How to remove/replace a dodge ram 1500 4.7l engine

[@creamy2017]

The absolute #1 engine removal video I've seen on youtube. I have a 2000 dakota 4.7, picked it up for 650 in need of an engine and I didn't know where to even start. I'm pretty mechanically inclined, I do mobile mechanic work in the summer as a side job so I know the odds and ins somewhat well, but I ain't NEVER pulled no motor. However the way I've thought myself over the years is just by biting off wayy more than I can chew, and make myself figure it out (be it through youtube, forums, haynes, etc.) Well I've absolutely never had the balls to pull an engine and every other time I was faced with the need to replace one I just opted to sell the vehicle. Like a Pu**y. Well I saw the ad for the dodge and couldn't pass it up, started scouring the internet for how to's and just like every other time i need to learn something... And every other time its crappy videos with lots of time lapses from far away angles and very little interruption for small details or even big details. Your video is not that. This is the most detailed, in depth, down and dirty, shove that camera in there to get the bolt in the frame, just all around, end to end bad ass engine pull video on youtube. Amazing job. I request the highest of fives from you good sir. And from the bottom of my heart thank you for spending the time to make the video so idiots like me can get good deals on trucks

[@s33therfan]

I really appreciate it , I believe feedback like this will help to get this video out there. Again thank you

[@creamy2017]

@@s33therfan I'll share it brother. This video would help anyone pulling an engine in any vehicle. Can't thank you enough but I can share it! Keep it up brother hell yeah.

[@ciprianobravo742]

i do have 01 4.7 engine assembly

[@ciprianobravo742]

i do have 4.7 for sale

[@jackcaselli6185]

you are so easy to understand. you saved me from suicide

[@s33therfan]

Glad the video helped , thank you for watching.

[@fettieteam2333]

This man swap out an engine with ONE HAND FILMING HIMSELF ALL WHILE Explaining STEP BY STEP FOR DUMMIES LIKE ME !! 😂 😂 GOTDAMN BEAST!!! Good job 👏 subscribed!!

[@s33therfan]

Thank you for the great feedback and sub. Thanks for watching.

[@rca3600]

my truck has been sitting for about a year now, saw this video a couple months back and decided that I CAN do it. my new engine finally arrived, installing it this weekend! Thanks for the amazing video!!

[@s33therfan]

Amazing feedback , I truly appreciate that my video could help someone else out. Thank you for watching

[@killerbeau95]

wat happened?

[@pyrokrensis67]

Easily one of the best engine removal videos I've seen.

[@s33therfan]

Thank you

[@jeffreydauhmer385]

I just pulled a 4.7L out of a Jeep today. Hopefully tomorrow I'll have the new one put in. Anyway, I just wanted to say that I must have watched every video (and read a ton of forums) specifically about pulling this engine out a jeep that is on youtube. Even with that, I learned more by watching you swap out this Ram than I did from any of the jeep specific videos. What, I believe, made your video so much more helpful even though I was dealing with a completely different engine bay is that no detail was too small for you to cover. You covered nearly every bolt, how to get to them, and how to deal with them when they inevitably don't do anything you want them to. This was incredibly valuable to someone doing this alone. You covered disconnecting from the transmission very well. Stupidly, most other videos cover everything but this in detail, even though it seems to be the most difficult part of the operation. It was also helpful to see what you used to hoist the engine with. I noticed you didn't have the lifting studs, or the bracket that Chrysler claims is the only way to do it. I just wanted to say thanks! Even though is was for a different vehicle some of the information you put out here made it possible for me to successfully remove my 4.7 from my Grand Cherokee. Thanks again!

[@s33therfan]

Thank you very much for the great feedback , it really means a lot. Thank you for watching.

[@HoodHandyman]

Jeffrey will a 4.0 ltr straight 6 from a jeep cherokee sport fit in a 2005 ram 1500 like this one ?

[@mack606]

I’ve seen this video a while back didn’t know it was the same guy with the ram oil pan gasket replacement this video is top notch as well

[@s33therfan]

Thank you very much.

[@andreadidato1301]

I have a 2001 dodge Dakota 4.7 liter with 312,000 miles and is my daily driver. Motor runs awesome to this day! Awesome video, thanks again.

[@s33therfan]

I appreciate the great feedback.

[@Jayjo76]

I am in the middle of swapping a reman 4.7 into my 2004 Ram. You are a hero for documenting all of this. Thanks!!!

[@s33therfan]

Thank you for the feedback I really appreciate it. Thanks for watching.

[@paulkelly449]

Best video I have seen in a long time, thank you for taking the time to explain everything in detail. Will be swapping a 2004 Ram 1500 after the replacement engine arrives. Your video was extremely helpful with making my Removal and Install procedures.

[@s33therfan]

Thank you for the terrific feedback, and I hope all goes smoothly. Thanks for watching.

[@thomasballantyne8775]

I’m in the midst of an 01 Jeep Grand Cherokee 4.7 swap thought I bit off more than I could chew this video helped me a lot. Thank you! It was very informative

[@s33therfan]

Yes , these are not too bad. I know the trucks anyway have a lot of room . Hope all goes smoothly on yours and it is up and running soon. Thanks for watching.

[@jamesbryan2058]

I just bought an 02 1500 4x4 with the 4.7. Got it cheap because it has a blown head gasket. I am just gonna swap the motor. Thanks for the video.

[@s33therfan]

Best of luck on yours and hope all goes smoothly. Thank you for the feedback.

[@dnichols3932]

Thank you for putting this video up. My truck has been sitting for a while, but after watching this video I feel very confident about doing the motor swap. I saved the video for reference.

[@s33therfan]

Thank you for the great feedback , it is much appreciated.

[@efrainalvarez4481]

Thanks man. Your video help me a lot. I just replace the engine in my 02 dodge ram 4.7. Thanks to your video. Everything come out perfect. My new old engine is running so smooth just took it to the emission test and pass. One thing. I never remove the bumper. Was a little hard to get the engine back in place but thanks for your video

[@s33therfan]

I thank you for sharing the great feedback and I am glad this video was a great help for your motor swap and all went smoothly. Thank you very much for watching.

[@CasualCartier]

I was about to tell you how much I appreciate you doing this video then I read through the comments and seem everyone already told you! Yes this is the best one Ive seen on youtube so far! Thanks!

[@s33therfan]

I really appreciate it and thank for taking the time to share the great feedback. Much appreciated.

[@HemiLyfestyle]

Boy you are good I've done engine swaps and transmission swaps on other people cars but now its time to swap my truck engine and this gives me a refresh on what to expect. Thank you bro

[@s33therfan]

I love these trucks , these are built like a tank compared to the newer generations. I really appreciate the feedback.

[@HemiLyfestyle]

@@s33therfan yes sir, she's been a great truck to me 03 Dodge ram 4.7 320k miles on original engine

[@s33therfan]

Thats what I'm talking about . I am currently driving a 2002 Ram 1500 , it's got over 215k. I had thought about a newer , but as solid and reliable as this one has been , plus improvements , I will stick with it.

[@HemiLyfestyle]

@@s33therfan I was thinking the same, I would get a 2011 Dodge ram with the 4.7 because mine has be so reliable to me

[@TGLzz]

@@s33therfan is this truck really that good, i got it and 2 weeks later 4 cylinders lost compression. I am going to tear down the engine and see what went wrong. But everyone online says this engine is trash even other mechanics ive spoken to. My question is, is this truck worth saving ?

[@DayDreamer4488]

is there some steps we can ignore to make it simpler? do i really need to remove the transmission for instance? also when unbolting the engine can i remove the brake booster before?

[@s33therfan]

I would leave the brake booster , but as far as removing the engine with the transmission , that may be a lot easier. Thank you for the feedback.

[@aquaopp2023]

Best engine replacement video out there. Bless you sir!

[@s33therfan]

Thank you very much.

[@aquaopp2023]

@ just got mine out on a 2010 ram 4.7 30 minutes ago. Went well.

[@johncastro9485]

Thank you for such an awesome video, I have a 2003 dodge ram I’m about to do a engine swap on and this was exactly the video I was looking for. Thanks again!

[@s33therfan]

Thank you so much.

[@gueleaqui]

Great video!! Swapping my 05 RAM 4.7 engine soon. This is by far the best video I've seen. Thanks so much for taking the time. Best regards!

[@s33therfan]

Thank you very much. I appreciate you taking the time to leave this great feedback. Thank you for watching.

[@GawdDayumGarage]

Currently pulling it out of a 3rd gen to put in a Dakota opposite video still very helpful

[@s33therfan]

Hope all goes smoothly , thanks for watching.

[@GawdDayumGarage]

@@s33therfan thank ya man I’ve got it ready I’m to pull out hopefully tomorrow actually

[@chrisjr1028]

I’m about to attempt this on my 2002 when my new engine from Powertrain gets here this week!

[@s33therfan]

Sounds great , I have heard great reviews from them. I bet it will run awesome. Thanks for the feedback.

[@chrisjr1028]

@@s33therfan I hope so. I just broke off the Crank sensor bolt into the new engine when I tried torquing it so I’m at a stand still. Ez outs keep breaking

[@DerekBrown-zs1yi]

This video is perfect if you have mechanical abilities but have never done this truck before

[@dmontrose7446]

Nice video! I got an 08 dodge 4.7 with almost 200k on it. It's still a solid engine but I'm thinking time is limited and a reman will need dropped in. Thanks for sharing your knowledge

[@s33therfan]

Thank you for the great feedback and thanks for watching

[@joekill7455]

Thank you for this video, i learned to do my very first swap and I'm very grateful you made thisb

[@s33therfan]

Thank you very much for the great feedback , and thanks for watching.

[@treate1977]

whats the engine bolt size that you have on top that you have it hooked in order to pull the motor out? Thanks

[@chickencrusher1]

Great detail! Thank you sir. About to pull out motor on a 2003 ram 3.7. Have a great day!

[@s33therfan]

Thank you for the great feedback and thanks for watching.

[@jeremiahmartinez332]

Great video, you made it seem so easy, I’m planning on swapping out my 4x4 4.7 for a 4x4 5.7. I hope it goes smooth

[@s33therfan]

Thanks for the feedback its much appreciated . Best of luck on your project and thanks for watching.

[@simoniekeenainak9482]

How has the build turned out, was wondering if I could put the 5.7 4x4 into my 4.7 4x4

[@ericwilson4398]

What would I have to change in my 02 dodge 1500 4.7 to install an 08 4.7

[@vincenthix8375]

Great video, although I did have to figure out on my own to spin the crank to be able to take the bolts from through the flex plate into the torque converter.

[@s33therfan]

Thanks for watching.

[@layovalenzuela8263]

How come you ran 10w30? I used to run that till I got a reman engine but my truck was burning a shit load of oil weekly

[@ryanv7195]

What a wonderful detailed video. Thank you for taking the time and effort. It's much appreciated! I hope you make more detailed videos because this really will help people. I have 1 question for give me if it sounds foolish. Why did you have to take the bolts off the new motor torque converter and put them back on when trying to mate the motor with the transmission? Would it have been easier to do it outside? Thanks for the info. I'm subscribing!!

[@s33therfan]

The transmission could be pulled out with the engine , some people will remove it that way. The torque converter needs seated in the transmission before it can mate up to the flex plate. If the engine is locked up then it can be removed by pulling it out , however this is a last resort and risk damage to the torque converter seal. Also this is a one way street as it will not simply push back into the transmission. Great question and thank you for watching.

[@ericcross9788]

I'm trying to figure out what the bolts are for the Transmission to engine bolts look like

[@HemiLyfestyle]

Go to the junk yard and practice, that's how I learned what certain bolts look like

[@timothydean]

Thank you for the detailed video. I have an 02 ram with 240,000 I hope it all works out for you .

[@mattgiffin6645]

Do you got a torque spec chart for this truck ?

[@georgecampos7119]

Thanks for showing us how to pull the engine. Keep the good work

[@s33therfan]

I appreciate the feedback and thank you for watching.

[@georgecampos7119]

@@s33therfan I'm getting ready to pull my engine some one put the wrong one i have to replace crankshaft wheel but since I have to do that I'm going to rebuild lol diy. God bless you

[@chrisjr1028]

What part of the video do you remove the bolts that go into the flex plate

[@HemiLyfestyle]

It's very easy, rotate the crank and that's how you are able to get to the bolts but you have to remove the plate first before you get to the bolts

[@joshuadelo]

Literally one of the best videos!!👽💜🛸

[@s33therfan]

Thank you for the terrific feedback, it is much appreciated.

[@calebthomas7502]

What ended up connecting to the 2 red caps at back of motor?

[@s33therfan]

Oh , that was probably for the 2 vacuum hoses that T into the air box. Thanks for watching.

[@dextercollins9118]

This is awesome 👌 video 📹 indeed 👏 this really gonna help me on my 2002 dodge swapping motor out for first time.

[@s33therfan]

Thank you for the great feedback and thanks for watching.

[@dmontrose7446]

I commented awhile ago on this video now I'm waist deep in my truck project. I removed my 4.7 on an 08 dodge ram. Followed your great video to a "T". Only thing I missed is one wire that comes out of the rear of the engine (intake area) Runs to a connector at the top of the bell housing. I did not break the wire but I stressed it. Do you know what it is for? Wish I could send pic. Hoping all is OK but wanted to know if I have issue when I slap it all together and have problem to isolate it.

[@JK_homestead]

At 41 mins and 53 seconds in the video how did you end up getting that sensor disconnected? Mine is stuck really bad

[@giovannijimenez3816]

Is if a lot more harder to change the engine on a 4wd? I’m planning on changing it my self on my 2003 Dodge Ram 1500 4.7 4wd

[@s33therfan]

Its a little more difficult getting to the motor mounts and 4x4 bracket etc. , but with the rams they have alot of room to work so it should not be too bad. The way the fronts come off of the rams is a nice feature and clears all kinds of room to work. Best of luck on your project and thanks for watching

[@timothydean]

I forgot to ask how is ur truck running now?

[@markratcliff4288]

Will my 2000 5.2 bolt to my 2004 4.7 tranny

[@rodneystewart7173]

How do you place the wiring harness for 4.7 injector harness and coil pack harness

[@s33therfan]

They will pretty much go into place as you lay them along the cylinder head. Sometimes I will mark and label them as well. Not sure if this answers your question. Thanks for watching.

[@rodneystewart7173]

@@s33therfan I cannot find the end connector unless I tear out all the wiring harness I just need the fuel injection harness

[@s33therfan]

Yes , the only other way besides replacement would be to solder in what you need. Maybe get one from a salvage yard. They sell the fuel injector connectors themselves. amzn.to/3jSh3UB

[@Ratherbeshifting]

I got a question, my 03 dodge ram 4.7 engine is no good, I put a 04 Durango 4.7 engine in hasn’t got it started yet I’m still putting few minor things on but do I need the ecm or it should fire right up right? Is the Durango 4.7 same as the dodge ram 4.7?? If anybody has any info on this please let me know would be much appreciated.

[@s33therfan]

They are the same , you may need to swap over a few things but they are the same engine. Thanks for the feedback.

[@fucheduck]

I have a 2004 Dodge RAM 1500 with a 3.7 V6 was wondering if anything special has to be done to upgrade to a V8?

[@s33therfan]

You really need a wrecked doner truck to make things easier. I believe the transmission may work but not sure , however you need the harness, ecm , mounts, manifolds . I am sure there are a lot of little things but that is the main components. Thanks for watching.

[@billharvey90]

Excellent video and very detailed, thank you! N u a beast holding phone for hours and swapping motor with the free hand lol u got a subscriber! Thanks again fr

[@s33therfan]

Thank you very much for the sub and thank you for watching.

[@jimnugent4966]

Excellent video thanks for taking the time to record this

[@s33therfan]

Thank you for watching .

[@israel22888]

I was kinda hoping to see how you tighten flywheel bolts to the toque converter

[@s33therfan]

I just use whatever will fit if I cannot get the torque wrench in there and just tighten by feel . Also the bolts I never go more than 25-35 ft lb at most using loctite because of their size. Wish I could be more help and thank you for watching.

[@israel22888]

@@s33therfan Awesome video, I learned a lot. Thank you for the reply.

[@scottsmith8934]

@@s33therfan Ive never ever ever torqued specked toque converter bolts and never ever ever had a problem.

[@joshuadelo]

Hey brother could you help me out? I did my 5.7 and now I am getting p0300 and p0308. The guy I bought the engine from says the heads weren't pressure tested. If I replace the heads should everything be okay?

[@s33therfan]

It is really hard to say. I will say that head replacement would be the cheaper route to start with, and from there if unsuccessful , a total rebuild. I know these engines 4.7 or 5.7 are rediculous expensive. Best of luck and hope all goes smoothly. Thanks for watching.

[@matthoyer9886]

Thanks for the video I learned a lot mostly that this is beyond my pay grade. I have an 03 4.7 that needs a swap I’ll be looking for some help with mine

[@s33therfan]

Thank you very much for the kind words I hope everything goes well with yours and thank you for watching.

[@evertocampo1581]

Thanks for the video that’s help me out but I got Questions can I swapped engine from Jeep Cheroke 2002 4.7 v8 on my dodge 2002 4.7 v8 too

[@s33therfan]

It should swap no problem . The oil pan mounts intake would need changed over but no issue otherwise. Thanks for watching.

[@evertocampo1581]

@@s33therfan thanks m man apréciate you help thanks so much

[@ChrisB-cx6td]

@@evertocampo1581 did you ever swap

[@NoRegretKale]

Hopefully you reply .. but was the only thing you had to change was the motor mounts?

[@s33therfan]

The motor mounts , the oil pan was different , the brace between the pan and transmission , the holes needed chased with a tap because they are not used on a dakota engine , the exhaust manifolds I swapped best I remember. Nothing but minor differences swapping accessories. Thanks for watching.

[@SeanDIY]

I was thinking rebuild vs buying a replacement so that there wouldn't be the other vehicles issues, no?

[@s33therfan]

A rebuild is a great option , it can get costly. You would want to have a shop go through the cylinder heads , bore the cylinders and check the crank while they are at it. Then you just need a decent rebuild kit , once the shop work is done and the piston sizes , crank bearing sizes have been determined. Seems like the last time I priced everything out the reman or rebuilt engines were about the same at around 2500. The cheapest route may be finding a used engine but then again nothing beats a rebuilt engine with zero miles. Anyways best of luck on whatever you decide , the prices I have will vary from place to place and labor cost may be cheaper in your area for the machine shop work. Thank you for watching.

[@travisjohnson4983]

How much harder is this if its a 4X4 and 5.7 hemi ?

[@s33therfan]

I replace one in a Durango and it was not too bad except for a few bolts around the differential. Thanks for the question.

[@kevinkearney9519]

Best video I have seen. I have a 04 ram 1500 4.7 removed engine and purchased new replacement engine old engine has no egr but new engine has a erg. Is it ok to blockoff with plate or should I try to find a different engine

[@s33therfan]

Thank you very much for the great feedback it is much appreciated.

[@igxlevihz6251]

I’m putting a 5.7l v8 in my truck so far everything seems to be the same but do you think there are any differences or will this video still work to help me getting the new engine in there

[@s33therfan]

They are pretty similar for the most part . Best of luck on your project and thanks for watching.

[@WindandraincreatesW]

I have a 04 dodge ram with a 5.7l, is this the same process as your 4.7l

[@s33therfan]

It is basically the same , and in my opinion the hemi seems easier. Thanks for watching.

[@CCROSS5882]

for those that don't stay by the time you get back to the impact wrench I used to put some cardboard in the socket and tap it on good, because that is very annoying when it falls off LOL I just got an 02 Ram 1500 says 5.7 HEMI on the fenders the Vin says its a 5.9 I am looking trying to Identify engines at this moment and came across your Mine has 8 spark plugs but most videos i find have 16 plugs, I'm happy with 8 the plugs I have LOL looks like your engine, where is the id number on the Engine?

[@frankyhoward2941]

Nice work! Very detailed. Crazy question, can you pull the engine and transmission out together? Looking to swap both out on my Dakotas. They are 4x4 also. If that matters. Just wondering.

[@s33therfan]

Great question. You absolutely can . It may be just as easy or easier. Thanks for the feedback.

[@curtissheppard1996]

Very detailed, thank you.

[@s33therfan]

Thank you for the terrific feedback.

[@ke5wkf]

Good stuff. Very helpful. Thank you for sharing.

[@s33therfan]

Thank you for the terrific feedback , it is much appreciated.

[@armandhammer2235]

Excellent tutorial. Thanks.

[@s33therfan]

Thank you for the great feedback, much appreciated.

[@joegold164]

How different is the 4.7 and 5.7 removal?

[@s33therfan]

Its not much different they basically mount the same and bolt up to the transmission the same. Thank you for watching.

[@henrycole8705]

The Trans coolers can and will become plugged up. Its best to replace them with a aftermarket aluminum. Hayden 12x12 is much better. and cheap

[@jmsjro6]

While this is a great how to video I have to ask...Is this an engine where installing a used 4.7 is a bad idea? Meaning is this one of the used engines you shouldn't consider installing unless it is a last resort? I have no idea...That's why I am asking. Ty

[@s33therfan]

They are good engines , not as good as the 5.7l hemi by no means but get the job done. I have a 2002 with over 220k on it . I think it how they are taken care of for the most part. The weak point is their head gaskets . With the price of the used 4.7l a reman or rebuild would be a far better option. Thanks for the feedback.

[@RynColynz]

brother, aint no air filter in it

[@venM9]

Remove the intake manifold first. Then removing the top transmission bolts is a breeze.

[@rigoruiz6172]

Quick question bro I have a 03 ram 4.7 single cab rwd how many catalytic converters does it supposed to have ?

[@HemiLyfestyle]

Google it bro

[@angelobando3623]

Saludos. alguien me podría enviar algún video de como extraer para sustuir el motor de una dodge ram van año 86...Gracias

[@Cowboy350]

Great video

[@s33therfan]

Thank you.

[@Cowboy350]

@@s33therfan welcome

[@JoseGarcia-pc4zm]

Thank you nice video

[@s33therfan]

Thank you for the great feedback.

[@jacobwilliams9508]

I’m doing my truck I have no ideal what I’m doing thanks for the video lol

[@s33therfan]

Thank you for watching.

[@johncornharvester]

great video, thank you so much!

[@s33therfan]

Thank you for the great feedback and thanks for watching

[@basiliosantiago3547]

THANK YOU, BIG JOB...

[@s33therfan]

Thank you for the great feedback.

[@edwardjayfix]

Nice!!!

[@s33therfan]

Thank you for watching.

[@luiscastellanos3546]

nice....how much you bought the engine?....great work

[@s33therfan]

I got the engine for around 1000 and thats delivery included from ebay. That was with quite a bit of searching for over a week. The miles were pretty low , it was out of a dodge dakota . Thanks for watching

[@heroicplayer5574]

One small trick if you hit electrical connectors with some penetrant it’s makes it easy as fuck to take them off 95% off the time.

[@HemiLyfestyle]

I didn't know that, wow thanks 🙏🏽

[@mattl.3861]

Bravo!

[@s33therfan]

Thank you for watching.

[@clintcarter]

This...was a gad dang adventure.

[@s33therfan]

thank you for the awesome feedback , it is much appreciated.

[@ChrisB-cx6td]

@@s33therfan Did this a few years ago! But your method is much better very relaxed and stress free.. Like the different work arounds especially the ac compressor lines. Seem to have similar vehicles as you. Many people are mechanically inclined but sometimes need some one like you .

[@Spinmoove]

Oh YEAH!!!

[@scottyyeo7759]

I’m just trying to figure out how to get the damn engine cover off😂

[@henrycole8705]

Sound like billy bob thorton

[@jessehorath2114]

v8

[@s33therfan]

Yes, this was a v8. Thanks for watching.