How to Remove and Install a Bicycle Tire & Tube

[@kathleensieger8312]

Man, you saved my life. Husband always change the flat tires he’s gone on to another life leaving me with a flat tire on the trail. Your instructions covered every single thing I needed to know I was successful thank you so much

[@joey5933]

that is really beautiful to hear. Im glad you were able to do it and still ride. Best of luck to you and rest in paradise to your husband 🙏

[@yaadasshows]

❤

[@markjmaxwell9819]

Just repaired my first inner tube for twenty years after a half inch slit was found in the tube after it blew out . New rim tape was applied properly on both rims and a patch applied to the tube . But a winner in the end with help from the video above .

[@tpstrat14]

I was considering making a bicycle repair youtube channel, but it looks as if there is no need for it. This is the most thorough, helpful, beautifully HD how to video series I've ever seen. Amazing

[@Ryan-df3km]

Never give up on a dream

[@mattdrives4757]

Do it anyway. Variety is good

[@bryan1377]

Still do it man, I’ll need your videos to help myself and others

[@Limitlessquad]

do it for wheelchairs too

[@prepoutsidethebox9829]

I'd do it anyhow. You may have an approach that someone else didn't think of. After al, these guys have every tool imaginable and a shop set up just for bicycles. We don't all have that. Some of us would like to see the "everyman" approach.

[@DJads000]

Im watching this from the side of the road

[@RandyRelish99]

Did you make it home king?👑

[@soul_traeh]

😭😭

[@s101077]

❤

[@william.darrigo]

😂

[@OrakuSaki]

Same

[@BengCurd]

I like the fact that you show as the common mistake inside the video instead of other youtuber where they just verbally say it.

[@Snetzelsnetzalsnetzul]

My exact problem

[@ptbietz]

how do you verbal say anything?

[@expert25]

@@ptbietz What he's saying is that other youtubers don't demonstrate other problems such as the various types of things sticking into the tube or how a tube can be improperly seated. They probably say "if your tube is not seated correctly, do this". This KZbinr actually demonstrates with both verbally and video snippets. I hope this helps clarify.

[@BikeYoga]

💯 The thoroughness of it allowed me to discover that I had a leak at my valve. This told me exactly how I bust the tire (improper inflating) & told me exactly what I needed to do to avoid doing it again. Thank you PackTool!

[@only2sea]

​@@BikeYogaPark Tool. :)

[@ramondabe]

Female, 73, first time I've changed a tube in a bike using a new tube. Your video helped. Thank you very much :)

[@aldryxz1023]

I buy and use parktool tools as much as possibly as I can. Because I get the education for free from parktool. Thank you Parktool and Calvin Jones!

[@kieranbonds]

Thanks. I couldn’t for the life of me figure out the difference between a tire and a tube, even with reading multiple articles and spending a lot of time staring at my bike. It made no sense and it was so frustrating 😂. Then I figured a good visual aid would help. Took me half the video, and then it clicked. Ohhhh! That makes sense! It’s a good thing too. I realized today my tires (or tubes I guess) aren’t holding air and go flat in minutes. Not very surprised, I took my bike with me on a 6 month RV trip across the country with a cheap bike rack. But now I know I should only need to replace the tubes. Which is great cause I really like my tires. We’ll see how long they can last (if they are still lasting). 🤗

[@chantelfigueroa373]

I haven't put together bikes for a long time my son and I jumped on KZbin so he could learn and we stumbled on this channel. I want to say what Amazing! instruction this was!!! I was impressed with your showing multiple valve options and your side by side shots, clear instruction and brilliant lighting made this video easy to watch and easy to understand!!!! We will be coming back here for all our bike referencing needs from now on! Well done!

[@sledgehammer301]

Couldn't agree more with your comment Chantel. it was a delight watching it. No hand held 'I'm too stingy to buy a tripod' shaking camera, no heavy breathing behind the camera like the presenter is about to have a heart attack, no giggling behind the camera, no focus problems, no rambling, no dirty dingy garage, no some random cat walking in the shot and then the presenter goes off in a tangent about the cat and no "Editing??? what is this pagan magic you speak of???? Editing, never heard of it" A very good video, with subtle humour, like 'find out what caused the puncture" and there is a massive bolt thru the tyre

[@siobhannelson493]

That's the same with me! he is amaazing very clear and helpful instructions, even for a simpleton like me that has never done something like this.!

[@rodneyjohnson4794]

@@siobhannelson493 you're not a simpleton- merely unlearned. you are correcting that and i applaud your desire to learn.

[@gregroehrig1864]

I y lo k🎉pyyohhi l. Bc r 2 s t. Cuz x x zf c rs28,, cd i n

[@shaggy4real97]

This was a godsend for me. I had been dreading trying to take off my wheel for repair myself out of fear of damaging the new parts, but your tutorial was the best find for me. I would pause and rewatch segments to follow your steps and I finally got the tubes replaced. Thank you so much, I will be off riding my bicycle

[@kaleishaallen9054]

Nah

[@wiktoriagwozdowska5484]

This is exactly what I fear too 😅! I have very limited money and I'm so worried I will blow this tube 🫣. I'm concerned after watching this 😂 Especially considering I have no clue how much air is enough or not enough 😬

[@FlightPolice]

I am just going to buy a new bike.

[@bubm5163]

Artur me too this is just too much

[@Cloudrak]

You are so lazy.

[@gl1zzy999]

I don't think y'all realize this is a joke.

[@scotscub76]

I often think this is the sensible option. The definition of madness is "doing the exact same thing over and over and expecting a different outcome". I always expect I might master this one day without a nervous breakdown and copious amounts of bad language and tears in a rural field surrounded by dung.

[@jtlast9600]

D Fine this comment is legendary

[@MariaHallett]

This video saved me a lot of time waiting for appointment at the bike shop and about $20! I had a spare tube and was able to make my first swap at 45 years old! Was also a good mother/daughter teaching moment. Thanks!

[@SW4Life202]

I'm 40 and just changed an inner tube for the first time ever. My 9yo is so happy.

[@GeneJolley]

Extremely helpful. This actually took me the same amount of time to change the tube on my bike as it did to watch the whole video. Thank you. This was the first time I have ever changed a bike tube. Great Tutorial!

[@twotimesproductions680]

Dsgg

[@scotscub76]

@SC EM 😂😂😂😂😂

[@jaykilby5462]

Same

[@SucculentDoorbell]

I agree. It's the most informative. One click, all I need.

[@Billyward1019]

Gene Jolley lmbo

[@lauravictorious4670]

I used this video to help me to change my rear bike tire tube. I've NEVER changed a bike tire tube EVER. It took more time than it would for a pro but I need to know how to do this as I plan some really long bike rides, solo, and I don't want to be that helpless woman on the trail. This is better information than another video I watched. I HOPE I did everything properly. I have an old 10 speed bike I'd like to rebuild and I will put the new tires and tubes on that as well. Thank you for the information.

[@ihateurvid]

More instructional videos need to be like this. To the point, informative, useful and no bullshit. This was beautiful.

[@izak5356]

Username does not check out

[@Bull3tBikes]

@@izak5356lol

[@cluedoyeah.5653]

​@@izak5356😂

[@ayu1978]

I am eternally grateful, had a pinhole puncture and had to replace the tube. I was trying to fit a continental gp 5000 clincher without tire levers and spent three hours juggling with trying to fit it onto the rim without any success. I was about to take the rim the next day to a bike shop. I looked for various videos for guidance but yours was the one that worked. I took a deep breath, followed your instructions and worked the bead around the rim patiently. It finally fit! Love the channel. It was my first try at replacing an inner tube too! Thank you!

[@DFX2KX]

Thanks! I just bought new tires for my bike, and I've never changed them before. This video brought an end to two hours of confusion.

[@ranaypadarath]

Just replaced my front tube using this tutorial! So proud of myself. Thank you to the team putting this content together.

[@dirtyd9219]

I frequently find myself watching "how to" videos and I'm usally left frustrated because usally they either don't show important steps or waste way to much time with nonsense filler to try and make the video longer, but this one was genuinely a great "how to" video. Nice job👍

[@barbraharkness1969]

Thanks Calvin! I am a 52 year old woman and just successfully changed the tube in my bicycle tire.

[@moony2703]

Wow that’s _a lot_ of visual examples of potential issues, thanks for putting so much time and effort into getting and collecting them all in together!!

[@newq]

Man, imagine how many people would have to find all this extra stuff out the hard way if this video had just been a basic how-to and nothing else. These guys really went above and beyond.

[@shaylebennett7310]

Thank you. I just did 4 wheels and inner tube. Was definitely easier watching you do it. My hands hurt but my kids will be so excited!!

[@parktool]

Glad it helped!

[@TheDlj60]

I ignored this video because I felt it was too long. While following what I heard and saw on a previous video, this one came on. I really appreciated all the good tips as well as clear and thorough instructions. I almost threw out the bad tube but upon hearing the explanation of how to find the hole, I found it and will repair it. I really liked how to tell what happened to the tire based on the kind of hole made. The hole was small and easily repaired. Thanks for helping me save money.

[@pjsamith]

What an exceptionally well-made tutorial. You thought of everything for us and obviously have great respect for your audience. This was extremely helpful. Thank you for posting this!

[@jen3800]

i have been fixing flats for decades and not once did i do things this way. this changes everything for me. now i can focus and be efficient. i knew about seating the tire but not the tube in the tire install part. my next flat... i'm doing exactly what Calvin says to do. Also, I must buy those clear patches. Brilliant!

[@jamsaturay3989]

Jmmnmnm nnnpmbmmmknmnmvkcbcvvbcnxbNمامتتندِتتمپپنووووچو.چوپِرِ د تدرزتالاااتمگناررِِِرِزاهسمستیلِلاان

[@muzikalist11]

Really enjoyed the self hand-slap when inserting the lever at the valve. Gonna remember that now.

[@keithpatton34]

I hadn't replaced a bike tire and tube in over 50 years. Checking for rotation direction wasn't a thing the last time I did. Thanks for making the instructions clear.

[@axetrac10]

Park tool just manages to consistently make the best videos on bicycle repair across YT. Excellent camera angles, clear directions, perfect captions and excellent sequencing of the process or steps. Thanks for all your vids.

[@wongjimmy3189]

As a cyclist, I was ashamed to admit that I don't know how to change a tube until this video came along. So detailed and beautifully done that I have the confidence to buy a tube and change it myself after only watching this video twice. Hope my tube last long enough before the next puncture.

[@marioschroers7318]

No need to feel ashamed. I replaced tyres and tubes for the first time today, including I unmounted the wheels from a bicycle for the first time in my life. There's a first time for everything. You will only fail if you never try.

[@joakimberg7897]

@@marioschroers7318 True. Very true.

[@JudeTheYoutubePoopersubscribe]

Never done it either, it's my first bike in 15 years and I never learnt this stuff as a kid

[@sebastienriou6603]

Thanks for the help. I've been able to return to a childhood passion that I left aside for about 7 years, because as a kid, I kept trying to pump up the tyre, not realising that the tube was busted. Thanks to this video, I realised that I had a perfectly functioning replacement tube sitting there the whole time, and once I learned how to install it, I was all good =).

[@propsaganda]

Thank you for this very thorough and detailed explanation. I especially like that you have a separate video referencing how to remove and install a bike tire. I’m pretty handy but never fixed a bike flat. I worked on this with my 14 year old and his bike, and we were able to get the job done and spend quality time together. Beautifully done! Much better than the video recommended by the manufacturer of my new inner tube.

[@AzimkhanYerzhan]

I just spent 4 hours trying to properly seat the bead but the small part of it didn't come out. Almost gave up but this trick with soapy water DID THE JOB (8:16) Thanks!

[@poor_impulsive]

Yeah, im going to try this now... been getting frustrated with multiple attempts without soapy water

[@petermoeller5901]

This is a great video. It is now all coming back to me. I repaired punctured bicycle tyres all the time when I was at school and uni but have not done that for about 30 years now. Just recently bought me an ebike and punctures may become part of my life again, haha. In those days I had to pull the freshly repaired tube out again several times because I didn’t know some of the things this video mentions. For example, I didn’t check the tyre for any embedded thorns or objects. Also, inflating the tube before reinstallation is important, to avoid the tube getting snagged and damaged. Thanks for uploading the video, it was a good refresher for me and I don’t think there is anything that could be added.

[@funny-video-YouTube-channel]

Good video. The tools make this process more easy. Many people will just pay for the service, because it's easier.

[@berniesmith7640]

Agreed. But I realized if I can't change a tube or tire myself I'll never fix a flat on trail to get home

[@unclefreddieDied]

came here to see if it's ok to still use screw drivers, like I did as a kid

[@TheDlj60]

Bernie Smith I guess it depends on your bike. I’ve done it alone several times. I kept getting flats in my rear tire. I finally realized I needed a new tire as the one on the bike was badly worn. I replaced both tires and tubes alone. Much success to you.

[@richardpeake8653]

Tyre levers

[@lecapitaine7895]

I used spoon to remove the tire. I guess I damaged both of my new tubes. That tire lever is essential tool.

[@Deormayoks1]

Thanks for this video. It was all I watched to fix my son’s bicycle wheels. Having put the repair aside for about a month,i contemplated taking to a repair shop , this video was the fix. The joy on his face was priceless. Thanks again

[@__-pl3jg]

Park Tool videos are great! Very well organized and produced. I like that they show how to do everything on multiple bicycle parts. Thanks guys!

[@deckmageccg3561]

Now this is what I call old school!! Seeing that bucket of water and patch kit just brought back memories of being a kid in the early 80s! Yep, the good'ol days, when a Road Bike was known simply as a 10-Speed and a BMX bike was known as a dirt bike. Miss them days.

[@mattdrums4you]

8:13 was one of the most satisfying moments of 2020

[@johnmarston9955]

despite the fact this video was made in 2016?

[@raymus_7941]

we needed that bro #2020

[@mattdrums4you]

@@johnmarston9955 haha yep. Didn't exist to me 'til 2020.

[@mattdrums4you]

@@raymus_7941 amen 🤜🤛

[@mattdrums4you]

@@raymus_7941 oh wait, social distancing. Amen 🤜...........................🤛

[@yinqiuzhao7513]

Covered all the points. If anyone follows this video who won’t have any issues with fixing tyres. Thank you so much for sharing this video

[@skypix777]

Thank you, super video. I haven't changed a bike tire since I was 11 years old (61 years ago!) Needed a brushup, yours is perfect, very professional.

[@SirBrass]

I just followed the directions here when swapping 2.1" knobbly tires for 1.95" street tires on my hardtail. It worked great! Thanks for demonstrating how to do it. Now that I've done 2 tires, if I get a puncture on this weekend's Fondo, I'll know what to do and won't be fumbling with how to swap in a replacement inner tube or resort to calling the SAG support guys!

[@hoodedknave3104]

Subbed because of this video. Precise, to the point, and detailed enough to be informative but not oversaturated as to make the video 30m long.

[@marcw6875]

I recently returned to the world of bicycles after a hiatus that had lasted since childhood. I think I might have finally found a channel with enough detail to make me semi-confident about doing some of these things. Nice video.

[@jimmyjam2540]

A little embarrassing. I use to fix my bike tires my entire childhood but for the life of me couldn't remember the steps. Even put a hole in the new inner tube trying to fix it by memory. So here I am.

[@Officialmryuck]

It happens dude

[@lukebyron1193]

Haha I hear you. Same story.

[@mikerasnick3988]

I did this for second time yesterday. Completely two different types of tires. Thank you for your videos, they are a life saver!

[@blessedwithtwo2075]

I just changed a bike tyre for the first time in my life! 🎉 I am 50! This video was spot on. Thank you 😊

[@jameswalsh6067]

I am 46 and came here to say the same thing!! Thank you! Very clear and easy to follow steps.

[@bee4590]

genuinely really appreciate the time you took to go through the different punctures and how and why they happen. i watch a lot of baking/cooking videos and my pet peeve is when they say 'dont do x or y will happen' and there are 0 examples (in their video or uploaded by anyone else) of what they're telling you what to watch out for. going through all the scenarios of how a tire pops and overinflating the tire to show the exact type of pop you'll experience is incredibly informative

[@thekangaroo1880]

I know how to do this but watching park tool is so relaxing

[@UltraDarkVax]

I keep coming back to this video whenever I need to repair a tire tube.

[@thekangaroo1880]

@@UltraDarkVax don't you have like a good memory tho?

[@bmxscape]

i am a bike mechanic and i watch park tool videos for the same reason lol

[@thekangaroo1880]

@@bmxscape ye

[@ilovecarbs66]

i’ve been installing tubes/tires for 20+ yrs and that shit has never gone this easy hahaha

[@redremi83]

Worked great! I'm a girl who will be changing her own tires from now on. I think it is important to mention that you have to swap the inner tube to one side of the wheel and make sure that on that side the outer tire is over the rim so there is room to slide it in. Inflate inner tube minimally, slide in, deflate and then put that side of the outer tire in the rim.

[@malificentevil9518]

I’m repairing a tricycle tire as a beginner and this was very helpful

[@ryanfrizzell736]

Nice video. With this information I can better manage my inner tubes and keep them fit for the road. Thanks

[@kenny2006sp]

I’m crying. I can’t remove the tire

[@curtbeltpants4824]

You can bud

[@VictorA-dw9uo]

I’ve lived in Dallas so I would just go to my local 2 mile shop n get a new tube walk in n walk out in 5 min pay $10 ohh boy is small town living bad lol nobody to do maintenance all relying on my own lol the closet shop is 39 miles away lol I’m having to tie a ratchet strap from the roof to do work on it hehe

[@shamrezali]

@@VictorA-dw9uo

[@Mangust2]

Push in the middle. Nothing change. Can’t hook up tire. It is just too tight on both ages. And it return back to edges

[@Kenny-ot4yx]

Me either it's WAY too tight and firm on the metal

[@cratecruncher6687]

Veterans probably laugh at how simple these videos are but they help a guy avoid mistakes doing it the first time. I especially like the "don't let this happen" stuff. It takes time to think of and set up all of those screw ups. The production quality is pretty good too. No blaring guitar solos (lookin' at you Eastwood...) Even a little humor (railroad spike through sidewall). Mr. Parktool's moustache frightens my small children though, hehe.

[@starclipper01]

Great DIY video. Saved me a trip to a bike shop and avoided paying $ for parts and labor. Thank you!

[@goober8798]

I was originally going to dismiess the whole inspection part ("my tube is flat, I'm upgrading it anyway...") but the parts about spokes and the rims had me glad I checked. Great video!

[@gerrygallacher9175]

Thankyou that was really helpful for a dad to get his son on the bike, from a dad who hadn't learn bike stuff all his life.

[@havocproltd]

yep. haven't replaced a bike tire in over 40 years. A little refresher tutorial was just what i wanted. thank you!

[@wonderfullyamber3970]

After just one watch, I now feel like I am capable of repairing my tire.

[@XavierBetoN]

I'm with. This guy teaches faster than Morpheus teaching Neo kung-fu.

[@phallystorm]

812 people who dislike DIY Bike Maintenance. Shame on them. This Guy RULES!!! Thanks for your help.

[@maychan1647]

Thanks for the video. The instructions were so clear and I changed my first bike inner tube for the first time with this video in 21 minutes. I love the parts where you describe where it can go wrong.

[@thinkpadBentnoseTheBlind]

great video. but i have been a mountainbike mech for 25 years and I must say this. All new tubes have a thin layer of talcum powder lube on them. When inserting a new tube or a repaired one to add some talcum powder is wise. helps keep that patch cement from sticking to the tire and also helps with pinch flats. try to recall that valve that was on an angle and you couldn't get it to be true. you had to remove the tube and then reinstall. That is usually because the tube and tire both moved from the tire being too low in pressure. yet they won't move freely,hmmmm. Powder them . i put some in the tire and rotate it until all the inside surface is coated. some may not like this advice,but I don't get pinch flats . cheers and keep up the good work Park tool

[@seanahuizenga2202]

Thank you! Way easier than what I was trying. I managed with the back end of spoons in place of tire levers

[@michaelmurphy6434]

Thanks Calvin, since its been 50+ years since I've done this, great to watch someone do it correctly, I just did the front 4 days ago and already forgot how to do it. Thanks to KZbin and Park tool! Mission acomplished!!

[@kineticBoss]

Very clear and descriptive explanation. Loved how you covered each possible problems.

[@RaphaelDawkinsCombatRadio]

Having not done this for decades I must say I found this video not just helpful but enjoyable over my Sunday morning porridge.

[@Mike-pj1kv]

Important for me was to deflate the tube well when taking it off and inflating the tube partially before installing the tire. Otherwise it's quite difficult getting the tire off and on.

[@Beer_Dad1975]

Excellent video, hadn't done a tube replacement since I was maybe 15 - over 30 years ago anyway - and my Son came home from school on Friday with a puncture. Was going to take it to the local bike shop, but my wife works for an E-Bike importer, and got some free inner tubes, so I thought might as well save the $20 or whatever the local shop would charge. Your video made it easy! Also was able to teach my son. Thanks!

[@przemekmarszalik]

Cheers to people that grew up without a dad that taught them this. You’re not alone

[@arachosia]

Most be nice to have a dad.

[@munson791]

Never changed a tube in my life, and now my bike is ready to go. Thanks!

[@katsika84a]

Thank you so much for this very valuable info. I just changed my first tube, everything you need is in this video. I also bought your tools to support your company. Keep up the good work

[@JohnnoKeetels]

This series of videos is so helpful. Explanations and examples are so clear & concise. I’m a biking rookie, so I really appreciate your expertise. Thank you!

[@cvcexcomm]

They make this sound so relaxing and easy. I'm that guy that is sweating profusely with greasy black fingers on the side of a road while my bike club decides to be nice and "wait" and provide an audience watching me repair my tire. All while I'm thinking in my head, "fck me...I have white handlebar tape"

[@galeonvanessamaeb.7601]

Hahahhaa

[@ThePortal101]

Haha I was thinking the same thing😀

[@dudes_0498]

Same experience bro

[@angelaperetti5390]

Watching this 5 years later and wanted to say how very helpful this still is. First time changing my tubes and tires after having the tires on my bike for wayyyy too long. This was such an informative video. Thank You!!

[@NonLegitNation2]

everyone here knows at one point they just used a screwdriver instead of tire levers or in a real pinch a butter knife, lol, we're all guilty of it.

[@bbylungs6708]

Dude Im using a flathead right now cuz I don't have a lever and I had to stop to respond to your comment 😂😂😂

[@Spwilson18]

I actually ended up buying the lever's to do it myself

[@mozzi7463]

I’m so glad this video is out, Ngl I always hated changing inner tubes until you showed me how to correct remove it. I just replaced mine and realised my front v brakes wire holder had snapped. Accident avoided

[@gwarlow]

How are there 250+ dislikes for this video? KZbin "bots" or "creative" algorithms? Makes no sense to me. Great instructional video. I would have given it two thumbs up if it were possible. Cheers.

[@lass-inangeles7564]

Great demo and excellent instructions. Please avoid music it distracts from voice. Here are my notes so everyone can have a copy for reference: How to Change Bicycle Wheel Tube and Rim Tape 1. Deflate tire entirely as per valve stem methods: Presta, Schrader, Dunlop valve stems. 2. Remove tire using tire levers. 3. Remove tube and rim tape 4. Inspect tire for puncture wounds - if any cuts went through the tire, replace tire. 5. Inspect tube and valve stem (if reusing it) else discard. 6. Clean wheel rim with soap and water and let dry. 7. Stick the rim tape on inside of wheel rim covering up the spoke nipples. Pick right size and type! 8. Inflate new tube and check for leaks in tube and valve stem in water. 9. Partially deflate tube and insert into tire, lining up the valve stem with PSI info marked on tire, for ease of refilling. 10. Check tire for arrow marking > or < showing direction of tire rotation. 11. Line up wheel rim with tire based on direction of rotation. 12. Insert valve stem into wheel rim. Make sure it sits up straight not at an angle or it will pierce the tube beneath it. 13. Deflate tube completely. 14. Work tire back onto wheel rim working one side at a time using fingers. 15. Do same for other side of tire, making sure that tube is pushed back inside tire as you go along edge. 16. Use tire lever to finish last bit - very carefully - so you don’t puncture tube inside. (It helps to sand down sharp edges of plastic if any on tire lever or use one with rounded edges.) 17. Rotate tire and visually check to see if tube is properly seated inside tire on both sides and tire is beaded (inside rim) all the way. 18. Partially inflate tire and check again to see if tube is seated properly on both sides and not peeping out of rim and that tire is also beaded right tucked inside the wheel rim. 19. If not right, deflate tire, and fix issue. Partially inflate again and check. Repeat this step until both tube and tire are seated and beaded correctly. 20. Use soapy water to lubricate and facilitate beading of tire (seating properly inside rim). Do not use oily lubricants! 21. Once tire is beaded right, check PSI marking next to valve stem and inflate tire to this pressure, taking care not to overinflate. If tire pops out of rim, repeat above steps. Usually front tire is slightly less inflated than rear tire so as not to bounce when you ride. 22. Presta valve stem - Tighten the lock nut at tip of valve first. Insert stem nut (round ring) onto valve stem and tighten ring type lock nut it at the base near the wheel rim. Install black valve cap over valve stem tip so dust does not clog this delicate mechanism. Use Presta tip to inflate. 23. Schrader valve stem - Replace valve cover. Nothing else needed. This is the valve that is the same as your car tires and accepts car tire inflation pumps (but with care!). Use Schrader tip to inflate. 24. Dunlop valve stem - Tighten the ring nut at base of stem, replace valve cover. Use Presta tip to inflate.

[@chrisramir09]

The music was not distracting in the slightest. This video was perfectly edited.

[@navi-charlotte]

Hi! I just recently got myself a pair of those amazing TL 6.2 . Best levers ever! they made the installation of my Maxxis Hookworms so enjoyable!

[@magicunicorn6535]

I just successfully replaced a tire tube for the first time after watching this video! Thanks for the great tips!

[@yuurishibuya4797]

Awesome dude, simple and no extra talk. 👏🏻👏🏻👏🏻

[@anivdelarev5300]

This is the most thorough, helpful, beautifully HD how to video series I've ever seen. Amazing

[@vgm_central]

Removing my tire is like removing a stone brick from a wall

[@Coolguy-idk1]

Fr

[@Officialmryuck]

You must have an electrical bike too

[@vgm_central]

@@Officialmryuck indeed xD

[@BubblesPothowari]

My learnings fm this lesson: 1. Use second lever to "unzip" the 1st rim of the tyre. It works !! 2. Beware direction of roation. Its amrked on tyre too. 3. Partially inflate the tube is sure magic. 4. Was able to slip back the tyre both rims without the levers !! You insired me.

[@Lilacs-us6vi]

Wow, you are an absolute lifesaver! Thank you, thank you for helping me change my first tire. Very well-explained, and plenty of "what ifs" solved.

[@sheilaheinrich2656]

Very good video. It brought back a lot of the information I learned decades ago but had forgotten. Now, to watch another video on removing the rear wheel and I'll be ready to change out my inner tube. My only other comment is that the background music is a bit too loud, but I realize this is an older video and don't expect it to be changed. Tx.

[@jptrainor]

I just watched a video where the mechanic suggested ending at the valve when mounting because it gives the opposite side of the tire room to seat itself in the inner, deepest, part of the rim during the mounting procedure. That makes installing a tight tire much easier because it maximizes bead clearance. If the opposite is done then the valve interferes with the tire's bead and that reduces clearance. It makes sense. This is apparently very important for some notoriously tight tires such as Continental Gatorskin tires. A similar technique is necessary to mount car tires by hand. You have to position the bead over the deep center of the rim or the opposite bead will not clear the rim without extreme force that may not be possible to apply by hand. In fact , rims are designed precisely to provide this clearance.

[@parktool]

Thats correct. That is what most tire and rim manufacturers are suggesting now. It can make a big difference.

[@dib6729]

@@parktool Massive respect for replying to a comment on a 6 y/o video

[@jefflopinski6264]

Iwent to my favorit bike shop to get tires trued.I try to do brakes myself. He had your book there.Offered to buy it but he says it it for bulinding bikes. Sent me to your KZbin site. He said you have the best turtorials. He is very fair in prices.

[@wildzach]

*note* It's 400x harder than how he makes it look

[@benpm2568]

No it's actually that easy after the first time that you've done it

[@Mike-pj1kv]

Then you need to stop working on bikes.

[@Bruhman_16]

Park tool: saving people time and money on a daily bases Now these people are good people

[@KeshAndrew]

I love your channel, it is so useful and the way you explain is great and easy to understand! Thank you for all these videos and I hope you will keep them coming. Best of luck!

[@Phoenix-qk4pd]

After 2 days of frustration, carefully examining this video for 2 hours of this video, I did it. Thank you

[@TheMarkoPoloProgram]

This was so helpful. Now, all I need is a new tube, tire, bike levers, maybe an air pressure inflator to save me some energy and time, oh and some money to purchase all of this.

[@Michael-wn4jj]

Great demonstration! Additional regulary check that vulcanizing liquid used for the stickers. I didn't get a tire flat for several years. Finally when it happened I had sufficient stickers to fix it but the liquid tube was dry out completely making me walking at home. Lesson learned on the hard way!

[@eatyourspinachtomperez8700]

Awesome. Thank you.

[@jasminjavorina199]

Removed, patched up and re-installed the tube & tire, all thanks to your videos, all within an hour. Many thanks for this great tutorial!

[@sammydproductions4424]

I'm crying I can't put the tire back

[@EddieSmith917]

I couldn't get the last part no matter how hard I tried. Went to a repair shop the skinny guy just pulled it on with his hand in about 3 seconds I was amazed 😅

[@maniakk3563]

i dont think there's anything wrong with my tires but this is useful to help me inspect it. I'm mostly winging it with my bike restoration, but these videos really help out when i'm stumped

[@jdssurf]

Awesome soap spay idea.

[@evandermursh8410]

Thanks man, super clear and concise