How to Remove Gas Tank and Plastics on 2021+ MT07

[@mitchell87ification]

No wasted time of fluff. Clear explainations. Good views. Perfect tutorial... Thank you..

[@relevation0]

Somebody needs to make a larger aftermarket tank for these things, aluminum tank that utilizes the extra space of the plastics would easily get us an extra gallon or more.

[@spiffanator]

I'm super happy that you showed us how to reinstall everything. Most people would have just said "just do the opposite of what you did". And left it at that. Those people didn't count on me being an idiot.

[@BradTheBuilderChannel]

It’s just a lot of work to film everything and people skip it. Thanks for the comment! I really appreciate it

[@MadridistAli7]

lol true

[@explosivefailure]

I've been searching for a tutorial like this. Very detailed and helpful video.

[@BradTheBuilderChannel]

Thanks for the comment! Peace ✌️

[@Lesmc1of3]

I’ve got a 22 model and I’ve been shitting myself thinking about getting a cable to the battery. This very detailed “how to” could be a lifesaver. Thanks man.

[@monawoka97]

Yo this was an absolute lifesaver. I was installing heated grips and I wanted to cleanly hide the wiring under the plastics. Getting the shrouds off made it waaaaaaay easier.

[@BradTheBuilderChannel]

Sick! That’s the whole idea glad you liked it! ✌️

[@ianskeldon6032]

Congratulations mate, very easy and clear instructions, no waffle and background music nice and quiet, I wish more videos were like this.

[@alexandersievewright3842]

Great video had plastics off in 10 mins new keyless gas cap fitted and 5mins to put plastics back on cheers mate

[@primal5435]

Nice video! Have you experienced the middle piece not wanting to sit flush on the tank after having it off? Or have a tip to make it lock in again flush. The dealer told me, that's just how it is, even though it have like a 0.5 cm gap in one side and not the other. I tried everything, nothing seem to make the taps want to lock in properly again :/

[@RuxGaming]

Hey did you solve the issue? I have the same issue

[@primal5435]

@@RuxGaming Got the middle part replaced, then it was fine, intill I took it off, and boom after one time taking it off, it doesnt sit flush again. Horrible panel design. Unfortunantly there seem to be no other solution than replacing the part.

[@RuxGaming]

@@primal5435 Oh! That’s sad.. do you know the part name for the middle plastic piece?

[@primal5435]

@@RuxGaming Yea I agree..No, I got it replaced at my local Yamaha Dealer.

[@Rick-ve5lx]

Great video which was invaluable when fitting the wiring for heated grips. Thanks!

[@ComradeBenedict]

Anyone ever have trouble getting that center black piece back on without any gaps? The snaps on the slanted piece facing towards the rider wont go in all the way on one side and its driving me crazy

[@hawx8902]

Just did mine and I'm experiencing the same thing, it's one little gap on the bottom left of the center plastic that's driving me insane lol

[@primal5435]

YES, very annoying, dealer just told me it was a very common problem, and that after basically one install, it would never sit correct again. I replaced mine, it sat flush after the first install, but after taking it off just once, it didn't sit flush again. Can't believe Yamaha hasn't made proper tolerances.

[@KH-yy6xm]

Reinstall steps saved me, thanks so much

[@cyrillemit1211]

Thank you very much !!! I was wondering how to take of the plastic cover tank without breaking it ! Great

[@davidbarrett2936]

Perfect step by step… You are the man! Thanks so much for this very helpful upload. 👍🏻

[@BradTheBuilderChannel]

You got it! Thanks for the kind words!

[@fastmamajama]

there was a piece missing between the 2 seats. i was having trouble bolting mine back so i put some zip tides. the bike was running rough. i though it needed a tune up but it has mouse food in the air filter.

[@Robocoppat]

how do you remove the side headlight pieces? i see that it has a plastic push pin. However, something keeps it from coming off. any suggestions?

[@g.johntulagan5589]

Great video. No wasted time.

[@vandall0160]

Thanks for the video, one question. I followed your steps for the second time to replace air filter #2 at 12K miles. Went smooth as silk first time, but the second time I removed the tank, rolled it on its side to disconnect the fuel line and pump and 4 black spacers fell on the ground. Have looked at exploded diagrams, been on other forums, and cant get an answer as to where these go? Never had an issue the first time, and own the official shop manual (of course cant find it now that I need it). Curious if you have ever seen these 1/4 inch spacers when working on yours?

[@underworldringside]

Best video on the internet .

[@gregannewest-walker6862]

This video was really useful thanks!

[@ravensallday2222]

The gas gauge is flashing and it won’t start, any reason why?

[@cr0wsky]

Great video, thanks for sharing!

[@Jonesy323]

I lost the push pin on top side and can’t find a replacement anywhere online

[@BradTheBuilderChannel]

Here is the oem website that has what you need for the 2021 mt07. www.yamahapartspro.com/oemparts/a/yam/600ee4ac87a8660140d632f4/fuel-tank-2 Look on the schematic of which one you need and I think they are very cheap. Hope this helps

[@Jonesy323]

@@BradTheBuilderChannel yeah I looked at this but in Australian Yamaha and still on both tank diagrams it doesn’t show that top push pin on it 🤷‍♂️ I’ll prob have to ring Yamaha service parts directly see if they know, thanks bro

[@BradTheBuilderChannel]

@@Jonesy323 and it’s the the same push pin as the other ones? All the pushpins I’ve seen are the same size. Hope you find a replacement man

[@soso_1M]

hey i have a question, can I put the tank cover of the 2021 mt07 on the 2015 one ?

[@LANCEL0T86]

No different style

[@mt_mauri]

Whats that square hole on the front cover of the gas tank close to the bolt?

[@BradTheBuilderChannel]

If I’m thinking of what your talking about correctly it is the nut for the bolt that enters on the other side. The nut is stuck in place so you do not have to hold it with a wrench on the other side.

[@stevensaff]

Anyone know where I can get one of the Phillips push pin things. Lost mine taking it out and can’t find it anywhere 😭

[@BradTheBuilderChannel]

Try searching an OEM parts website or check your local autoparts store. eBay also has a lot of options.

[@underworldringside]

You know what your doing. But YAMAHA didn't with the access design. But manual allows 20.000 km standard part. I will install a high flow and access every 10.000

[@neranjandayananda4712]

Thanks Ledgend 🎉

[@urmitpatel5058]

Thank you buddy.

[@underworldringside]

Bad design to access filter

[@therealrealshocker]

👍

[@TheRealPervySage]

Just needed to know if fuel was going to leak out. Thanks! 2022 R7

[@BradTheBuilderChannel]

You will have some residual fuel in the line that goes to the injectors (very small amount) but you won’t have fuel pouring out from the tank thankfully!