How to REMOVE ORANGE PEEL without wet sanding

  Рет қаралды 252,357

Speedokote refinish network

Speedokote refinish network

Күн бұрын

Пікірлер: 231
@itsturbinetime
@itsturbinetime 10 ай бұрын
I was the one that recommended the denim pad, and I was so excited to see you make a video on it, that I had my wife come in and watch it too lol we even made grilled cheese sandwiches for the occasion.
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
Yes I remember! Feel special sir I literally bought those pads 20 min after your comment!
@chrisglanzer4383
@chrisglanzer4383 7 ай бұрын
Do you have a link to the pad you used/used in this video?
@Hondo-kj8hi
@Hondo-kj8hi 7 ай бұрын
@itsturbinetime Knowing is Half the Battle. The other half is lasers, lots of lasers! Haha.
@scottmoto
@scottmoto 6 ай бұрын
You learned it from Kandy Man perhaps. He's been using them and promoting them a long time. Not sure why you just had to make sure you got the credit for it.
@ejusdem_generis
@ejusdem_generis Ай бұрын
Sandwiches! That’s so cute.
@seanfalter9903
@seanfalter9903 10 ай бұрын
#1 paint channel on KZbin, just because it’s the most down to earth, practical, with real world solutions! You will not come across another professional that will always think out of the box and possess the skills and knowledge to get real world results no matter the situation, a professional in any trade can have different tools, supplies,etc….thrown at them and they know how to deliver a great result, I think I can speak for everyone in your community, awesome job and keep them coming, the shorts too!😂👍💪
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
I really appreciate you my friend. We will keep fighting the good fight.
@jordangraham2942
@jordangraham2942 7 ай бұрын
This guy and paint society are awesome.
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 7 ай бұрын
Thank you !!!
@johnnyroastbeef84
@johnnyroastbeef84 9 ай бұрын
Sir. 1)Try a mixture of isopropyl alcohol and distilled h2o to clean the surface. 2) Prime your pad with 5 dime sized dabs of polish and before turning on the machine rub the pad on the area you are about to work on. Priming the pad keeps the machine from jumping and so does keeping your hand on top of the machine above the pad. Work in a roughly 2’x2’ area using a cross hatch type pattern slightly overlapping each pass. *Do not squirt polish all over the place-you wasted a lot of polish As far as ceramic coatings some can make a mess out of a perfectly polished and prepped vehicle and actually need sanded off to start all over wasting time and money. Having three high quality different color microfibers is a great way to keep track of what order they are used in order to remove the excess ceramic, buff the area, then rebuff the area extending a bit past the 2’x2’ area you are working on while ceramic coating the vehicle
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 9 ай бұрын
Appreciate the tips!
@clintonmaurer5758
@clintonmaurer5758 10 ай бұрын
I stared using them 6 months or so ago and I wish I had them 20 years ago also !!!! We use them all the time esp for collision work. Makes denibbing way faster now
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
Yup!
@SteamTrain2639
@SteamTrain2639 9 ай бұрын
Do you only use a DA for this? How about a rotary?
@allanmen5236
@allanmen5236 10 ай бұрын
ive used the denim pad on a rotary and it works very well , backed up with a polish on a da machine
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
Good idea
@bm_wuratli6883
@bm_wuratli6883 8 ай бұрын
U put a directly denim pad with an abrasive product on it?
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 8 ай бұрын
@@bm_wuratli6883 compound
@3rekoatskustoms929
@3rekoatskustoms929 10 ай бұрын
I tried that pad a while ago and haven't used it since, but land to there is also a orange pad made of Corduroy .
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
It's good to use on flat surfaces I wouldn't use it over any edges
@stephenlouden480
@stephenlouden480 8 ай бұрын
been using denim for polishing and directing a while now. you never see any of the top pros on KZbin using it ever. the ones that do just know how great it is
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 8 ай бұрын
It's a dang good pad !
@scottmoto
@scottmoto 6 ай бұрын
Actually some do have been for a long time.
@bulldoggarageapparel7511
@bulldoggarageapparel7511 2 ай бұрын
I tried one one but it did nothing at all even on a fresh cheap single stage paint, I did the whole right side of the car zero I mean zero orange pill or any dirt did it remove and zero differences in the shine or anything I was hoping for some different but nothing happen, so wet sand and buff with the great wool pad and now it looks great, and again I was hoping for some different but I got zero results not even any paint was on the pad and again it was a one week old single stage paint job, however I'm glad it worked for you and maybe on clear-coat it will preform thanks for the videos I do enjoy them maybe if you could do some more older cars would be great have a nice day
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 2 ай бұрын
These can be hit or miss depending on the brand. I got one in the mail recently and it SUCKED !!!!!
@damensutherland7081
@damensutherland7081 8 ай бұрын
I just pqinted a bicycle with speedokote color blender .i put epoxy color pigment in it and it came out opaque and for a beginner i would now say that epoxy pigment and pearl takes some skill.i have been touching spots up about three diffrent times after cleaning gun thinking i was done
@rogerchristeson
@rogerchristeson 2 ай бұрын
I enjoy your content because you represent the average DIY guy who doesnt want to spend a fortune. I also follow paint society. Ive learned alot from you and Brian
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 2 ай бұрын
@@rogerchristeson thanks man !
@rogerchristeson
@rogerchristeson 2 ай бұрын
@@speedokoterefinishnetwork4937 I forgot to mention, I seen you're video a few months back of the speedokote headlight kit. I bought a kit on the spot. Finally pulled it out the box and tried it out. Came out awesome and is holding up well after a couple washes. Made a huge run and redone one of them. Very happy with the results overall
@jasonlapres9838
@jasonlapres9838 Ай бұрын
I had the TL back in the day, same colorish from factory
@joeschmoe6908
@joeschmoe6908 10 ай бұрын
I've tried denim, and it works. The problem I had was the edges beginning to fray slightly and become twisted causing them to be bigher than the face of the pad. Since the pad is not flexible that caused pigtails. Perhaps the rotary version of the pad would not have this problem since it's softer and the material wraps around the top of pad with no exposed edge.
@mashedpotatoes77
@mashedpotatoes77 7 ай бұрын
Osren also produces their own abrasive called NAO Compound 56 that is specifically designed to be used on orange peel levelling jobs paired with their denim pad. With how well this job turned out, I'm sure it could turn out even better when paired with that compound.
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 7 ай бұрын
Yea wasn't trying to get it perfect. Just a beater car
@hydroltd6148
@hydroltd6148 2 ай бұрын
Ahhhhhhh! So I am not crazy I really did polish through my clear coat! haha! I just fixed rear fenders on my 05 elantra, the repair finished better than expected, the paint had peel so I followed the 1500 and 2000, it looks amazing wet with wax, but I have to re apply some clear coat for sure as there is some left to touch but you can tell it's gotten too thin.
@sheldongilbert808
@sheldongilbert808 10 ай бұрын
You can also get them at harbor freight 2000 3000 4000 and then get 8000 3M trizak to finish .it will leave a awesome showcar finish.
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
Yup!
@varrient9959
@varrient9959 8 ай бұрын
I’m having trouble locating them at harbor freight
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 8 ай бұрын
@@varrient9959 Amazon
@erikgolden1297
@erikgolden1297 2 ай бұрын
Are those considered the yellow green white polishing pads ?
@sheldongilbert808
@sheldongilbert808 Ай бұрын
@@varrient9959 they are in the 6" round sanding disc's area they will say 2000. 3-4. It's close those film sanding discs
@Shinji-wu1ny
@Shinji-wu1ny 6 ай бұрын
Do you put a new clear coat on it after buffing out the orange peel? Do you do this step before you paint on a layer of clearcoat?
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 6 ай бұрын
The buffing and polishing is the final step in the process. If I was to re clear coat it that would be called a flow coat
@MrC9Oh3
@MrC9Oh3 8 ай бұрын
I learned from the best. I dont even have buffing or wet sanding materials in my shop.
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 8 ай бұрын
I almost never wet sand or buff . But it is the cherry on top for some jobs
@Chris_Paul1
@Chris_Paul1 10 ай бұрын
With how many people paint their cars with rustoleum turbo paint, would u make a vid to try get the best finish possible out of it, like paint, cut and buff on a spare panel if u have one laying around.
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
I've pretty much stopped Rustoleum painting simply being it's actually more expensive than some car paint now
@tonygibbons5
@tonygibbons5 7 ай бұрын
​@@speedokoterefinishnetwork4937 😮
@robertwramirez287
@robertwramirez287 10 ай бұрын
What's the name of the denim pad you used? Awesome video.
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
Sorry man got off Amazon impulse purchase 🤣🤣🤣 if you go on amazon and type in denim buffing pad a bunch come up 🙂
@johnwalters878
@johnwalters878 9 ай бұрын
Carpro is one of the original manufacturer’s of the denim pad.
@michaelbaskinmichael9862
@michaelbaskinmichael9862 2 ай бұрын
I have a tall truck to paint and hard to reach top but I hen I do overspray gets on everything how to control overspray
@joshuawormington2880
@joshuawormington2880 10 ай бұрын
That Acura looks good and so does the 3000gt! I’m about to buy some speedokote supplies, you got a good discount code for me?
@joblo2299
@joblo2299 10 ай бұрын
Im suprized.. flat and glossy..i use rotary with the farecla mop and 360 compound.works fast..but can ruin clearcoat fast too..ima look into denim..thx for video❤❤
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
No issue!
@rorykurtz990
@rorykurtz990 2 ай бұрын
This looks like a great orange peel solution. Would this remove small nibs while smoothing out the orange peel at the same time? Or would small nibs need to be wet sanded first?
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 2 ай бұрын
I would sand out the nibs first cause that polisher will just drag the nibs all along the surface potentially turning it into 80 grit sandpaper 😬😬😬😬
@Ovury
@Ovury 10 ай бұрын
where is the link to buy
@shrmtales
@shrmtales 7 ай бұрын
Really they been out and about for a long time i only use them to tone down and not to fully remove it. Best way in my opinion will be a combo of wet and dry sanding depending the clear
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 7 ай бұрын
True !
@irecruitfish7410
@irecruitfish7410 3 ай бұрын
I wish I knew about this earlier I just finished doing heavy compound mid-cut polish and then finishing glaze and now I was going to use ceramic coat spray. Oh I forgot I also did clay bar so anyways I spend all these hours only to see that the paint is showing more orange peel. Do you think I should just go back and spray it down with some isoprol alcohol and then try the denim pad? I used Menzerna heavy cut 400 with a purple wool pad. Still have orange peel.
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 3 ай бұрын
This stuff is a quick fix for light orange peel. It worked surprisingly good
@irecruitfish7410
@irecruitfish7410 3 ай бұрын
@@speedokoterefinishnetwork4937 I believe I do have light orange peel. The reflection is just not as crisp as for example of my other car which is like a mirror reflection. So do you think I should use the denim pad with my Menzerna 400 or should I use the 2500 which is a mid-cut?
@xpacmaner23
@xpacmaner23 6 ай бұрын
which do you prefer wet sanding or denim pad orange peel removal?
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 6 ай бұрын
Meehh denim pad was slightly easier .... But to really flatten out a surface properly you need a straight block and some wet sand paper
@Alexautopaintglasscoatings
@Alexautopaintglasscoatings 3 ай бұрын
I’ve been starting to use them on my cars, definitely life changing!! A true miracle lol
@normandothegreat
@normandothegreat 7 ай бұрын
Awesome! Do you ever use Klasse in the red bottle? That stuff is worth its weight in gold!
@rarespetrusamartean5433
@rarespetrusamartean5433 3 ай бұрын
But, if that pad is doing a similar job to the sanding...isn't that removing just as much material from the clear coat? How is it any better for the clear coat layer?
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 3 ай бұрын
Yea you have to be careful.
@kandyman5315
@kandyman5315 10 ай бұрын
Should check out my 3 denim pad set
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
I'm guna play around with them a little more but so far I like them
@carsrcool7149
@carsrcool7149 10 ай бұрын
Hey trigger...i get around too...Jay Fox aka CarsRcool
@budgetwheeler4x4
@budgetwheeler4x4 5 ай бұрын
Do you want to do a repaint and rust repair on economic truck 06 chevy 1500 single cab short bed 8in drop. It's gm black.thanks great vids
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 5 ай бұрын
Unfortunately we don't get into these kinds projects anymore because almost 90% of people have no idea what stuff like this costs. It's very expensive.
@Proven88
@Proven88 6 ай бұрын
Come on, man, at least clean the right side of all the dust before showing a comparison. The right side could look pristine, but you wouldn't be able to tell with all of the debris on it
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 6 ай бұрын
Thanks for your opinion. You have helped us all
@michaelciullo4788
@michaelciullo4788 6 ай бұрын
Do you think this will work with single stage paint?
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 6 ай бұрын
Any 2 part urethane paint most likely
@peter-m2x
@peter-m2x 7 ай бұрын
looks like you have some tiger striping in your base coat color. do you spray with an x pattern when you spray metallics or pearls? also aeropro a610 spray gun will lay clear way better and it's a cheap dyi gun for really cheap and you can toss it when it wears out.
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 7 ай бұрын
There was not any tiger strips in base , could be lighting cause it was cross hatched multiple times
@mikefisher2930
@mikefisher2930 3 ай бұрын
CaN you use this on single stage no clear. If yes how long does ss have to set up
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 3 ай бұрын
Yes
@lieberfreialsgleich
@lieberfreialsgleich 8 ай бұрын
I don‘t See a denim pad in your shop. Is it the wool pad, 9“?
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 8 ай бұрын
I'm using the denim pad in the video
@fredc8618
@fredc8618 10 ай бұрын
Would it be a good alternative to color sanding a freshly painted single stage black? Speedokote of course😊
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
If your not skilled with wet sanding absolutely
@fredc8618
@fredc8618 10 ай бұрын
Whats the link to the one you bought?
@Joeshomegarage
@Joeshomegarage 10 ай бұрын
I think they bought them all. The only Osren denim pad I can find on Amazon is $36 with 1 6.5" pad and the polish they sell. The other brands all have like 2 stars🤷🏼‍♂️
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
I'll have to go back and look I bought off impulse I just clicked a button not much attention 😂
@christianhadaway6144
@christianhadaway6144 4 ай бұрын
Where do the denim pads come from?
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 4 ай бұрын
Amazon . General Google search will show you a bunch of sources
@____MC____
@____MC____ 10 ай бұрын
Do you think 1.3 is too small of a tip for single stage in ~60°f weather?
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
1.3 is fine. Summer time can bump it up to 1.4
@krisf29
@krisf29 10 ай бұрын
Can you use that pad on a junk panel to see how quick it will burn through the clear
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
Sure!
@j.morales3166
@j.morales3166 2 ай бұрын
I have a denim pad coming today because I have to try this now 🙂
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 2 ай бұрын
Best of luck !
@SamFBM
@SamFBM 9 ай бұрын
wow didnt know those existed. how long do the pads last? can you wash/clean them?
@SamFBM
@SamFBM 9 ай бұрын
also idk if you can get this polish in the states, menzerna heavy cut compound 300 and 400. works really well to get 2k scratches out and also gives it a factory gloss at the same time. they also have a 3 in 1 , cut ,polish and wax. granted doesnt cut that much but can bring the old stuff back to life in 1 product. German brand sold a lot in Europe and uk.
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 9 ай бұрын
I'm pretty sure you can wash them. Not sure on durability being I only used once 😎
@ianthomas5852
@ianthomas5852 10 ай бұрын
Kandyman used that pad sometime last year.
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
Yea he also has a good video on them
@JohnWD40TC02
@JohnWD40TC02 10 ай бұрын
Thanks for sharing this with us Marco, I haven't used these denim pads but I have seen the Kandy Man use them on one of his cars and was rather impressed but it was better to see you use it on a real world DIY paint job with a small compressor compared to him using them on a state of the art booth spray job🙏👍John UK
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
Yea first time use I like it
@matthewgibb2640
@matthewgibb2640 5 ай бұрын
I started using these in 2010. The asians have been doing it way longer than that. Sanding is still better as denim round's it off, sanding slices through it and theres no heat. But denim has a place for sure. Reelmasters retro room is where my peel removal videos from back then are
@mundanestuff
@mundanestuff 6 ай бұрын
Ill gave to give this a try. My Austin Healey Sprite is more orange peel than not.
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 6 ай бұрын
Worked pretty well for me
@lodollar23
@lodollar23 2 ай бұрын
I want to see a step by step tutorial on this. I'm horrid at cut and buff
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 2 ай бұрын
@@lodollar23 we already have this Scroll back a few videos
@SIPRising33
@SIPRising33 4 ай бұрын
One time when taking out fisheye, i forgot to put a pad and used the buffer. Basically hitting it the velcro 😅 oddly enough it knocked the fish eye immediately out without burning thru. When i realized, i put the pad on, but the area that i hit with velcro looked the best lol. More studies oughta be done lol
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 4 ай бұрын
🤣🤣🤣🤣🤣🤣🤣
@SIPRising33
@SIPRising33 4 ай бұрын
@speedokoterefinishnetwork4937 try it and tell me I was trippin lol I was contemplating taking the pad off again the whole time 🤣 ( it was 1000 grit, took forever lol)
@tomjohnson1110
@tomjohnson1110 6 ай бұрын
This would cut down time if, after you did this you lightly wet sand then buff. Don't you think?.
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 6 ай бұрын
Not sure haven't tried this
@suspensefulness
@suspensefulness 7 ай бұрын
did u wait a week before u denim cut and buff?
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 7 ай бұрын
Yea I always give the clear plenty of time to harden up and dry
@shakengandulf
@shakengandulf 3 ай бұрын
Awesome video. Could easily watch and listen to you do this.
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 3 ай бұрын
Thanks !
@Joeshomegarage
@Joeshomegarage 10 ай бұрын
You didn't post a link to the pad you bought. The ones I'm seeing have like 2 stars😂
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
Amazon lol
@mazdaholic323
@mazdaholic323 10 ай бұрын
@@speedokoterefinishnetwork4937 the osren denim doesnt show up on amazon only their velvet. Carpro are the ones on amazon currently and they have bad reviews.
@PeteyMcSavage
@PeteyMcSavage 10 ай бұрын
Looks like good cut but it’s throwing some dust maybe mix some polish u used in step two might help
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
The speedokote finishing compound we sell is super cheap at only 20 bucks a bottle but does throw some dust. The speedokote select line is better
@MISSY4EVR
@MISSY4EVR 2 ай бұрын
Will this work on base coat
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 2 ай бұрын
@@MISSY4EVR basecoat clear coat system yes
@MISSY4EVR
@MISSY4EVR 2 ай бұрын
@@speedokoterefinishnetwork4937 you can’t put polish on before clear coat
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 2 ай бұрын
@@MISSY4EVR I have never in my life herd anyone polishing basecoat before applying clear coat . This would lead to adhesion issues with the clear coat as it would not stick to the basecoat
@seanstewart285
@seanstewart285 8 ай бұрын
Nice. The instant you started talking (by saying “total”), I KNEW you were from Pittsburgh.
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 8 ай бұрын
🤣🤣🤣
@DC-si8xw
@DC-si8xw 5 ай бұрын
thanks for posting, I noticed you are going in straight lines during the polishing stage. Is that intentional? instead of a cross pattern. thank you for your input and for posting
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 5 ай бұрын
@@DC-si8xw meehh I mix it up sometimes It is a good idea to cross hatch your patterns in my opinion
@ryanl8653
@ryanl8653 9 ай бұрын
Those pads are made to be used with a rotary.
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 9 ай бұрын
It actually worked surprising good with a random orbital
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 9 ай бұрын
But I'm sure much better with rotsry
@walterharp1773
@walterharp1773 2 ай бұрын
However you have removed the Clear for UV protection..
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 2 ай бұрын
@@walterharp1773 at two nice wet coats of clear , if your only doing buffing this will be ok... If doing a full wet sand and polish then you would need 3-4 coats of clear to keep UV protection
@ripplesempire
@ripplesempire 2 ай бұрын
Did it remove the nibs?
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 2 ай бұрын
@@ripplesempire it helps yes
@robertdiehl9003
@robertdiehl9003 10 ай бұрын
Fantastic job and beautiful explanation of the process & products....
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
Absolutely
@ericricks5758
@ericricks5758 10 ай бұрын
(within the first 0:12 seconds of video, my brain goes) "Bro, are you wearing a garage door clicker?"
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
Yes 🤣🤣🤣🤣
@fredc8618
@fredc8618 10 ай бұрын
AMAZING CONTENT BROTHER!!!!
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
Thanks!
@fredc8618
@fredc8618 10 ай бұрын
Love you bro​@@speedokoterefinishnetwork4937
@tonyestvik7969
@tonyestvik7969 10 ай бұрын
Marco, let say I done my car like you showed... after say 2-3 weeks CAN I BUFF THE CAR, and after go over the car with alcoholic cleaner, AND AD LESTS SAY 2 COSTS OF CLEAR ON TOP? I KNOW, its not the way your doing it.....but lets say I was thinking that if the 2 coats should have laid a little bit better, i have been sadisfaiyd to put it in a show down....but it went as you said 3-5 feet away OK, but not for show.... I do the steps your done, looking much better, CAN I SPRAY MY CAR AGAIN WITH CLEAR AFTER DOING A TOTAL WIPE DOWN ON THE CAR, WITH EVERYTHING YOU DO, BEFORE YOU NORMALY DO BEFORE PAINT? And its right at this moment, those panel parts can come in, as tryout panels- experimental panels- so you dont have to f u c k u p a hole car..... Nicely done, fun to try new things! Good job!
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
To re clear have to re sand unfortunately
@hobbyautobodyfun9315
@hobbyautobodyfun9315 10 ай бұрын
Need me some of them Levi’s jeans pads
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
Yes 😂
@muasboy
@muasboy 6 ай бұрын
Are you the owner of Speedokote?
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 6 ай бұрын
Nope
@vangsta17
@vangsta17 7 ай бұрын
i never had success with these denim pads and if it did work, its not like good old wetsanding.
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 7 ай бұрын
This was first time me using one so total dumbo here , I had good luck
@boosted2.4_sky
@boosted2.4_sky 7 ай бұрын
5:32.. don't mock my certification.. I paid $14 and 4 hrs of MY LIFE BRO... 😅
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 7 ай бұрын
🤣
@jchavins
@jchavins Ай бұрын
if you have orange peel that you can see then skip this pad and use sandpaper.....there's a reason they sell fine grit sandpaper. I bought two of these denim pads.....waste of money....they get real hot before they level it
@leeclement7716
@leeclement7716 7 ай бұрын
That's impressive for having no wet sanding done
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 7 ай бұрын
Yea I was happy
@KenChambers-v2x
@KenChambers-v2x 4 ай бұрын
Next time cleaning the bad side off would help us see better. Not a lot of difference
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 4 ай бұрын
I was holding the camera 1 inch away from the paint which shows one side has significantly less orange peel. At least I'm pretty sure it did .
@KenChambers-v2x
@KenChambers-v2x 4 ай бұрын
Oh I see now. Thanks for the reply
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 4 ай бұрын
@@KenChambers-v2x no worries. I really try to get the best comparison on camera as possible it's hard to see . The point of the video was not to compare gloss between two sides it was to compare the orange peel
@jasonchristen3858
@jasonchristen3858 7 ай бұрын
Just smashed out my first paintjob with single stage white and it has some orange peel, will this method work on single stage paint?
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 7 ай бұрын
Depending on how many coats you have on
@jasonchristen3858
@jasonchristen3858 7 ай бұрын
@@speedokoterefinishnetwork4937 3 total; 1 coat light, 2 medium/heavy.
@jasonchristen3858
@jasonchristen3858 7 ай бұрын
@@speedokoterefinishnetwork4937 Got the typical 3 coats, 1 light, 2 medium/heavy.
@413x398
@413x398 10 ай бұрын
You missed a perfect low-level joke by not wearing DENIM shorts while using a DENIM buffing pad. Tsk Tsk. I tell ya what; you teach me how to paint and I'll teach you how to be a buffoon at a moment's notice. I have over 50 years experience!! I am the hit of my not-so-active senior retirement community!! Hurry and sign up for this limited time offer!!
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
True!!! 🤣🤣🤣🤣🤣🤣
@richardhodge5401
@richardhodge5401 10 ай бұрын
Great vid, thanks.
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
😎😎
@____MC____
@____MC____ 10 ай бұрын
Here i am trying to get my orange peel that good.
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
Haha just takes practice
@____MC____
@____MC____ 10 ай бұрын
@speedokoterefinishnetwork4937 i started with the fluid wide open and was using the pressure range on the can. Well i just read today that if the droplets are big, then you need to turn the fluid down. I turned the air up to 15psi from 10 and went on much better. Now i just gotta repaint everything.
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
@@____MC____ yup always set up test panel if you can
@jimfeaster4837
@jimfeaster4837 10 ай бұрын
Yeah good video😊
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
Absolutely!
@Denman500.
@Denman500. 6 ай бұрын
Wow cool Idea.
@angelmorales220
@angelmorales220 10 ай бұрын
Nice video
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
Thanks bud!
@stevepeters3032
@stevepeters3032 3 ай бұрын
I wonder who the genius was that tried his ripped denim jeans back in the day, to discover this lol.
@Pmc987
@Pmc987 7 ай бұрын
Looked more like it was dry spray rather than orange peel
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 7 ай бұрын
Yea for sure right on the edge of the hood .
@Pmc987
@Pmc987 7 ай бұрын
@@speedokoterefinishnetwork4937 did you spray it flat or hang it?
@Joeshomegarage
@Joeshomegarage 10 ай бұрын
I want that car perfect before I pick it up 😂😂😂
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
🤣🤣🤣
@debcolbert3543
@debcolbert3543 10 ай бұрын
Nice!
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
😎😎😎😎😎🥰
@shanewilliams1216
@shanewilliams1216 9 ай бұрын
thats not orange peal, that looks like you missed an overlap pass or 2 to me , from the lighting it looks like a dry edge . It also looks like you have some fish eyes you were trying to burry them and didn't coat the whole hood . 😉😉😉
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 9 ай бұрын
It's actually due to inconsistency in air pressure as I have explained in many videos. Buy this compressor, attempt to paint an entire car with it, video the results. If you do a better job than me I'll send you a mark1 shine pack on the house no cost
@shanewilliams1216
@shanewilliams1216 9 ай бұрын
@@speedokoterefinishnetwork4937 OH ok, Yea not having the VOLUME of AIR to push a paint gun is crucial . Have you tried using the Iwata LPH400 , which is low volume low pressure gun?
@paulbanks9408
@paulbanks9408 6 ай бұрын
Why does it need doing new cars don't.Just bad spraying.
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 6 ай бұрын
Let's see you do a better paint job. Any pics of your work?
@5jjt
@5jjt 7 ай бұрын
Leave your orange peel alone if you plan on keeping the car because, in time, pores so tiney that you can't see will increase exponentially and youll grow rust from beneath the paint. Your paint will look like as if you painted over rust when it gets bad. Some of that iron-x you spray will actually go down to the bare metal, and not all of it is surface iron that ironx is dealing with. I know it sounds a bit irrational, but I've lived the experience with my own vehicle. I have rust growing beneath perfectly fine looking paint everywhere I messed with the orange peel, and no rust everywhere i left the paint alone. And, yes, where the rust is growing still has clear coat. I also utilize a paint thickness guage.
@jamessakimae9655
@jamessakimae9655 7 ай бұрын
Rust has absolutely nothing to do with sanding orange peel
@philf4086
@philf4086 7 ай бұрын
Brake fluid. Brake fluid will remove your orange peel.
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 7 ай бұрын
Good joke
@purhtronpurhtron3837
@purhtronpurhtron3837 9 ай бұрын
ABSOLUTELY WRONG!!!!, YOU CAN WET SAND AND BUFF 2 COATS OF CLEAR. What do you think you're doing with this pad
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 9 ай бұрын
Your more than welcome to do that in your shop. Not doing it in mine We all have personal preferences in this trade End of discussion.
@scottdonna2690
@scottdonna2690 2 ай бұрын
put that cord over your shoulder stop it rubbing up the panels
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 2 ай бұрын
@@scottdonna2690 true
@Stan-rj8ki
@Stan-rj8ki 7 ай бұрын
Nice vid. You're Philly accent is THICK 😂
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 7 ай бұрын
I'm not even from Philly idk how that happened 🤣🤣🤣
@bettyg7710
@bettyg7710 9 ай бұрын
W.r.t. you want to do a comparison when one side the buffed side is perfectly washed and clean and the other side has particle of etching from buffing the other side on it. Great comparison! NOT!
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 9 ай бұрын
I'm very sorry you were dissatisfied. How can I make you feel warm and bubbly on the inside?
@bettyg7710
@bettyg7710 9 ай бұрын
@speedokoterefinishnetwork4937 do a proper comparison, clean both sides, and then show the difference. Condescending Ass.
@diverdave4056
@diverdave4056 9 ай бұрын
come on now ! you wet sanded the paint with a Denim pad
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 9 ай бұрын
No water man lol Literally just the denim pad, compound, and polish
@diverdave4056
@diverdave4056 9 ай бұрын
@@speedokoterefinishnetwork4937 that wasn't a dry compound or polish !
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 9 ай бұрын
@@diverdave4056 why are you so mad? 🤣🤣🤣🤣🤣
@forestnfren8146
@forestnfren8146 7 ай бұрын
IM SORTIFIED
@blakewilkerson9695
@blakewilkerson9695 3 ай бұрын
I love your channel but them shorts gotta be changes boss man…
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 3 ай бұрын
@@blakewilkerson9695 🤣🤣 hoochie daddy shorts man. There comfortable
@blakewilkerson9695
@blakewilkerson9695 3 ай бұрын
@@speedokoterefinishnetwork4937 lmao 🤣 do you brotha!
@mikeseguin-g6p
@mikeseguin-g6p 7 ай бұрын
advertising much!!
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 7 ай бұрын
A little bit yes . But I'm here to show you guys diy videos and help . Iv been on KZbin for half a decade and after supplies , costs , overhead, iv made no money.
@byteme9718
@byteme9718 3 ай бұрын
Rubbish! Only sanding removes gun texture.
@acevedohiram
@acevedohiram 10 ай бұрын
Let's goooooooo
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 10 ай бұрын
😎😎😎
@ceejay777-u6p
@ceejay777-u6p 7 ай бұрын
you can wetsand and polish 2 coats of lacquer
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 7 ай бұрын
Do what you want to your car . It's a free world
@ceejay777-u6p
@ceejay777-u6p 7 ай бұрын
@@speedokoterefinishnetwork4937 just saying you mention you cant wetsand 2 coats but can lol
@speedokoterefinishnetwork4937
@speedokoterefinishnetwork4937 7 ай бұрын
@@ceejay777-u6p oh you can But there's consequences for running the clear coat that thin after sanding it. But go ahead
@ceejay777-u6p
@ceejay777-u6p 7 ай бұрын
@@speedokoterefinishnetwork4937 best way is clearcoat light then base over clearcoat the clearcoat again very thick wetsand 4 times dry and then get buffer on it but on a da, also be carefull you dont buff through clear, i always wet sand with 240 first then all way to 3000
@exil3dlivecom
@exil3dlivecom 5 ай бұрын
What denin pad do you use? Got a Amazon link?
When to Polish vs Compound vs Wetsand
19:08
AMMO NYC
Рет қаралды 4,6 МЛН
How To Get Rid of Orange Peel Without Sanding
11:01
Kandy Man
Рет қаралды 336 М.
Don’t Choose The Wrong Box 😱
00:41
Topper Guild
Рет қаралды 62 МЛН
Mom Hack for Cooking Solo with a Little One! 🍳👶
00:15
5-Minute Crafts HOUSE
Рет қаралды 23 МЛН
人是不能做到吗?#火影忍者 #家人  #佐助
00:20
火影忍者一家
Рет қаралды 20 МЛН
How to Wet Sand Orange Peel in Car Paint: Porsche 911
12:50
AMMO NYC
Рет қаралды 715 М.
Sanding a $200,000+ Bentley - Correcting Paint Defects Like a Master
1:02:39
Lake Country Manufacturing
Рет қаралды 206 М.
Remove Orange Peels (Step-by-Step) use Dry Sanding
8:46
Amd detailing
Рет қаралды 466 М.
How to Mirror Finish a BAD Paint job
24:07
CVR POV
Рет қаралды 223 М.
HOW TO FIX ORANGE PEEL PAINT
17:24
Auto Repair Guys
Рет қаралды 425 М.
How To Get Rid of Orange Peel Fast & Safe - WITHOUT Sanding
12:58
How To Wetsand And Buff A Bad Paint Job
5:15
Madden Madness
Рет қаралды 121 М.
How to Repair Clear Coat Fix 100% all types
6:05
Mad4Motors
Рет қаралды 12 МЛН