How To Remove A BMX 1 Piece Crank, Bearings, and Cups | Step by Step

  Рет қаралды 86,707

The Basement Bike Shop

The Basement Bike Shop

5 жыл бұрын

This video will show you how I remove a one piece crank, completely. If you are switching over to a 2 piece or 3 piece crank, make sure you get the right size American bottom bracket to fit your spindle size.
If you need to purchase spanner wrenches for the crank, I recommend-
amzn.to/3Jq97Wm
amzn.to/42gINXn
amzn.to/40gA45Y
If you need to purchase an American Bottom Bracket set, I recommend- amzn.to/3mYBVhk
If you are switching to a 3 piece, you will need a bottom bracket like this in your spindle size- (usually 19mm, 22mm, or 24mm)- amzn.to/3bBfWC1
If you want to know more about installing a 3 piece crank, check out these video:
Installing a BMX Bottom Bracket With a Bench Vise- • Installing a BMX Mid B...
Installing a BMX 2-Piece Crank- • Installing BSD Substan...
Installing a BMX 3-Piece Crank- • Removing and Installin...
My next video will be on the complete installation of a 1 piece crank
If you have questions or requests for future videos, comment below or message me at rob@basementbikeshop.com.
The Basement Bike Shop KZbin Channel - kzbin.info/door/-Aw....
My mission is to keep more bicycle riders in the sport.
Whether you can't afford to take it to a shop,
you don't have a way to transport it to the shop,
you don't have time to take it in for repairs,
or you just want to learn to fix, repair, and upgrade your own bike,
I will help to keep your bike running smooth and you riding longer.

Пікірлер: 74
@alanlhz2118
@alanlhz2118 2 жыл бұрын
Man you dont know how much you helped me, ive been searching for how to remove this kind of crank for 2 whole days, THANK YOU
@thebasementbikeshop2336
@thebasementbikeshop2336 Жыл бұрын
You're Welcome! Glad I could help
@briangurnett
@briangurnett 24 күн бұрын
Same! You helped me a ton, dude.
@graemepalmer6991
@graemepalmer6991 4 жыл бұрын
Great video, very helpful. Thanks.
@DryBowser4523
@DryBowser4523 3 жыл бұрын
Thank You So Much! Going To Switch To 3 Piece Cranks With A Smaller Front Cog :)
@mountain5930
@mountain5930 2 жыл бұрын
Hey, just wondering. I have a 20” frame what 3 peice cranks and BB would you recommend?
@boydluapula2156
@boydluapula2156 2 жыл бұрын
very good video exactly what I was looking for
@gregharper5920
@gregharper5920 Жыл бұрын
Thanks, man. Great instructions!
@JohnDoe-nf2ok
@JohnDoe-nf2ok 2 ай бұрын
Best concise video on the topic.
@TheBBCking
@TheBBCking 11 ай бұрын
This video was very helpful and well explained
@LawnDad
@LawnDad 3 жыл бұрын
Great video!
@peterrathbone179
@peterrathbone179 4 жыл бұрын
Great informative video 👍👍
@hunterkennedy7915
@hunterkennedy7915 2 жыл бұрын
So helpful i was turning it the other way
@johnnyskuja
@johnnyskuja 4 жыл бұрын
thanks. very clear
@JR-yr8xm
@JR-yr8xm 5 жыл бұрын
thumbs up for showing a gt dyno compe
@smetanka1996
@smetanka1996 3 жыл бұрын
Thank you!
@justinleekeirulf7483
@justinleekeirulf7483 3 жыл бұрын
Very helpful
@nomoniker7917
@nomoniker7917 2 ай бұрын
Perfectly explained video...thats more rare on KZbin than you think. THANK YOU!
@danvanhoose6783
@danvanhoose6783 2 ай бұрын
My old huffy savannah needs this done for bearing service.thanks
@Bdamazyn
@Bdamazyn 2 жыл бұрын
Dude! You saved me😁👍
@BigSkyBiking
@BigSkyBiking 2 жыл бұрын
Thank you so much
@huntersemple7760
@huntersemple7760 2 жыл бұрын
THANK YOU
@lazybear4
@lazybear4 2 жыл бұрын
Thankyou soo much ❤
@chum-chum2701
@chum-chum2701 Жыл бұрын
Thank you
@dman4249
@dman4249 3 жыл бұрын
Now that I got this out, any 3 piece recommendations that are ACTUALLY in stock?
@roncooke2188
@roncooke2188 2 жыл бұрын
thanks great video interesting
@vanrippon6043
@vanrippon6043 2 жыл бұрын
Do u have to take out those inner circles with the hammer and metal rod even if u are not changing the crank and just changing the sprocket ?
@georgemilne5562
@georgemilne5562 11 ай бұрын
Grateful for you
@Trypno
@Trypno Минут бұрын
I have been wondering how the hell to remove the crank on my electra rat rod since I got it, all I could ever find were talks about square tapers and three piece cranks, and didn’t know I had a bmx style bracket
@Khanage911
@Khanage911 3 жыл бұрын
Thanks
@Altie8
@Altie8 2 ай бұрын
thanks
@crown6468
@crown6468 3 жыл бұрын
Can I replace unsealed bearings with sealed ones? I have a one piece crank
@fransuke12
@fransuke12 Жыл бұрын
Question. What size of crank bearing you used?
@byronoreilly2385
@byronoreilly2385 Жыл бұрын
Thank you lifesaver😂
@thebasementbikeshop2336
@thebasementbikeshop2336 Жыл бұрын
You're Welcome! Glad I could help
@Nofear9066
@Nofear9066 19 күн бұрын
? i have a 25 tooth crank one piece can i put a 32 tooth crank on it without replacing bearings can i use the old ones?
@diecastgoblin
@diecastgoblin Жыл бұрын
Why would the bearing hold the sprocket in? It normally falls out if it's a bearing like this one most time.
@ZombieJuicer17
@ZombieJuicer17 2 ай бұрын
I'm trying to find what to do if the cups are stuck? Which is where I find myself... the one thing holding up my restoration.
@djdlo
@djdlo 3 жыл бұрын
Great video. What size c wrench is that?
@lannlann
@lannlann Жыл бұрын
It was a 19mm-51mm hook wrench. The smallest wrench. You can see the size on the wrench handle
@JonathanSterlingUSA
@JonathanSterlingUSA 3 жыл бұрын
You just tap out the cups. That's what I needed to know. Need to install a square-taper bottom bracket adapter.
@thebasementbikeshop2336
@thebasementbikeshop2336 3 жыл бұрын
Yes sir
@joeylamp_holder2013
@joeylamp_holder2013 3 жыл бұрын
Are crank sizes universal across all bmxs, for install?
@blvck______
@blvck______ 3 жыл бұрын
Nooo all different
@mrdubachery
@mrdubachery 4 жыл бұрын
What if the cups have been in there since the factory in 97? They definitely aren't moving at all for me. Thanks!
@thebasementbikeshop2336
@thebasementbikeshop2336 4 жыл бұрын
I would spray a little pb blaster in the areas. Let it soak in for a couple hours. Spray it again. Let it soak again. Then Try it. I hope this helps.
@mrdubachery
@mrdubachery 4 жыл бұрын
@@thebasementbikeshop2336 Much appreciated. Is that a 97 VFR? I've got the same bike :)
@fkw.cheetah9429
@fkw.cheetah9429 Жыл бұрын
What did you take the jamnut out with
@tylerthebeast
@tylerthebeast Жыл бұрын
I want to know too
@ll_oppz_ll3411
@ll_oppz_ll3411 4 жыл бұрын
What can we use if we don’t have the right tools?
@thebasementbikeshop2336
@thebasementbikeshop2336 4 жыл бұрын
Thinking about this question gives me flashbacks of cutting my knuckles open on the sprocket as i tried to get my crank and sprocket off with a flat head screwdriver and a hammer. I've done it but i don't have good luck without the right spanner wrenches.
@TherealGM4NN
@TherealGM4NN 3 жыл бұрын
What tool too use for that race nut
@lannlann
@lannlann Жыл бұрын
It was a 19mm-51mm hook wrench. The smallest wrench. You can see the size on the wrench handle
@tonelar415
@tonelar415 Жыл бұрын
what size wrench - outer jam nut?
@thebasementbikeshop2336
@thebasementbikeshop2336 Жыл бұрын
This one is 32mm but not all of them are. Hope that helps
@dogedrip4215
@dogedrip4215 2 жыл бұрын
Can I just remove the chain instead of loosen the chain ?
@thebasementbikeshop2336
@thebasementbikeshop2336 2 жыл бұрын
Yes
@brookeowenby8388
@brookeowenby8388 3 жыл бұрын
Where did you purchase your spanner wrench?
@lannlann
@lannlann Жыл бұрын
It was a 19mm-51mm hook wrench. The smallest wrench. You can see the size on the wrench handle
@lannlann
@lannlann Жыл бұрын
Search eBay
@zanderbalbin8491
@zanderbalbin8491 17 күн бұрын
1:32 what tools is thos and what size i need help
@barelyworks
@barelyworks 12 күн бұрын
I got mine off using an adjustable wrench, my question is what is that tool he uses to take that weird bolt off the sprocket...
@declancollier5514
@declancollier5514 4 жыл бұрын
Hi where can I buy that spammer to remove the sprocket
@thebasementbikeshop2336
@thebasementbikeshop2336 4 жыл бұрын
I bought my spanner wrench off amazon
@jonathan-jo6pn
@jonathan-jo6pn 4 жыл бұрын
@@thebasementbikeshop2336 what was the size of the flat wrench for the locknut?
@troymouer6037
@troymouer6037 4 жыл бұрын
BruhMomentum Id like to know the same thing.
@kitb4sh
@kitb4sh 2 жыл бұрын
Hang on mine has another nut connected to the bit after the first nut ? What
@laluna5192
@laluna5192 Жыл бұрын
you in NJ?
@thebasementbikeshop2336
@thebasementbikeshop2336 Жыл бұрын
No sorry. Wisconsin.
@BMXLIFE1988
@BMXLIFE1988 Жыл бұрын
What size is the jam nut?!very irritating how you left that detail out otherwise great video
@thebasementbikeshop2336
@thebasementbikeshop2336 Жыл бұрын
Sorry about that. This outter jam nut is a 32mm but not all of them are the same size. I hope that helps
@loou26
@loou26 3 жыл бұрын
Thank you Sir. I am rebuilding a 91 Haro and have never taken apart a bike, a few of your videos helped me complete the task!
@b.e.2754
@b.e.2754 4 жыл бұрын
I got the crank and shit out but I been pounding on the fucking 2 last couplings for 3 hours. I'm fucking drunk i dont got time for this.
How To Install A BMX 1 Piece Crank, Bearings, and Cups | Step by Step
8:37
The Basement Bike Shop
Рет қаралды 55 М.
I’m just a kid 🥹🥰 LeoNata family #shorts
00:12
LeoNata Family
Рет қаралды 18 МЛН
Became invisible for one day!  #funny #wednesday #memes
00:25
Watch Me
Рет қаралды 8 МЛН
BMX 3 Piece Crank Set & Bearing Installation (2 Techniques)
8:16
First Components
Рет қаралды 85 М.
Convert One Piece Crank To Three Piece Crankset/Bottom Bracket
12:45
RJ The Bike Guy
Рет қаралды 259 М.
How to restore the chrome on a Haro BMX Bike
29:41
Chrome and Car Restoration
Рет қаралды 36 М.
Gearless Magnet Bike
17:57
Tom Stanton
Рет қаралды 6 МЛН
BMX 1 Piece to 3 Piece Crank Conversion | Step by Step
17:25
The Basement Bike Shop
Рет қаралды 10 М.
How To Remove And Install A BMX Bottom Bracket
10:54
Southern Bmx Films
Рет қаралды 248 М.
LEARN HOW TO WHEELIE ANY BIKE NOW!!
9:36
Porter MTB
Рет қаралды 1,6 МЛН
Are Chainless String Drive Bicycles a Genius or Terrible Idea?
12:50
CYCLINGABOUT
Рет қаралды 6 МЛН
BMX Unsealed 3-Piece Crank Installation and Removal
13:16
The Basement Bike Shop
Рет қаралды 12 М.
Berbagi lolipop ke orang buntung‼️
0:14
Abil Fatan Key
Рет қаралды 6 МЛН
🤪#LondonBridges catching Mom! #kidssong #funny
0:17
J House jr.
Рет қаралды 139 МЛН
деревня.лето.юность.эх
1:01
Шунька
Рет қаралды 15 МЛН
ЧАПИТОСЯЯЯЯ😜😜😜
0:14
Chapitosiki
Рет қаралды 38 МЛН
Think of stray animals 🙏😥
0:37
Ben Meryem
Рет қаралды 58 МЛН