How To Remove And Repair An HVAC RLS Crimp Fitting

All my favorite HVAC tools: www.amazon.com/shop/thediyhva...
In this video, we walk you through how to remove an RLS hvac crimp fitting. It is quite easy to do! If you found this video helpful, make sure and leave it a like and consider subscribing to our channel!
Follow us for more diy hvac tips & to enter for our giveaways!
Instagram: @diy_hvac_guy
Tiktok: @diy.hvac.guy
IF YOU ARE IN NEED OF GUIDANCE WITH YOUR HVAC SYSTEM, whether it is diagnosing a bad part, replacing your system, or help with sizing, check out our membership program here: / diyhvacguy
For a small monthly fee of $25, you will get assistance from myself when it comes to your hvac needs, whether it's sizing, diagnosing, or locating the correct equipment.
⚠️ Disclaimer:
This video is for educational purposes. Any and all HVAC repair work is done at your own risk. The DIY HVAC Guy channel is not responsible for any possible damages or injuries caused by the use or misuse of the provided information.
The DIY HVAC GUY is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

[@diyhvacguy]

All My Favorite HVAC Tools: www.amazon.com/shop/thediyhvacguy?ref=ac_inf_tb_vh

[@m.g.540]

A dremel is a handy little tool that can save parts with precision use, a neat repair.

[@Nine_883]

A couple real notes about Staybrite 8. I use it often for repairs in commercial refrigeration. First I have seen it get soft and a tube can actually blow out when used on a discharge line. Dirty systems cause high head pressure and high compressor discharge temperatures. I don’t recommend it for compressor discharge lines or any other controls in the discharge line like oil separators, hot gas bypass valves, reverse cycle valves etc… Also check local code because some places do not allow any kind of soft solder on refrigeration lines. They claim it violates fire safety codes because it can melt and blow out refrigerant and oil causing phosgene gas poisoning to first responders and anyone else around. I think it’s more about keeping your average Joe from doing HVAC work with nothing but a simple propane or MAPP gas torch, but that’s a different topic.

[@tombarnes1871]

Good information, I need to get a Dremel tool!!!

[@petersmart1999]

All fun and games with that in a nice vice in a shop,not so out in the field on a ladder!

[@petersmart1999]

@@Jack.333 Its a waste of time ,is what it is!

[@kevinhaley6776]

​@@petersmart1999 remind me not to hire you for a job no parts saved is a waste of time i got more time than money

[@petersmart1999]

@@kevinhaley6776 what parts were saved,none! In this case,you removed a failed fitting to prove it could be done. And the fix was to add a fitting that is either brazed,or soldered!

[@diyhvacguy]

Ok you clearly don’t know what you are talking about. IF AND WHEN one of my press fittings fails, that is crimped to a service valve, I will demonstrate how to do this in the field. But one hasn’t yet, so I wanted to demonstrate how to do this on a free piece of pipe. If you didn’t find it helpful then why did you even watch it? 🤷🏻‍♂️ thanks for making me some dough in Adsense money though 👊🏼

[@petersmart1999]

@@diyhvacguy this is real life jackass,I have been a top service tech for years.I work on everyrhing fron 1,000 ton chillers,large steam boilers,and everthing in between.You fools are taking the proven craft out of the craft itself.I have spent years going to school and training to keep up with technology,some I like and some I dont. I have worked with many over the years that love this easy ,no skill technology.The reason why,it requires no real skill and its easy! Im not saying this stuff has no place at all,nor do I think the old way is wrong nowadays.I just think in a craft that requires alot of skill and alot of training,they need to stop catering to the people that refuse to want to learn and maybe work a little! I tried mega press on a gas line that I installed,I wasnt really impressed,give me my rigid 300 with auto dies and I will get it done as quick. I have giys that use $300 in fitting to install a $150 point of use water heater.Again,im not totally saying its shit and it has a place,but im not a believer that its better,its just easier!

[@kevinhaley6776]

Another great tip i can tell you like the job you do

[@diyhvacguy]

I do! Thanks for the support 🙏🏻

[@mikefuller5174]

Found it. Thank you

[@friendofvinnie]

Your the best thank's man!

[@friendofvinnie]

@@Kevin-mp5of 😂

[@zippythechicken]

would be nice if staybrite came in half pound spools for people that don't use it much... might but i haven't seen it

[@camilo8cheryl]

Looks easy on a work bench..doing in ground level in tight spaces is a different story..try to shoot another video on a ceiling or ground level work..if your getting paid to work, cut all of them leaking pro-press and service valves and install new ones

[@dm19609721]

and if the fitting is close to a wall?

[@kangaroogod]

👍

[@tuvoca825]

Solder is for water/plumbing. Silver brazing is reliable for higher pressures, vibration, etc. Don't use solder on HVAC with 200psi, comoressor heat and vibration, etc. Uae brazing. I use pure silver so it is pretty universal. Al little pricey, but no fail on home appliances (refrigerators).

[@diyhvacguy]

I have several videos showing the proper method for soldering, brazing, and crimping. This isn’t the only way to do it, but people said they’re impossible to get off if they leak and they are wrong.

[@hta506]

Is the soldering strong enough to withstand the vibration and heat of the high side line?

[@antoniofurfaro3105]

Show how to get it off service valve @ replace

[@diyhvacguy]

Will do. Haven’t had one fail so I have none to do it on.. I do have a scrap condenser though 🤔

[@davidmartin9158]

Does this change your thoughts on crimping??

[@diyhvacguy]

My thoughts? Yes, people say you have to cut them off completely but that’s not true. So there is option b if for whatever reason the crimp ever starts leaking

[@tuvoca825]

Nope. Not for HVAC or pros or.... just no. Nice experiment, but not for a pro. Turbulent water through deformed pipes will eventually leak., even if you get it done. Also... that's too slow. Just do it right. It'll save you money in the long run. Thanks for the video though! Good discussions! I hope you take the hit and leave it up. Maybe add a disclaimer and admit you were wrong. 😂 Sorry kid. Not your day on this one but I still appreciate it! ❤

[@diyhvacguy]

Ummmm, this is for refrigerant not “turbulent water” lol and the new refrigerants are flammable so pretty soon this will be the only way. This train is leaving with or without you ✌🏼