How to Remove Headlight assembly Chrysler Pacifica 2017 and newer

[@patrikj]

Nice. One tip: I did this today and realized that if you put something under the bumper so it doesn't fall down then you can just fold it forward a bit without disconnecting all the connectors and get the headlights out. This is good if you have a hybrid because it means you don't have to disconnect the HV battery.

[@markdavid3316]

Glad you pointed that out because I have a hybrid

[@timallgood5907]

Thank you this really helped. It sucks that auto manufacturers makes it so hard to change a lite bulb!

[@Allan4homes]

Thank you for the detailed step by step instructions. I will replace my headlamp too. I will just have to order it. Thanks again sir!

[@Dr.ChristopherBuelvas]

Thanks for the explanation and detail. Helped a great deal

[@Allan4homes]

Awesome! I’ll try this when I change my left light assembly. Thank you!

[@samaltebaumer1023]

Awesome video. Very detailed and very informative. Thank you for this it helped a ton.

[@Ozzy4555]

This was a really good video. Thank you!

[@RunnerLogan]

Thanks a lot man You really helped out

[@ot5634]

Thank this really helped.

[@richardgrauel299]

Great. Nice job. Thanks

[@dporrasxtremeLS3]

Super Great Video! I have a 2017 Pacifica Limited, and need to replace the daytime running light driver/ballast, if it has one, or replace the headlight assembly. I could not find a video on KZbin with this information. Anyone had this yet happen to them?

[@JimAlfredson]

How did that go? My LED daytime running light is out on the driver side and the dealership wanted $1100 to replace the whole assembly. But I've read that it's probably just the control board, which you can get for $40. Did you have success?

[@ivegonepostal8896]

I bought a headlight control module (the silver square) on eBay for $25. I plan to try to install it soon.

[@Engine201]

Absolutely ridiculous. Takes me 5 minutes to remove and replace both headlight assemblies in my 04 Yukon Denali. What a joke

[@frankshannon3235]

One thing I do is bust all those little tabs off of power connections and so they just pull free. Then I tape them.

[@josemunoz8264]

Do i need to remove the headlight assembly to change the lights?

[@ebennallie]

What the actual f…. lol thanks for the video thou!

[@rudystamm5145]

You did all that to change the lamps. You must be kidding. Open the hood reach in behind lamp housing unscrew the entry to the bulbs remove and replace bulbs

[@zacr1583]

They designed it so you can’t fit your hand behind them to change the bulbs. Great new way to charge everyone ridiculously at the dealership.

[@NYOB0001]

This is for changing the whole assembly, not the individual bulbs.