Bro really said "how to" and his answer was "take it to a tint shop and have them use professional tools"
@jaymosupreme2 ай бұрын
Steamer at Walmart $59.00
@Amirsff Жыл бұрын
I used a steamer, there was still a thin layer of glue on the glass, it was 5 year old bubbled tint. 70% alcohol solution with a microfiber towel wiped it off easily.
@BigALdeek4 ай бұрын
Nobody has or uses a steamer bro.
@Amirsff4 ай бұрын
@@BigALdeek it was a $25 wallpaper remover from marketplace. Really helped to get most of the glue off and my previous tint was bubbling and low quality, wasn’t coming off easily. I think good quality tint might come off easily if you just let the car sit in sun.
@BigALdeek4 ай бұрын
@@Amirsff I agree they are useful but I don’t own one and nobody I know owns a steamer. Luckily I live in Texas it’s very very Hot so maybe 15 mins in the sun 100 degree sun will do it haha I don’t know if the tint is good or bad. I got it from the Dealership like that in Louisiana.
@Amirsff4 ай бұрын
@@BigALdeek definitely, I did it when it was cold. You can also use the black trash bag method with some baking soda solution, that works very well when you just let it sit in Sun. Remaining glue should be easily removable with some multipurpose cleaning solution, I used 70% alcohol.
@sid5417Ай бұрын
I got the same 7 year old brittle tint that left glue residue everywhere. TY for your tips
@rjohnson205 Жыл бұрын
For everyone asking, he’s using a clothes steamer to help it release.
@richcombs48058 ай бұрын
Do NOT use a razor blade. Use Right Off to remove adhesive residue if isopropyl alcohol does not work.
@Champagnepipa11 ай бұрын
Did you avoid damaging the defroster? How?
@SmartAlx Жыл бұрын
So.... how? You said how.
@joletty1793 Жыл бұрын
Steamer 😂😂😂
@luistapia1686 Жыл бұрын
This is for demonstration only, The way to remove the rear glass you will need a steamer and just slowly pull the film.
@mlnags28299 ай бұрын
So we don’t have psychic ability… keep reading…and I found my heat gun in the garage💡🔥🤩
@JeffersonRah8 ай бұрын
So a hair dryer?
@seandiaz5828 Жыл бұрын
Can you show how to do it with damaging the defroster ?
@fast453211 ай бұрын
Razor blade
@MikesManCave10 ай бұрын
Use a razor blade, will damage the defroster every time.
@edible0048 Жыл бұрын
Where's the how?
@joletty1793 Жыл бұрын
Steamer, use a steamer to loosen it up, easy goes, let it soak up steam, heat, pull gently. 😂😂😊
@luistapia1686 Жыл бұрын
This is for demonstration only, The way to remove the rear glass you will need a steamer and just slowly pull the film.
@luistapia1686 Жыл бұрын
@@joletty1793 thanks Jo Letty
@damiantatis9227 ай бұрын
Where you guys located I’m in the Bronx
@corywagner97336 ай бұрын
But what about dry rotten tint that still looks new
@king504gaming510 ай бұрын
Question. So will a regular everyday use home steam work?....Does it have need a certain temperature
@luistapia168610 ай бұрын
Yes, it may take a little longer but it does the job.
@BuyYourBuild8 ай бұрын
Where was the How?
@mikkey246 Жыл бұрын
What's defroster
@luistapia1686 Жыл бұрын
The defroster grids are the skinny lines that run across your rear windshield, and their job is to remove any fog or melt any ice in the winter by generating heat to give your premier visibility. However, a damaged defroster grid can severely affect your visibility and put you in danger.
@stevensteele9648 Жыл бұрын
Wow! That's not old window tent....lol
@michaelcroll7628 Жыл бұрын
I bought a $25 heat gun and did it myself saved $175 if I can do it you can to
@luistapia1686 Жыл бұрын
Congratulation, But if you used a heat gun on the fabric you will burn the fabric. We don't recommend, Our professional advice. Thanks
@Deathwish610 Жыл бұрын
Can this work with a heat gun?
@luistapia1686 Жыл бұрын
No.
@makeupmandeeq Жыл бұрын
Lmao “how to” with no how. Ok.
@H8HotWeather11 ай бұрын
How do you remove old tint that breaks into a million peices on the rear window ?
@luistapia168611 ай бұрын
Hi, if you would like to preserve the defroster line, you will need plastic razor blades plus the steemer. And slowly remove the film.
@waybach8 ай бұрын
Or use tint off with trash bag and lots of sun. No sun? Use4 heat guns for 20 mins
@waybach8 ай бұрын
@@luistapia1686 what's your method of getting film behind a brake light that doesn't come out?
@luistapia16868 ай бұрын
@@waybach REMOVE THE PLASTIC PANELS
@OCMOOMOMO4 ай бұрын
Lame. No instructions .
@lordcira02762 жыл бұрын
how do you deal with any leftover adhesive?
@shansh982 жыл бұрын
When using a steamer there usually isn’t any left over
@Sebastian-di1xj Жыл бұрын
My guess would be like soapy water or sum
@luistapia1686 Жыл бұрын
Hi, There is no adhesive leftover when you used the steamer
@yabd792 Жыл бұрын
Pray for the defroster
@taniamillerart Жыл бұрын
But if you still have some residual use window cleaner spray and scrape it while is moist with a razor blade. It will come easily
@captainseadog760011 ай бұрын
Do you use steamer outside or inside rear window?
@luistapia168611 ай бұрын
It clearly shows that we are using the steamer inside.
@Itsargentinarenee Жыл бұрын
Instructions
@chillykisses65746 ай бұрын
Rename this video please🙄
@goldwolf06067 ай бұрын
Why don’t stupid window tinters put the rear window tint on the outside?!? Would make life a lot easier for everyone.
@luistapia16867 ай бұрын
HAHAHAHA. The film doesn't go outside. you will have to change window tinting every year.
@moonmullen9992 Жыл бұрын
Thanks for nothing
@luistapia1686 Жыл бұрын
This is for demonstration only, The way to remove the rear glass you will need a steamer and just slowly pull the film.