Thank you for this video. I couldn't even see up there behind the sink. This helped me visualize what I was dealing with so that I could get the old faucet removed.
@TheEclecticHandyman7 ай бұрын
Glad it helped, thanks for watching! 🛠️
@PurpleDrankYoshi Жыл бұрын
THANK YOU. All the other videos showed totally different faucets and I was looking for a nut that didn't exist!
@TheEclecticHandyman Жыл бұрын
Glad it helped! 🛠️
@daspacechoechechoz90284 ай бұрын
Never de-installed this type of faucet before. Was at a loss until I found your video. Thanks for posting!
@TheEclecticHandyman4 ай бұрын
Glad it helped, thanks for watching! 🛠️
@mranalogy843 жыл бұрын
Thank you. I am working on one now and you saved me some fussing and cussing.
@TheEclecticHandyman3 жыл бұрын
Glad it helped, thanks for watching!
@ritalockett97883 жыл бұрын
Informative as always. I bet the hardest part is getting under the sink,not much room there for working.
@TheEclecticHandyman3 жыл бұрын
Yes indeed. I had to get in the mindset to get on my back and crawl under there. New faucet is nice though 😁 Thanks for watching!
@jhors77772 жыл бұрын
Thank you for posting this helpful video.
@TheEclecticHandyman2 жыл бұрын
Glad it helped, thanks for watching!
@xx71012 жыл бұрын
I had same issue. I wd40 from bottom and top. Removed faucet handle and spun fixture from the top using vice grips. Once loose i held mounting ring inside cabinet while partner spun fixture from top. Thanks for this helpful vid.
@TheEclecticHandyman2 жыл бұрын
Glad it helped, thanks for watching!
@Troublemaker1022-r9c Жыл бұрын
In theory...... This method is great... HOWEVER..... I've NEVER seen threads so clean on an actual faucet that needs replacement.
@TheEclecticHandyman Жыл бұрын
Yeah I'm not sure why this faucet had such a short life (it was probably 12 years old), but the new one has been much nicer.
@danieltannenbaum96673 ай бұрын
Thanks, need a tool cuz mine is stuck on GOOD, but this helped A LOT
@LivingLikeLarry3 жыл бұрын
You lucked out, anytime I have a plumbing job, the hardware is ancient. Great how to though. Made it look like an easy job. Also may save someone else from making that same mistake.
@hcarducci8 ай бұрын
Big help!! Thank you.
@azrock2353 жыл бұрын
Thanks for the info MMM! 👍🏼
@jadusa012 жыл бұрын
My one-hole pull-down Kohler kitchen faucet looks the same in your video. I need help on how to replace the hot water hose. Thanks!
@michelebinder8074 Жыл бұрын
There's been some water leakage, and the brass looks green. It started to unscrew and then got hung up. It's loose enough that the whole faucet rotates. And gawd, what a cramped area to try to work in!
@foxywolf17773 жыл бұрын
Note to self: You don't have the good tools and you Jumpstart bodies....Call the plumber if The Eclectic Handyman is not around 🤣🐾🦊🐺
@TheEclecticHandyman3 жыл бұрын
Hahaha! BTW can you believe on another nut under the sink I actually didn't have a socket of the right size?? I kept saying to myself, "all these tools and I still am missing some!" 😂
@foxywolf17773 жыл бұрын
@@TheEclecticHandyman 🤣😂
@janneydeveault9957 ай бұрын
thanks so much!
@todnelson7235 Жыл бұрын
I couldn't get any leverage on the ring. Partially screwed the smaller screws back in and had something to grab and start the process.
@sharonneider85144 ай бұрын
Going to try this next.
@tmcboston13 жыл бұрын
I have this exact problem... i tried a large bite basin wrench but cannot loosen this round nut. What next, grind it off with a Dremel tool? any advice or encouragement would be welcome
@TheEclecticHandyman3 жыл бұрын
Maybe try spraying with some penetrating oil and let it sit for a while. I have a 13" Craftsman adjustable wrench I use for under the sink as it can be expanded quite wide. Hope you can get it removed!
@stevetrivago2 жыл бұрын
Thanks
@ThreePhaseHigh3 ай бұрын
The split ring with those two tightening screws is a piece of junk. Go back to the one solid ring and tighten it up. Otherwise it’s gonna come loose all the time.
@amazingme8944 ай бұрын
Omg i didnt know it turns…. I was trying to rip out that whole ring after taking out the screws IM SO DUMB