUTALCUSTOMS]

This is how i wire my headlights. d33v4339jhl8k0.cloudfront.net/docs/assets/5a6f7e612c7d3a1eaf1e12ff/images/5af357c22c7d3a3f981f6ca6/file-QtYvE1PNBg.jpg

[@seanahern4864]

@@TJBRUTALCUSTOMSAre you by passing the blu/wh wire and wiring directly with the individual blue and white wires? And is the blue wire spliced into the black/red one? Trying to understand your process on the headlight with your picture and a wiring diagram.

[@mr.noneofyourbusiness3234]

YESSSSSS!!! Thanks bro. Another great vid!!

[@austinmills7397]

What about the other three wires. Where do they go. Or are they absolete

[@Klips360]

I have a Honda shad vlx 600 . If I do this would I have to bypass the clutch switch . I was told I had to .

[@johnbryant3014]

Is that the clip that plugs into the speedometer/miles on a 01 Honda shadow 750

[@grudzien9784]

Hey brother I’m sure u heard this shit too many times but I’m at a loss here. Hope u can help. I’m waiting an 01 vt600, lights come on when I switch to on but the solenoid doesn’t click and I don’t get the bike to turn over. What the hell am I doing wrong. I’ve got everything connected

[@kingz_xzzs8773]

You can do this in every honda bike?

[@lordnelson78]

What about the kick stand switch? How do I eliminate it on my 92 600?

[@deadpanred9933]

lordnelson78 I just ripped mine off and forgot it was there

[@suzzettereno918]

Where did u get the wire u connect to the other wires

[@anygivensunday1678]

TJ I recently replaced my key switch with a toggle and installed a new push button start next to it exact set up as your video, do i need to connect the two or can they remain independently wired, do you need a kill switch wired in for the bike to start? is there an immobilizer i am unaware of? Battery is charged, fuses are good, i have watched all the videos, looked up the wiring diagrams and followed everything 100% and cant get it to start. HELPP!!

[@anygivensunday1678]

Thanks mate ill be sure to go through it all again, it should be so simple hence the frustrations! keep up the good work man! videos and products are awesome have been a massive help to date

[@anygivensunday1678]

@TJBRUTALCUSTOMS i can still wire the kill switch to the push to start button to eliminate the need for an extra toggle switch right? exactaly like you have done in this video?

[@ronharmon5598]

@tjbrutalcustoms I just purchased these push button and toggle switch from your site but it says nothing about if they are water proof or not. Obviously taping up the wires but are the actual buttons and switches waterproof before I mount these lol

[@BackroadBubba2]

Could I wire my gold wing like this?

[@TJBRUTALCUSTOMS]

I'm not sure man, I don't know enough about gold wings to say. Look at the wiring diagram!

[@BackroadBubba2]

@@TJBRUTALCUSTOMS thanks. I mean the concept of moving the switch.

[@TJBRUTALCUSTOMS]

@@BackroadBubba2 again, I don't know enough about the goldwing to say, sorry man

[@Adam1nfamous]

im looking at an 84 honda shadow harness, i have the section on the table that goes from the right grip to the light cluster and its only a ft long, leaving my brake light switch going to the bars and removing the start and killswitch buttons, the colors of those 2 buttons dont match these in the video. my non latching start button has y/r, black, blue/w, black/red, and i have a nonlatching button i want to attack, looking at the button im assuming the black wires are the power and ground because theyre allways attacked and the blue is normally closed because it is attached when unpressed and the yellow and red goes to starter because it is connected when pressed, is that correct? if so is solid black the power in and black/red the ground?

[@Adam1nfamous]

@@TJBRUTALCUSTOMS its only a little different, i pulled it off the bike entirely, tho typing it out helped me understand it a bit more tbh, thanks for the video !

[@biggyles9550]

Is it the same way for the honda vtx 1300c?

[@junaidim3674]

I am relocating start switch and getting rid of kill switch. Installing same switch you have in the video. Little confused about wiring the switch. When i removed factory housing, kill switch had Red and Orange wire and start switch had Blue and Green wire. How do I connect those to new start switch? Please help.

[@junaidim3674]

Sorry Start switch had Blue and Black wire

[@danhoy8356]

Thanks!

[@TJBRUTALCUSTOMS]

You're welcome!

[@danhoy8356]

I bought several pieces off you for my build. Unfortunately, that project stalled for a year.. I’m about to get back on it. Just wiring left!

[@fuserman3457]

damn boii you make this shit easy, once i get these switches in and get my rabbit ears from zombie performance my bike is going to be sexy.. probably will end up keeping it for life

[@gracehutton7999]

Now none of my shit works great

[@sokycraftcompany253]

If wiring up to a kill switch like at the end of this video does it matter which wire the green or gray go to ? Thanks for this video it put hope back into a old build

[@sokycraftcompany253]

And also. On the clip you cut from in the beginning what do you do with the other three wires ? What are they for ?

[@nateklein7342]

no it doesn't matter which side (once wired to the switch) you go from

[@frankiemccabe4602]

Would this be the same for a vt125?

[@gabriel9102BR]

Amazing tutorial!

[@shaneludington66]

Trying to follow but I have 2001 shadow ace 750 cd2 and nothing is the same as u suggest although I did find a "red plug" with a total of 6 wires of which the red yellow and black white are there BUT it has 2 black wires, so I'm stumpeed... ANyone? Thanks in advance... I'm trying to build a bobber and for what it's worth I actually personally bought VTWNs public shell/stock symbol and went public with my company I a reverse merge. Crazy I know but true... look it up! Stock symbol VTWN and TBCo and me Shane Ludington. Never ridden before but love wrenching Ford Bronco stuff and this project is a special sentiment. Any help would be awesome and appeciated!

[@shaneludington66]

And theVTWN shell is for sale again as TBCO failed lol... not really funny BUT you can buy the Public Empty Entity for the bargain price of 100k I paid 200K :( Finishing this bike would be just as well tho, thnx again, happy bobbing everyone.

[@fuserman3457]

oh ad for the butt connectors 22-18 gauge good?

[@summitslumpgod2784]

What’s the specific wire? I need a female end for mine, don’t really know what to look up I’m new to building bikes

[@summitslumpgod2784]

With the green tip, I need the Female end, wires are corroded and nasty solder on them

[@jeffp.5080]

Will this work for an 86 450 rebel?

[@alanmartinez3743]

Do you have a video of relocating the hi and low and turn signals?

[@tylercraig5912]

the high and low beams and be moved to an on off on switch just using the white, blue, and black and red wires which will in turn remove the low beams and create an on and off for the high beams. there is a wiring diagram on his website at support.shoptjbc.com just search wiring. the turn signals can be relocated as well with the grey, light blue, and orange wires. there are three others as well that are running lights for your front signals and I personally didn't use them and eventually ended up taking off my blinkers.

[@Slash69Snake]

Hey TJ! I would like to get in contact with you, have a few questions regarding one or two products of yours. I'm from Romania and I'm building currently my Honda Shadow 600 bobber. Best regards, Csaba! Cheers!

[@Slash69Snake]

@@TJBRUTALCUSTOMS I don't have any order number that is asked in the must fill out contact form, so I can't write a message to you.. :(

[@toolbox7890]

thanks for the vid I want to give my 96 vt1100c a crisp clean look and will be adding this to it is there a way to clean up the motor area of all the trash from the factory and make it still run and be clean as well

[@rickbecker3277]

Cool, i also have a 96 VT1100C and im curious if you were able to do this. So, maybe a vid on your ride, how well it was cleaned up, possible switch places. Inquiring minds would like to know. Hope you were successful.

[@maxostrowski5269]

Hey, did you have the same wires? For mine, I don’t have that black and green. I am getting no spark for my plugs.. I have a blue/white, black/red, yellow/red, and a black/white. How did you wire yours?

[@toolbox7890]

No I sold that bike years ago and got a old harley sporty I am building now

[@tonyayres6877]

is there a video about what to do with the headlight end?

[@guitarguy-kq9qp]

@@TJBRUTALCUSTOMS Any update on that? Would the headlight wire be connected to the starter or the kill switch? Ive eliminated the kill switch so would it be the kill switch wires and the headlight wire attached to one end and the starter to the other?

[@orionzzz1651]

I think this is why my headlight isn’t working now

[@1049goth0]

My headlight is also not working now did you figure this out by any chance? The kill switch and start button i wired in work perfect but no headlight and my front brake won’t activate my brake light, only my rear brake

[@vp8589]

The the blue and white wire feeds the headlight. Splice it into the black and red wire and everything works

[@jozsefabarr254]

What year are yalls bikes? And what red and black do you mean individually red and the other black

[@eco3846]

@@vp8589Thank you for this comment. This solved my headlight issue

[@seanahern4864]

@@vp8589are you splicing it directly into the wire or are you hooking those two to a toggle switch too?

[@FPSWyWy]

How did you rerun the brake light switch ?

[@josephcohen9174]

How to disco net vacuum line on 2002 Honda shadow ace 750

[@ChrisHeathen]

I had the same question and thought the same thing myself. I'm new to the motorcycle thing so another question I have is about replacing the other hand controls and what to do with the clutch diode. Can it be bypassed?

[@pigmasterpoe7321]

Forgive my ignorance I’m extremely new to building bikes but how do you turn off the bike without a kill switch ik it’s probably a dumb ass question 😂

[@TJBRUTALCUSTOMS]

yeah i just run a key and start button.

[@rugerboyks6288]

I’d find a different spot to put the switches so you don’t have to snip the wires each time you want to just pop off your side panel for anything

[@TJBRUTALCUSTOMS]

👌

[@samuelcolvin4427]

I wired mine into the side panel and connected it with connector plugs. Works like a charm is I need to disconnect

[@Mexi89Melt]

So after this your headlight will not work without that blue wire connected to something right?

[@guitarguy-kq9qp]

yeah. i just did it and my headlight won't work now. its too dark out to fix it but I'm almost positive it has to be connected to the starter wire

[@theefantom33]

guitarguy1995 did you figure out how to get your headlight to work?

[@theefantom33]

Great video but I need help! I did exactly what you’ve done here. I didn’t add a kill switch either. I’ve double checked all wiring fuses and all but my bike won’t start when I push the start button? What do I do?

[@jaycee9086]

Check the starter relay

[@masonhendrix6266]

@@jaycee9086 my is doing the same thing

[@masonhendrix6266]

My is doing the same thing

[@austinwaite69]

Did any of you figure out why it’s not starting? My bike cranks like it’s going to start but it never does.

[@garylively412]

I'm trying to wire up a 1981cb650 that I put on a rigid frame starting from scratch wires not even ran to controls on the handle bars I've never wired a motorcycle and have looked at so many diagrams it's not funny is there anyone that could help me out with this.

[@lilbroly6669]

Can I just run the button right of those wires without having to add wire ?

[@theefantom33]

lilbroly 666 did you figure it out?

[@CoryParker-m1j]

Why can't you just wire the Killswitch wires together

[@CoryParker-m1j]

I'm just bypassing the Killswitch no relocating

[@TJBRUTALCUSTOMS]

We are so sorry but besides our KZbin channel and our support page at shoptjbc.com we do not offer any other building or diagnostic advice.

[@alden2679]

Can i send you like $10 for all the help your videos have provided for me lol

[@sleepercore7725]

I'm sure they wouldn't mind

[@andrewortiz687]

sucks that my bike doesnt have any original wiring so its become a bit more difficult

[@aarryn123]

Did exact same as video stated, push the push button I installed and nothing. What now?

[@ILikeCatsMoreThanILikeYou]

Did you figure it out?

[@aaharris47]

So the 07 spirit has 4 wires running to the starter. I’m not sure what to do.

[@aaharris47]

Awesome! Thank you!

[@aaharris47]

TJBRUTALCUSTOMS you have a service manual for the 2010-2013 VT750c2. Does this also work for the 2007 VT750c2?

[@kathrynkemp7629]

Color wiring diagrams for Suzuki bandit 1250

[@gabriel9102BR]

Those side covers ( battery ), you sell then?

[@gabriel9102BR]

TJBRUTALCUSTOMS you make those? They are perfect man!

[@Williamcole10]

Anybody wish that his switch was more it's like if it doesn't look like a switch that maybe it looks like a part of the bike you just twist and that's the ignition I've been looking everywhere for something like that I really want to do like hidden in plain sight sight deal

[@kylemullin2880]

Please.do a.video with the kill switch and button

[@mariocevallos8134]

What gauge wires are they?

[@TacticalApu]

16 or 18

[@gabrielwiyninger568]

Help please no spark

[@mattduncan5500]

2 questions . 1. why did you abandon the headlight cutoff . 2. you also abandon the kill switch , what is the advantage of having kill switches? i mean, i hardly turn mine off and obvs, if cant be that important if you ignored it just here in your build

[@TacticalApu]

The kill switch is just to basically act as a key on the handlebar so you can turn the bike off without turning the key off

[@davidmugsyclewell8157]

Would that and you single throttle cable work on a Rebel 250?

[@davidmugsyclewell8157]

TJBRUTALCUSTOMS oh Jeeze. Yeah proof read David lol. The kill switch. Thanks for replying.

[@davidmugsyclewell8157]

Before I order I'm assuming for 7/8 bar fit? Oh and nice Crimson Ghost tattoo lol. I'm a big Misfits fan

[@Superthecod]

David Mugsy Clewell 1”

[@alittletoofrank]

"Black Bikes Matter" hahaha. Great video man.

[@grudzien9784]

*wiring

[@late2thegatefpvdfreeman319]

Watching cuz my kill switch is not functioning and bike won't start