How To Remove Rust From A Cast Iron Table Saw | Woodworking Projects

  Рет қаралды 17,903

Stoner Ericson

Stoner Ericson

Күн бұрын

Пікірлер: 35
@JohnnyAustinVideo
@JohnnyAustinVideo 2 жыл бұрын
Bro, great vid, and your hair looks F'n Awesome! I'm super jelly with my stupid short hair!
@scotttomberlin
@scotttomberlin Жыл бұрын
Good deal.Great results wthout 15 different steps,grits, and products.Going to do my $50 113 storage unit find today!
@StonerEricson
@StonerEricson Жыл бұрын
Nice I love it let me know how it goes
@scotttomberlin
@scotttomberlin Жыл бұрын
Hey Stoner, Got a 113 in bad shape but ran for $50. Tried your method but still have a ways to go. Still have black spots and circles,More wet/dry cycles,lower grit,more pressure? Help!
@StonerEricson
@StonerEricson Жыл бұрын
Start over with 80 grit and work your way back up to 320. Let me know how it goes. Happy Woodworking.👍
@williamtyree3896
@williamtyree3896 2 ай бұрын
Lysol toilet bowl cleaner with rust remover is the best thing I've found for my 113
@christinepease1001
@christinepease1001 2 жыл бұрын
Now that's pretty impressive!
@ReneeGuidry-d7h
@ReneeGuidry-d7h Жыл бұрын
Awesome!! Thanx for the info! I noticed the 2 holes in the table top, mine has 2 holes also but in different places. Can’t figure out whyyyyy they are there🤔. Do you know why? Tia!!
@StonerEricson
@StonerEricson Жыл бұрын
Yes they are holes to set a miter pins system that was proprietary to the saw
@harrycul
@harrycul Жыл бұрын
Great video, Bro!! I have that same saw and due to medical issues I have not been able to be in my shop in over a year, but now I am ready to spend a little time in there. My cast iron top is the color of old brown shoe leather. I have my work cut out.
@StonerEricson
@StonerEricson Жыл бұрын
Glad u are getting back in the shop happy woodworking 👍
@Rebel9668
@Rebel9668 Жыл бұрын
I was hoping to see it from the very rusty start. I picked up a 9" Rockwell contractor saw last weekend with a very rusty top.
@StonerEricson
@StonerEricson Жыл бұрын
This process will clean it up
@bobmyers1133
@bobmyers1133 Жыл бұрын
What fence are you running I have a saw like that and the fence isn’t the best.
@StonerEricson
@StonerEricson Жыл бұрын
The one that came with it I agree the fence is not the best I got this saw totally recked so I had to rebuild it I’ve failed me fence in the best I could and it works pertty good but I always double check my measurements with my tape b4 ever set up thanks for the comment means alot happy woodworking
@dennisg11348
@dennisg11348 2 жыл бұрын
Great video! Thanks
@CraftedbyRay
@CraftedbyRay 2 жыл бұрын
Cool video man!
@StonerEricson
@StonerEricson 2 жыл бұрын
Thanks man I gave you a shout out an upcoming video it comes out in a few weeks
@CraftedbyRay
@CraftedbyRay 2 жыл бұрын
@@StonerEricson thank man I appreciate that
@johnmayer4747
@johnmayer4747 Жыл бұрын
Great informative video!! Found out about 3 years ago that WD40 is a solvent, not lubricant. One thing different I use is emery cloth instead of sand paper so I will change to sandpaper instead. Thank you for the info!!
@StonerEricson
@StonerEricson Жыл бұрын
I will totally try that thanks for watching means alot happy woodworking 👍
@randalosgood
@randalosgood 9 ай бұрын
Greetings. Twenty-five years I inherited my father's table saw, which promptly got 'ruined'(or so I thought) by a leak directly above the table, causing massive rusting. I parked it in a corner, covered it, and forgot about it. Now I need a table saw for a project, so I went looking for a fix and found your video, tried your steps, got amazing results considering, but there are still some tiny rust pits remaining. The top feels smooth now, and I'm going to go over it with 440 yet to really smooth it out, but before waxing I'd like to know if there is anything else I could do to remove those pits? Thank you.
@StonerEricson
@StonerEricson 9 ай бұрын
Not in my experience those big pits are actually indentations in the cast-iron top, so just get it as smooth as you can and wax it with paste wax glad you like the video. Hope it helped. Happy Woodworking to you. 👍
@tnhomestead
@tnhomestead 2 жыл бұрын
Was with you till the elbow grease! Lol Ran out couple days ago.
@StonerEricson
@StonerEricson 2 жыл бұрын
Hahahahah nice Thanks for watching
@cmcnichols4
@cmcnichols4 7 ай бұрын
Something I just learned yesterday about the WD-40 can - it will spray a wide pattern without removing the red tube....you just leave the tube in the "down" position against the can and spray...i.e., it has two spray positions. Not sure how WD-40 thought that was obvious or intuitive....great video - thanks!
@StonerEricson
@StonerEricson 7 ай бұрын
Nice pro tip thank you happy Woodworking to you
@Brian-fu9um
@Brian-fu9um 2 жыл бұрын
Nice vid Stoner ! Did you have any paintability issues with wood after coming in contact with residual WD40 on the table top ? I have an old Jet tablesaw I BADLY need to clean. \Brian
@StonerEricson
@StonerEricson 2 жыл бұрын
No issues at all thanks for watching means a lot
@DaveWrightKB9MNM
@DaveWrightKB9MNM Жыл бұрын
I have a Rockwell 10" Contractor saw and the previous owner did some staining and that got on to the top. I havent really gotten serious about cleaning it yet because the whole thing needs to be gone through, but will this also work on the stain that is in the top?
@StonerEricson
@StonerEricson Жыл бұрын
Yea this process work great, thanks for watching me that happy Woodworking
@mooselee902
@mooselee902 3 ай бұрын
Skip half the video to get something useful
@StonerEricson
@StonerEricson 3 ай бұрын
That’s perfect. Glad you found something useful. Thanks for watching. Happy Woodworking to you.
@allynhansen7398
@allynhansen7398 3 ай бұрын
Build I thought,.......you know,.........B U I L D,.........
@StonerEricson
@StonerEricson 3 ай бұрын
Nice you figured it out. Thanks for watching. Happy Woodworking to you.
how to remove rust from cast iron
13:15
wittworks
Рет қаралды 176 М.
Remove And Prevent Rust On Your Table Saw
17:34
PatriotDIY
Рет қаралды 3,2 М.
Don’t Choose The Wrong Box 😱
00:41
Topper Guild
Рет қаралды 62 МЛН
To Brawl AND BEYOND!
00:51
Brawl Stars
Рет қаралды 17 МЛН
Что-что Мурсдей говорит? 💭 #симбочка #симба #мурсдей
00:19
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41
I've been doing it all wrong
27:35
Bent's Woodworking
Рет қаралды 424 М.
From Rust To Riches - Restoring 40 Year Old Cast Iron
12:50
Woodshop Junkies
Рет қаралды 88 М.
Save Your Rusty Table Saw!
10:11
Make Everything
Рет қаралды 101 М.
How to clean rust from cast iron tools- and KEEP IT AWAY!
5:26
Stumpy Nubs (James Hamilton)
Рет қаралды 459 М.
Removing Rust and Protecting a Cast Iron Table Saw Top
5:16
The Newbie Woodworker
Рет қаралды 55 М.
Best Protection for Cast Iron: The Final Word
9:27
FranklinWoodWorks
Рет қаралды 36 М.
5 Table Saw Upgrades I Should Have Done YEARS Ago!
14:23
731 Woodworks
Рет қаралды 110 М.
Remove Rust from Tool Tables with WD-40, Scotch-Brite, and Sandpaper
5:22
ShorePoint Creations
Рет қаралды 133 М.
How to maintain and clean a table saw top / Saw maintenance
10:32
Walkers Woodworks & DIY
Рет қаралды 77 М.
Restoring my grandfathers table saw
8:38
Mark Susak
Рет қаралды 37 М.
Don’t Choose The Wrong Box 😱
00:41
Topper Guild
Рет қаралды 62 МЛН