You're officially voted King of Tutorials!! Great video! Highly detailed, step by step instruction was top notch! Thank you! 🔧⚙️🚴🏼♂️👍🏼
@hoohoohoblin3 жыл бұрын
You’re welcome!
@POFlee7 жыл бұрын
Best bottom bracket conversion video on KZbin. Seriously. No1 else went thru the process as good as that.
@hoohoohoblin7 жыл бұрын
+Albeezy6 Thanks!
@Marty_Mc.Hockey8 жыл бұрын
honestly most informative video out there.
@hoohoohoblin8 жыл бұрын
+Martin Binkier Thanks.
@causeeffect587 жыл бұрын
hoohoohoblin can you stage up to a 48 spline with the bearings n all? N is this 155 or 175mm?
@zakiakhalid84423 жыл бұрын
So true
@titodiaz4783 жыл бұрын
Almost 8 years and still the best tutorial out here.👍🏼👍🏼 Did the kid figured out the equation already?😂
@hoohoohoblin3 жыл бұрын
Thanks. Yes. He is majoring in math in computer science in college right now.
@PooRollAdventures5 жыл бұрын
8:25 “We actually could not figure out the equational of which way.. how.. we couldn’t take it off..”😂😂😂😂😂😂
@horaciocanchola56304 жыл бұрын
“hey I have a pedal video too”😂😂😂
@imnickMF8 жыл бұрын
"Shut up jimmy!" LMAO
@lorenzovaros58258 жыл бұрын
Turbocharged RC me too
@martinmartinus57764 жыл бұрын
5.38
@GRIMMGODD7 жыл бұрын
This video is a life saver ive been searching the galaxy for sealed bottom brackets and all i need is 19 mm thank you so much man
@hoohoohoblin7 жыл бұрын
+Christopher Walker You're welcome.
@icyboi83356 жыл бұрын
“Shut up jimmy” Ion know why I’m watching this I already know how to work on bikes😂
@hectoralexander9855 жыл бұрын
Hey...awesome video and very informative. I have always used 1 piece cranks and I am going to venture into the 3 piece and you made it too easy that I cannot mess it up.
@hoohoohoblin5 жыл бұрын
I’m glad I could help. Good luck.
@finnbyrne_photo8 жыл бұрын
om thank you for restoring my sanity. i had a whole load of problems when buying a new axle for my 19mm Spanish bottom bracket and now after watching this i can sleep at night :D
@hoohoohoblin8 жыл бұрын
+AFOMEDIA You're welcome.
@twiztidsidfreak134 жыл бұрын
I can tell that you took that original 3 piece off, then installed the 1 piece just to show how to remove it then installed a replacement 3 piece. That's alot of extra work and you deserve credit. I made a video on how to install a new 1 piece 10 years ago when there were not any videos on that and I'm glad to see there are more videos now. I got to say, WOW on the 500K views, in 10 years my video has gotten 53K. Then again I don't have 97K subs LOL No but really, GREAT video! I love how you showed how easy it is to make a bearing press to install cups the best way. I did use a hammer in my video but I did show how to do it carefully. Again, great video yo!
@hoohoohoblin4 жыл бұрын
Thanks. I appreciate it. I had no idea that many people would end up watching this video, but I’m glad I can help.
@VaderIsKing10 жыл бұрын
Exact crankset I am installing right now! Those cups I actually thought were part of frame and kept me confused for weeks! Very helpful vid! Thanks!
@hoohoohoblin10 жыл бұрын
You're welcome. I thought those were part of the frame, or welded or pressed in place when I first did this as well. I wish bike parts came with instructions. I'm glad I could help.
@hectoralexander9854 жыл бұрын
First of all I would like to tell you that this video helped me out tremendously. It still was a ball buster but without this video I would have been twisting in the wind. So, again I thank you 💯
@hoohoohoblin4 жыл бұрын
You’re welcome.
@mdoyle18010 жыл бұрын
I'm building a bike from the frame out and had no clue what I was doing til I watched your video. Thanks so much for helping me figure out that my frame had an American bb, it was the missing link. Keep up the great work.
@hoohoohoblin10 жыл бұрын
You're welcome. I was surprised to find out that BMX bike parts don't come with instructions.
@rileyhayden998410 жыл бұрын
I this one of the better videos on you tube i think ive watched mainly cause when you watch a video explaining how to do something they treat you like your stupid but in this video is was good wasn't annoying and it helped inform me what i need to do with my bike
@hoohoohoblin10 жыл бұрын
Riley Hayden Thanks!
@deadgoon746 жыл бұрын
*you're.
@MrSkaterdrew11 жыл бұрын
Awesome vid. My euro bearings broke and long term its cheaper to just get a new frame and bracket. Now i can use my old diamondback and turn it into something decent. Thanks
@minxlabrada8 жыл бұрын
Thanks for this. Ordering an XL Floval Flyer and Redline Flight cranks. Have never installed 3 piece cranks before now, so I wanted a quick lesson. Seems easy enough. Your kids are funny!
@hoohoohoblin8 жыл бұрын
+Telling Fat to Fork Itself You're welcome. I'm glad I could help.
@lillste10 жыл бұрын
Many thanks guys,took the laptop out to the bike , had to pause you guys a few times and all is well ,my lads bike is up and running,many thanks,keep up the good work...Steve
@hoohoohoblin10 жыл бұрын
You're welcome. I'm glad I could help.
@jaycontreras72983 жыл бұрын
I've been looking through mad videos and finally found the most useful detail video. Thank you for this clip
@raytone991910 жыл бұрын
Been wanting to replace my old haro cranks with new ones and this helped sooooo much! Thank you
@hoohoohoblin10 жыл бұрын
You're welcome.
@jwlove7372 жыл бұрын
Hey p0 🐞
@miguelalexandre1211 жыл бұрын
OMG my saver!!!!! i was tired to search for videos and do not find anythingTHANK YOU!!!!!!!!!!!!!!!!!!
@jessiedamon676 Жыл бұрын
best video on the internet!! explains every detail
@hoohoohoblin Жыл бұрын
Thanks
@Yanai_H6 жыл бұрын
Thanks man I only needed the explanation of how to remove the one-piece cranks because I'm making a trampoline bike. This video was helpful
@hoohoohoblin6 жыл бұрын
You’re welcome
@ortizc198910 жыл бұрын
This vid is very helpful. I have a newer kink curb with a unsealed American bottom bracket. The look of a sealed bb is awsome. Looking to get rid of the big nut and replace with the cone washers. So much cleaner looking.
@hoohoohoblin10 жыл бұрын
It's an easy job to do, and the sealed unit works great, without ever needing adjustment.
@cityslacker62218 жыл бұрын
excellent job with the bolt and washers. more folks need to learn this method; its stronger more efficient and more controlled.
@hoohoohoblin8 жыл бұрын
+Ben D Thanks.
@MorganOliff9 жыл бұрын
I believe the sleeve in the middle is more than just a dirt cove, it also provides a stop for the inner bearing races, so that when the crank bolts are torqued you don't put a side load against the bearings. Thanks for a nice crisp How-To. also "shut up Jimmy " has been added to the things I yell at the shop. haha.
@hoohoohoblin9 жыл бұрын
Thanks. You're right about the sleeve. Jimmy hasn't shut up yet!
@mapples58716 жыл бұрын
Morgan Oliff )
@joedebono40123 жыл бұрын
Best video of replacing and Old school crank set up and putting in a new school crank set up great video keep up the good work awesome Great help
@hoohoohoblin3 жыл бұрын
Thanks
@dumbr20986 жыл бұрын
This is so straight to the point, I will definitely do this when I got my mtb, cause my crank broke and IDK what to do with it but I don't have money to replace it rn cause I'm saving up for my mtb, thanks for the video!
@gameisgame30003 жыл бұрын
Man I’ve been looking for this exact swap and finally found it, thank you!!!
@hoohoohoblin3 жыл бұрын
You’re welcome
@adamsifford62282 жыл бұрын
Me to most companies can't tell you sizes.
@adamsifford44487 жыл бұрын
Best video on how to do sealed bearing and 3 pc crank.
@hoohoohoblin7 жыл бұрын
Thanks
@luckysomvilaysack905510 жыл бұрын
I found the Sunday saker but it says it's a mid bb so we're did you find yours
@thelzmovement64809 жыл бұрын
@5:36 shut up Jimmy!
@vietcongrapes61304 жыл бұрын
Thanks 5yr old comment
@thomaskan28528 жыл бұрын
just finished. your video was very helpful.
@glafkosobion90856 жыл бұрын
I had hard time to fit the sealed bearings bottom bracket cups into my 88 Haro Master bmx. I had to use a hammer and tap them really hard to get them in. I am sure it shouldnt be that hard to install them. I believe the problem was the sealed bottom bracket kit I bought, cups were bit bigger and needed to sand them down a bit. Worth spending a few $$ more to get a descent brand. Great video, whole procedure looks very easy to do, while I spend more than an hour to do the job.. I will get that DIY tool as well. :)
@hoohoohoblin6 жыл бұрын
Thanks. I’m glad I could help.
@sipballinjay62114 жыл бұрын
Thank you for helping me in 2020😁
@hoohoohoblin4 жыл бұрын
You’re welcome
@Bobbybbops7 жыл бұрын
Any homemade tool to pop out the cups EVENLY, so powder coat doesn't get chipped? Park tool BBT90 on a budget?
@hoohoohoblin7 жыл бұрын
Not sure how would be the best way to do that. Maybe put a flat short piece of wood through the hole, then turn it sideways inside against the edges, and pound it out with a stick or socket extension.
@FunkyWalker3k2 жыл бұрын
The j-hop onto the box made it worth the watch..
@mred933510 жыл бұрын
6 thumbs down?!? a**holes, GREAT WORK HOOHOOHOBLIN. love the vids im subscribed!
@hoohoohoblin10 жыл бұрын
Thanks! No matter what you do in the world, there are at least 6 people out there who will hate it.
@typhoon14932 жыл бұрын
time to upgrade my mid school 1 piece gt interceptor to a 3 piece. vid was on point thanks
@jeffmorgan19104 жыл бұрын
Awesome. Straight to the point and well done! Thanks
@hoohoohoblin4 жыл бұрын
Thanks
@sirbrad47 жыл бұрын
What MM size is the allen wrench for the end bolt? I have a 6 but is too small. Must be a 7 or 8.
@hoohoohoblin7 жыл бұрын
+sirbrad4 we made this video along time ago, and we don’t have the bike anymore, but I think it is an 8 mm.
@giggin76934 жыл бұрын
SHUT UP JIMMY😂😂💀broo best part in the video‼️💯💀😂😂
@hoohoohoblin4 жыл бұрын
Haha! Thanks! I’ll tell Jimmy.
@nikolasiwankiw4337 жыл бұрын
I am trying to change my bearings on my Sunday 2018 blueprint. It has the same cup things in the B.B. do I need this special American bearing or am I good using a 19 mm bearing or 22
@hoohoohoblin7 жыл бұрын
+Nikolas Iwankiw Take a look at this website. It will show the different sizes of bottom brackets, so you can see which one you need. Most likely you need an American bottom bracket conversion kit. www.danscomp.com/tech-help/types-of-bottom-brackets/
@jonkennedy86636 жыл бұрын
The Sunday blueprint comes with seal bb bearings
@terismylos95925 жыл бұрын
Thanks man that really helped me ... You are awesome ... Keep up the good work.
@hoohoohoblin5 жыл бұрын
You’re welcome.
@dylannolan69408 жыл бұрын
i have a unsealed three piece crank set but i don't think i have that washer the goes on the sprocket do i need that to make my bottom bracket sealed? or does the washer that is on my set up now work?
@skrtskrt34298 жыл бұрын
Dylan Nolan that was just a spacer you don't really need it
@broughttoideas7 жыл бұрын
Dylan Nolan it goes in the sprocket making the inner diameter smaller if not there the sprocket would flop up down as you pedal
@myvicariouslife40124 жыл бұрын
Thanks! Will run to HD and buy the bolt and washers was not sure how to install my new bb cups. Will also be using the bolt for headset installation as well.
@hoohoohoblin4 жыл бұрын
You’re welcome
@iambilly6108 жыл бұрын
My first bmx bike was American unsealed bb. Over and over the bearings would fall apart and usually end in the cranks locking up and tossing me over the bars. Finally i wised up and bought a bike with mid sealed. I don't know why i never got this kit. It would have saved me some headaches.
@hoohoohoblin8 жыл бұрын
+Billy Celli I had the same troubles with bottom brackets, and I was kind of surprised to find that someone actually made a conversion kit.
@willienillie63373 жыл бұрын
thanks for the video. I’m rebuilding and old miraaco bmx and needed the help and the parts. My bike have a three piece crank set, I just need the new seal bearing kit. Thanks again.
@hoohoohoblin3 жыл бұрын
You’re welcome
@marclarson56225 жыл бұрын
Just wanted to say THANK YOU. THis is spot on.
@hoohoohoblin5 жыл бұрын
You’re welcome.
@StuartOnWheels3 жыл бұрын
Thought I had to get a screwdriver in there to get the cranks off! But forgot to take the peddle off first 😂😂
@DaCostaGuitars9 жыл бұрын
I've found an old Bmx bike (store bought) in the trash this past summer & the 1 piece crank was garbage along with the chain & such. I've been dabbling in thought of getting a 3 piece crank because it's better & durable. Here's my question, is it worth my money to get a 3 piece crank system on a bike i found in the trash, or should i just go install a 1 piece crank & ride it like that. I'm a fan of BMX, & i used to do some tricks when i was a kid, but i haven't done that in years since i my bmx got stolen. thanks for your advice, & i enjoy your bmx videos & how to's :)
@hoohoohoblin9 жыл бұрын
+Sasha DC It depends on what parts you have. A bottom bracket kit is around $20, and a crank set with a sprocket would be close to $100. A good BMX bike sells for about $300, so you have to figure out what you want and what you are willing to spend.
@DaCostaGuitars9 жыл бұрын
Appreciate it! I've decided to get a 3 piece crank system for the long run. But thank you
@oswamaniakooo5 жыл бұрын
Excellent video! How long did you use it? Did it fail sometime?
@hoohoohoblin4 жыл бұрын
It worked until my son got tired of the bike and wanted to buy a stronger lighter frame. I’m sure the bearings are still fine right now.
@j.r.smooth29246 жыл бұрын
Hey guys thank you for teaching and showimg me how to do that thank you !😊
@hoohoohoblin6 жыл бұрын
You’re welcome. Thanks for watching!
@itzzgraham9 жыл бұрын
Thanks for the video bro but I have one question why would you need a smaller chain?
@hoohoohoblin9 жыл бұрын
If the new parts have fewer teeth on the sprockets you need to shorten the chain to fit.
@itzzgraham9 жыл бұрын
Oh okay but if your going to have the same sprocket you don't need to worry about that?
@itzzgraham9 жыл бұрын
Okay so I'm looking for a 3 price crank rn and I can't find any good deals how much money do you recommend spending?
@brandenharris87889 жыл бұрын
+Graham S (GangsterGamer) dans comp is a good place to look or get on amazon
@nikolasiwankiw4337 жыл бұрын
Did the cranks come with bearings?
@cameronayala33310 жыл бұрын
Thank u so much! because I build bikes and had no idea how to get that on and I have the Same crankset.
@hoohoohoblin10 жыл бұрын
You're welcome. I am surprised that bike parts don't usually come with any instructions at all.
@cameronayala33310 жыл бұрын
Ya me to
@cameronayala33310 жыл бұрын
But again thank u so much
@therandomplaya59058 жыл бұрын
Your BMX videos help me alot thank you so much! :)
@hoohoohoblin8 жыл бұрын
You're welcome.
@silk91910 жыл бұрын
Just got some new pedals and finding out that my old royce Union has a 1/2" pedal thread and this new ones a 9/16th, are there any 1 piece that have that thread that you know of or do I now need to get the kit to apply the pedals?
@hoohoohoblin10 жыл бұрын
I think you'll just have to buy the right size pedals. I've made this mistake before as well, thinking all pedals are the same and then getting home to realize they won't fit. Most one piece cranks have 1/2" pedals.
@silk91910 жыл бұрын
Yes I was told all 1 piece are a half and 3 piece is 9/16th
@ItsJustChase11 жыл бұрын
I checked the website out, Thanks for the help man. You seem like an awesome dad! wish mine was like you haha.
@jacobvickery815410 жыл бұрын
Do a day at the skate park video
@hoohoohoblin10 жыл бұрын
That's a good idea. The kids haven't been to the skate park since we built a half pipe in the back yard. We should go back there and shoot some video now that they have some skills.
@drewmartinez11206 жыл бұрын
"SHUT UP JIMMY!!!" 😂😂😂😂😂
@Markekezz3 жыл бұрын
Ima save this video so informative on how to do this
@tomodaniels72083 жыл бұрын
That is right on!! I got a YST coming. & I wlll be heading to Lowes or Home Depot soon!! Thanks Very mucn!!
@hoohoohoblin3 жыл бұрын
You’re welcome
@matthewabt25458 жыл бұрын
I have an old diamondback bmx bike from like 10 years ago , it has lots of upgrades such as tires , hubs ,bearings , chain , pedals and stem , it also has a 1 piece crank with unsealed bearings. Would it be a good idea to do this or just keep running the stock crank
@hoohoohoblin8 жыл бұрын
Not sure. It may be worth more money as a collector's item with the stock crankset. If it works fine, I'd leave it alone.
@atm31ac215 жыл бұрын
Seriously a perfect video!
@hoohoohoblin5 жыл бұрын
Thanks
@Koyadon Жыл бұрын
I need an answer, if your frame is american bb should i use also a american bb?
@Mr.Mugello10 жыл бұрын
What size is your spindle, or any spindle for American bb ? because I bought bb but didn't know I needed a need spindle because the one im replacing has threads and wont fit in the tube.
@hoohoohoblin10 жыл бұрын
The one we installed is 19 mm. If you already have the bearings, you can measure the diameter to find out what size you need.
@Mr.Mugello10 жыл бұрын
***** okay thanks
@kylesloft33109 жыл бұрын
What is a USA loose ball is that mid or American
@gotworc8 жыл бұрын
I think it's American
@OpAfAnx4 жыл бұрын
So any 19 mm conversation kit will work with any American style bottom bracket?
@hoohoohoblin3 жыл бұрын
I think so
@trevors65188 жыл бұрын
what is the crank called? sunday crank or somthing?
@d3cal6178 жыл бұрын
They're Sunday saker cranks
@larrysparks38097 жыл бұрын
Trevor S wood turning
@larrysparks38097 жыл бұрын
Trevor S wood turning
@Soundafek7 жыл бұрын
After you removed that one piece crank how did you determine the length of the spindle to use?
@hoohoohoblin7 жыл бұрын
I think they are all a standard length. The diameters sometimes vary. This one is 19 mm.
@Soundafek7 жыл бұрын
***** Thanks..
@sx84446 жыл бұрын
i know this is old and probably wont get a response but ill try. i have a Sunday 2019 blueprint complete bmx and it has 8 spline 3 piece cranks but an unsealed spindle and crankset i already know that i need to get sealed spindle when i get sealed bearing but will i need to upgrade my crank or should they work with an 8 spline spindle?
@hoohoohoblin6 жыл бұрын
I think you can get an eight spline spindle for it. You’d have to check with the bike shop to make sure, but because it is a brand new bike, they probably use the same cranks on their sealed bearing versions.
@sx84446 жыл бұрын
hoohoohoblin thanks i just asked my bike shop if they would work and they said yeah they would, nice to know i dont need new cranks cause my sunday cranks are pretty good cause there 3peice 170mm and full chromo
@eltoro7475 жыл бұрын
Cool vid! I have a question. Can these crankarms be used with a chainring used on a regular one piece crank? And what about an offset chainring? I am asking because I am considering upgrading the drivetrain on my Felt cruiser. :)
@hoohoohoblin5 жыл бұрын
You might be able to drill holes in the chain ring if you could get it off the old crank. But it would be better to just buy a new chain ring with the new cranks. Sometimes it just makes more sense to buy a whole new bike, as these parts can get expensive.
@eltoro7475 жыл бұрын
@@hoohoohoblin I guess I wasn't quite clear. My Felt cruiser (tank frame) has originally one piece crank. It also has offset rear sprocket and an offset chainring, because I run a 3" wide tire. So I want to know if I can still use the offset chainring if I switch to 3 piece cranks.
@jeljas12310 жыл бұрын
do cranks with pins instead of bolts work aswell? (so you dont have to attach the sprocket to the crank)
@hoohoohoblin10 жыл бұрын
They work, but a bolt is more secure.
@jeljas12310 жыл бұрын
allright, thanks for your advice!
@causeeffect587 жыл бұрын
Are these 175 or 155? And if you wanted to change from an 8 spline to 48 can you still use the gear? Like bearings, housing cups n what not?
@hoohoohoblin7 жыл бұрын
They are 175 mm cranks. You can put a different sized sprocket on it if you want to.
@causeeffect587 жыл бұрын
hoohoohoblin. Went with a Salt + 48 spline.. Good vid man thanks.
@itswhatisplayedth214210 жыл бұрын
Does the sprocket come with the crank set or do u HV to buy one separate
@hoohoohoblin10 жыл бұрын
You have to buy the sprocket separately.
@itswhatisplayedth214210 жыл бұрын
Where do u suggest I get one
@patricianolan7658 жыл бұрын
what was your bottom bracket size? i have a unsealed american bottom bracket and was wondering what size spindle and bearings and cranks will i need? to convert to a sealed bottom bracket
@hoohoohoblin8 жыл бұрын
+Patricia Nolan Check the video description. I put the part numbers in there.
@chandlerharrison5398 жыл бұрын
I'm thinking of doing this may I please know about how much it costs
@hoohoohoblin8 жыл бұрын
+Chandler Harrison Check the video description for part names and brands. Bottom bracket is around $20 and cranks are around $70 and a sprocket is $25.
@billieyklepto751410 жыл бұрын
i recently switched from the old school ball bearings and ordered a redline american 22mm bb, the center tube will slide over the spindle but, the spindle is threaded and will not slide through the sealed cartridges...any suggestions? its an old school DK General Lee with an iron cross 3-piece, 1995-99 model i believe, are some spindles just not compatible for a bb?
@hoohoohoblin10 жыл бұрын
I think you need to buy a new axle, built for sealed bearings. Probably new cranks too, but maybe not,
@2121ELTIGRE4 жыл бұрын
I learned something today....... Thank you :)
@hoohoohoblin4 жыл бұрын
You’re welcome
@wydocq55246 жыл бұрын
Amazing method to install BB :) Like it more than smashing with hammer.
@joeydube4204 жыл бұрын
hahahah they should fight, that shit was so subtle and funny
@hoohoohoblin4 жыл бұрын
Thanks
@ImNotT109 жыл бұрын
Thank you so much! Now i know for sure i'm suppose to take out the cups. I had the exact same issue as you which is i had unsealed bearings that kept breaking. Hopefully i can get the right bottom bracket kit. I measured 3/4 of an inch so would i get the 19mm american/mid off danscomp? Thanks for replying if you do.
@hoohoohoblin9 жыл бұрын
Xex Jakee You're welcome. Check the video description for links to the parts we bought. I can't remember what they were, but I wrote it in the description.
@jonitobaltar13546 жыл бұрын
Jimmy's Mouth louder than my cassette hub XD
@hoohoohoblin6 жыл бұрын
Ha ha!
@xavieralmeida245111 жыл бұрын
thanks man you are my savior
@adamsifford44487 жыл бұрын
Most helpful vid got an old school bmx I would like to bring back up to date..
@aphex144 жыл бұрын
Thank you for this! I'm planning to do this on my '87 GT Pro Performer.
@hoohoohoblin4 жыл бұрын
You’re welcome.
@CapeFilms10 жыл бұрын
hello im kinda new to BMX im having the same problem im going from 1 piece cranks too 2 piece cranks would I need to change the sealed bearing bottom bracket???
@hoohoohoblin10 жыл бұрын
Cape Flims Yes, you would need to install an American Sized sealed bearing kit. We bought this one for $19.99. www.danscomp.com/products-PARTS/456061/Mechanik_BB_Kit.html
@mikaelsongameofwar23606 жыл бұрын
Get rid of those piss take to change 1 piece crank sets lol 😂
@prostreetman12310 жыл бұрын
Um I have a few questions did u buy the sealed bearings with the cranks or sepretly and how much did the cranks and sealed beaeings cost
@hoohoohoblin10 жыл бұрын
We bought them separately. The bottom bracket is a Mechanik 19mm American sized kit, which was $19.99. The cranks are Sunday Sakers. I don't remember what they cost, but I think it was around $60.
@prostreetman12310 жыл бұрын
***** alright thanks alot im getring my parts next week so im not shore waht was I suppose to get for the the bottem bracket and cranks
@thomaskan28528 жыл бұрын
how do you get the black insert things? do those come with the kit?
@hoohoohoblin8 жыл бұрын
They came with the kit. Not sure what they are called.
@thomaskan28528 жыл бұрын
+hoohoohoblin thanks. using this video i got the old one piece cranks out!
@jaymags3458 Жыл бұрын
My sprocket has a spacer built into it. Do you have to have an additional spacer of any kind between the sprocket and the euro bb? Clearance is fine and chain in straight.
@sp21wy104 жыл бұрын
we bought an adapter for american to euro but it looks like the sealed bearings stick out too far. do they make different adapters that will allow the sealed bearing to sit flush?
@hoohoohoblin4 жыл бұрын
They should be flush. on mine, they went in all the way. Maybe the spindle is too long.
@canniggiasweldingfabricati854110 жыл бұрын
Sir thank you for your video, i ordered my seal bearings set and a 19mm axle with 8 spline from eBay. I use back my cranks, because it's a 19mm an has the same 8 spline thanks again.
@hoohoohoblin10 жыл бұрын
canniggia morgan You're welcome. I'm happy I could help.
@kylerblevins86792 жыл бұрын
Thank you so much I love the cranks🙏🏽🙏🏽
@hoohoohoblin2 жыл бұрын
You’re welcome
@crcarta8 жыл бұрын
Great video, only one out there that helped!
@hoohoohoblin8 жыл бұрын
+Chris Thanks.
@MrThorMNFinest6 жыл бұрын
Thanks bro! Totally Awesome!
@hoohoohoblin6 жыл бұрын
You’re welcome.
@ChrisBartTsak9 жыл бұрын
hello i have a 1pc and i want to order a 3pc set with american bb's my problem is that the bol bering say that they are 4.1mm outer diameter and my bmx holl is 5.1 outer diameter is there an adaptor i can get or are they different sizer of bb's???
@Xenro669 жыл бұрын
Chris BartTsak Spelling, grammar and punctuation. You have none of these qualities.
@hoohoohoblin9 жыл бұрын
Check the video description for links to a sizing chart and the parts I used to do the conversion.
@ChrisBartTsak9 жыл бұрын
ok man thanx!
@ChrisBartTsak9 жыл бұрын
Jordan O'C idgaf :P sorry not my fault im from greece