Wow, thanks for the video. I removed my door panel because I heard a extra little something every time I opened and closed the door.. and I found a 1.99 in change!!
@andrewmcmillions31386 жыл бұрын
Hilarious xD
@DIYStangsandFreedom6 жыл бұрын
Wow 😂 the Stang is now making you money!
@YouTuber707_5 жыл бұрын
Same here,I always put change in the door pocket but I noticed a lot of it slipped down inside how do I get out it ?
@prestigeproductions76874 жыл бұрын
yup same
@kraagnjilwulf1413 Жыл бұрын
No sud push, no sponsor, no long-winded stories. Subscribed.
@stevensheldon9271 Жыл бұрын
These videos are fantastic. Short and to the point without endless unrelated talking.
@greedproductionz95137 жыл бұрын
Off topic but those are some clean ass wheels lol
@latemodelrestoration7 жыл бұрын
Thanks! -Landan
@BoostedCoupe6 жыл бұрын
What wheels are they?
@Philthese936 жыл бұрын
SVE drift wheels
@angelgjr19995 жыл бұрын
I try to keep my wheels clean but ceramic brakes leave dust all the time :/
@stevenfriend27108 ай бұрын
As an retired locksmith I have done hundreds of door panel removal. Your descriptions are great. 1st time on this model. I like how you said "if they're still there" about the push pin and screws lol.
@latemodelrestoration8 ай бұрын
I think that's the age old saying with any car! Haha! -Landan
@thecustomer63313 жыл бұрын
My window is possesed and loves to roll down on its own and then keep trying to roll down. Looked this up to try and get in there and see if somethings loose or just shorting out. Also great shots,super straight forward
@1andrew1232 жыл бұрын
You ever figure out the issue? I disconnected the passenger window motor now the drivers side is doing it!
@Psittac205 жыл бұрын
Thank you for the video, I bought a 99 GT in December and it's still in the garage with a laundry list of little gremlin's to fix. One of them being the drivers interior door handle being very loose and pulling the whole interior panel with it. When I got it off I realized that they didn't put two of the screws back in and in turn that busted the metal support loose from the panel. Have some JB Weld ready for when I find my vise grips to hold it together. Also my door panel has a silver piece above the handle and that's peeling off too, going to epoxy it back on and paint it. $25 in misc items is going to save me the $500 they want on ebay and/or the hassle of finding a panel at a junk yard that'll match.
@latemodelrestoration5 жыл бұрын
Hello Thank you for the email. That is great that you purchased a 99 GT, send us pics of your project. We would love to see them. If you have any other questions, Please feel free to call or email me directly. 254-296-6556. Have a Great Day.
@loviedebiasio88644 жыл бұрын
Thanks wish I had this video years ago when I broke part of my panel taking it off DOOOOH!
@Hopinmypony4 жыл бұрын
As a mustang owner i can say that the junkyard should be your best friend
@ROYCE4157 жыл бұрын
Finally some SN95 stuff! Can you do a dash removal and install?
@latemodelrestoration7 жыл бұрын
A heater core replacement is on the list which involves removing the dash. No guarantee on a time, though. -Landan
@pdennis93 Жыл бұрын
Might need to do this as a winter project when it cools off. I just replaced my passenger mirror and dropped one of the 3 nuts to parts unknown. I then dropped one of the plastic covers the new mirror came with as I was installing it as an acting bolt for that missing one. Now both are down in the door somewhere. At least that mirror is tight with just 2 bolts and that cap.
@lukegrossman2762 жыл бұрын
thanks for this i bought an 03 gt and talked the guy down $300 and he took all the sound stuff out including the head unit, time to get replacing..
@chucresuaidjunior84639 ай бұрын
Thank you very much. Helped me a lot I didn't find any videos about this in Brazil.
@latemodelrestoration9 ай бұрын
You're welcome! Glad the video helped you out! -Landan
@justinemrick52113 жыл бұрын
*** For anyone that is attempting to do this on an older vehicle in hot summer climates make sure and use a heat gun, because glue melts from the Tweeter cover and bonds with the plastic. If not you will break it, found that out firsthand... ***
@PsykoSmiley4 жыл бұрын
Thanks dude! Just pulled in and my windows crooked and won't roll up so gonna get in there and see what I see.
@DarkSplash993 жыл бұрын
Part of my driver side door is out so if i don’t close it hard enough it doesn’t close so I need to try to fix it ASAP
@rileyfox16924 жыл бұрын
Redhead forgot to mention the screw in the very middle under the console insert. Tore my entire panel bracket off, thanks.
@erickrodriguez60673 жыл бұрын
Hi, what is the screw in the very middle of the console insert? I need to remove the door panel and i dont wanna break anything.
@user-qh7zn2qs8i2 жыл бұрын
Awesome! Thanks!
@nite82hawk7 жыл бұрын
Thank you! can you show how to replace the weatherstripping? I get some wind noise on my 03 Mach 1 and would like to replace it.
@latemodelrestoration7 жыл бұрын
Inner, outer, roof rail, and door to body will be releasing this week. -Landan
@nite82hawk7 жыл бұрын
Late Model Restoration Thank you very much!
@misterbulger2 жыл бұрын
Somehow my door ajar switch and the window control circuits are crossed up in my door. The window buttons now control the dome light and door ajar dinger. Somethings going on... now to pry this door panel off
@brew48484 жыл бұрын
Can you guys sell the back door panel and not the insert. MANY people like my self would but dash and door panels that are black, a lot of people want to swap from tan to black
@TraitorPotater5 жыл бұрын
Why don’t you guys sell black door panels like that!? 😭
@adrianlopez87967 жыл бұрын
can you should a vídeo on how to replace a broken header board
@roadstar4997 жыл бұрын
How do you remove push pin from front of door panel...? Never heard of one on door panel before..thax
@andrewmcmillions31386 жыл бұрын
Flathead to get it started then a needle nose pliers
@bonyure3 жыл бұрын
Hi...!! i neet to replace the rear speakers, how do I remove the back cover??????? HELP!!!! It´s a 1994
@latemodelrestoration3 жыл бұрын
Hey Adro, please give us a call at 1-866-507-3786 or email us with the link and one of our customer service representatives can assist you with that: lmr.com/contact
@brendandionne24384 жыл бұрын
Help I'm trying to replace my door on my 2000 I can not find the harness connections thats under the kick plate pleaseee helppp DRIVERS SIDE cant find any videos or forums that tell you where it is
@latemodelrestoration4 жыл бұрын
Hey Brendan! I just wanted to touch base with you as your comment was on Friday. Were you able to find the door wiring harness connection inside of the kick panel? -Landan
@thetangibles82425 жыл бұрын
Can't get the door back on for the life of me.. how do I get the lock pin back in door well lining everything else up with it.
@latemodelrestoration5 жыл бұрын
This can be hard if you have never replaced one of these before. If you have a friend that can lend a hand with aligning the rod while you stab the panel into place, this normally helps out. An extra set of hands will go a long way on this.
@uptone121117 жыл бұрын
Thanks!
@jesusbeltran74805 жыл бұрын
What aftermarket tweeter do you rum
@jesusbeltran74805 жыл бұрын
Run*
@hirow74454 жыл бұрын
What size wheels are those?
@latemodelrestoration4 жыл бұрын
These are 18x9/18x10 SVE Drift Wheels - lmr.com/products/94-04-SVE-Drift-Wheels We no longer offer them in silver for 94-04
@maniauncontrollable63445 жыл бұрын
How many inches your car is low?
@latemodelrestoration5 жыл бұрын
The car in this video has Steeda Sport lowering springs without isolators. Here is a link to the springs: lmr.com/item/ST-5558200/79-04-Mustang-Steeda-Sport-Lowering-Springs-Kit
@denisfrancoeur59712 жыл бұрын
Hello. At 1:16 you indicate the place where a second screw should be remove. Behind the panel there is white plastic spacer for this screw. Mine spacer was probably broken by someone who did not know how to open this panel. where can I purchase this spacer. I have a photo of this spacer, if you want to see it , give me your email address.
@latemodelrestoration2 жыл бұрын
Hi Dennis, here's a link to all of our door panel parts: lmr.com/products/94-04-Mustang-Interior-Door-Components If you don't see the spacer that you're looking for, we would recommend sourcing one from a parts car or someone that may have one available.
@anthonyfox79873 жыл бұрын
What rims are on that car?!?!
@latemodelrestoration3 жыл бұрын
They're our SVE Drifts. Check the link for more info! However, the silver option is discontinued. - lmr.com/products/94-04-SVE-Drift-Wheels
@johnlewis57743 ай бұрын
"Reverse these steps to get it reinstalled"?? Show me! Therein lies my current struggle
@latemodelrestoration2 ай бұрын
Set the door panel hooks into the lower provisions on the door frame. Roll it forward and feed the door lock knob into the opening. Seat the door panel into the inner door belt weather strip. Reinstall the door cup. Attached the switch assembly to the door panel insert. Reposition the insert. Reinstall any hardware that was removed. If equipped, reinstall the tweeter.
@maryduniphin8686 жыл бұрын
Pull down on the handle cup then remove..if only it was that damn simple..
@Oblithian5 жыл бұрын
haha, I was a little incredulous
@bobdroidsky2253 ай бұрын
It would have been nice to see the actual process, as opposed to watching an actor narrating how it would have been done! Just saying....
@latemodelrestoration3 ай бұрын
Are we watching the same video because the removal process was shown. -Landan
@bobdroidsky2253 ай бұрын
@@latemodelrestoration My Bad!!! 😅
@adrianlopez87967 жыл бұрын
can you should a vídeo on how to replace a broken header board