How to Remove SRS Airbag Control Module & Seat Belts on Nissan Rogue | MyAirbags

[@Yoyo1119]

Do you have a video for 2006 to 2000 nissan Quest? Thanks for your time and help.

[@MyAirbags]

Sorry, no

[@arsalan3889]

I have a 2013 Nissan Altima with a code B0020, any idea what might cause it and what I need to do?

[@naeemanis6144]

Do you have Nissan Murano airbag for steering

[@MyAirbags]

Naeem, While we do not have Murano airbags, we can still help you save a lot of money by professionally resetting your airbag module and seat belts. We have 24-hour turnaround on all those parts: Here: www.myairbags.com/product-category/repair-return/airbag-module-reset/?_make=NISSAN&_model=MURANO

[@7x70.]

Would you recommend an online shop to buy new airbags?

[@MyAirbags]

@@7x70. try: car-part.com/

[@kingdarkem]

Hmm my shops telling me I need a whole new seat, and control module....something about the passanger seat has a mat in it connected to the module and it wont pass inspection and they want 3 grand to fix it... How easy is it to just replace the mat? Does the mat need to be programmed? 2010 nissan rogue.

[@MyAirbags]

There is a passenger weight sensor that does go bad in the passenger seat. However if vehicle was in an accident then the ORC/OCM Airbag Control Module can be reset.

[@kingdarkem]

@@MyAirbags have not had any accidents. Just dont wanna drop the bookoo bucks the shops telling me I need to replace the whole thing....or end up with mix matched seats...

[@mqbr22]

Hello. I have a 2015 Nissan Rouge Select with a flashing air bag light on. Tried the reset with the key cycle method but didn’t seem to work. Could it be possible to reset with a proper scan tool or is there other issues?

[@MyAirbags]

If the vehicle was not in an accident, then it it would be best to use a diagnostic scan tool to pull codes. However, if the vehicle was in an accident, then the airbag module will need to be reset

[@roboslide]

I just used two tiny flat screwdrivers to remove the connectors, it took like a minute. Once I had the nuts and scew out.

[@MyAirbags]

Great job 👏

[@hali2758]

Hi I have B1057 code for my Nissan Murano 2006, how can I fix it? Please

[@MyAirbags]

B1057 for NISSAN / INFINITI = Driver Air Bag Module Short. Possible causes: 1. Faulty Driver Air Bag 2. Faulty Spiral Cable Driver 3. Air Bag harness is shorted Driver 4. Air Bag circuit poor electrical connection= IF IT is ... a bad or melted Spiral Cable, we have some for sale that are very affordable $9.99 : www.myairbags.com/product/airbag-plugs-clockspring-plugs/

[@hali2758]

I do fix the number 2 but the light still on

[@MyAirbags]

Yes, this area (driver airbag) can be complicated. There 3 parts in this area. Any one of them can be causing code B1057. We recommend to check each part.

[@hali2758]

Do you have any shops close to Olathe Kansas

[@MyAirbags]

Hi, Everyday, we help body shops, collision shops and automotive professionals in all 50 states! You can send the module in for reset instead of buying new. Same for the seat belts as well. We also service many other automotive electronics. Most parts have a 24 hour turn around so the service super fast and saves you a lot of money. You can start right here: www.myairbags.com/#

[@hali2758]

Do you have any shops in Kansas

[@MyAirbags]

We can help you. Everyday, we help body shops, collision shops and automotive professionals in all 50 states! You can send the module in for reset instead of buying new. Same for the seat belts as well. We also service many other automotive electronics. Most parts have a 24 hour turn around so the service super fast and saves you a lot of money. You can start right here: www.myairbags.com/#

[@mbkey6893]

Good evening, I greet you. I have a Nissan Qashqai 2015. After an accident, the car does not start, maybe because of the Airbag unit but the information was crash Thank you very much, please inform me

[@MyAirbags]

mercedes Azerbaijan, It does not seem likely that this is the reason why the car is not starting. Since the car was in an an accident, you will need to get the airbag module reset anyway so you can definitely try it and check. You can start your reset order here: www.myairbags.com/

[@Thesilverteeth]

Is the location the same for nissan murano?

[@MyAirbags]

Ulaanaa O, Omar, We don't have the video for the Nissan Murano yet, however we do have a few Nissan removal videos that are similar and should help with the overall process. Location VIDEOS are here: www.myairbags.com/srs-airbag-module-removal-videos/ All other vehicle module location lookup here: www.myairbags.com/srs-airbag-control-module-location-lookup/ Thank you for your excellent question and comment. Please let us know if we can help you on future flips / projects. Reset / Repair service orders can be placed here: www.myairbags.com/product-category/repair-return/airbag-module-reset/

[@hali2758]

I need help

[@MyAirbags]

Yes, what can we help you with?

[@Yur1994]

I just received my module and seatbelt. Do I need to do any other type of reset to the module so the airbag light doesn't come on?

[@MyAirbags]

Hi Lex, once everything that deployed has been replaced and connected properly, once you install the reset module, the light will turn off. If it doesn't that means there is still a part that hasn't been replaced or connected properly. If you aren't sure what the problem is, the first step is to diagnose the airbag light. Hook up the scan tool / scanner to the car and read the airbag codes. You connect the scan tool right into the OBD port/plug. Its usually located below the steering wheel, on the left. You are welcome to reply to us with the trouble code that it reads. We also have a support team available by phone and email thats willing to help. If you contact them, have your order # ready. www.myairbags.com

[@adubieyinomo7055]

Hello can you help me get nissan rogue 2017 bcm with the pcm, I need it urgently

[@MyAirbags]

Adubi, We dont have BCM or PCM in stock but we recommend this website to search: car-part.com

[@lawrence5017]

How do you scan the srs system?

[@MyAirbags]

There is a lot of different diagnostic scan tools that have the option to scan DTC codes. Here is more info on diagnostic scan tools blogs.myairbags.com/my-airbag-light-is-on/

[@ramondiaz1190]

What is the scanner that you recommend to deactivate the airbags after an accident?

[@gtrelectronics9729]

B0010-13 on nissan rogue t32 , any ideas what is wrong ? Thanks

[@MyAirbags]

kzbin.info/www/bejne/e6qzgaOgpdaSpM0

[@DaliborLabudovic]

Hi I have a B0020 code on my 2014 Rogue. Do I need to just send in the module?

[@MyAirbags]

Code B0020 shows a Left (Driver) side airbag. Most likely a bad connection or that airbag needs to be replaced. If vehicle was in an accident then the airbag control module needs to be reset. Also check your seat belts to make sure they work good. For more info see our website www.myairbags.com

[@arsalan3889]

Were you able to fix this?

[@cal4333]

Whatssup bossman! Great video bro! Is it possible to get the airbag light that stays on, reset Temporarily for some days?.... Secondly, can one drive without the module, in order to get it Reprogrammed?......IF so, for How long??

[@MyAirbags]

It depends on why the light is on to begin with. If you're not sure why the light is on, its best get it diagnosed with a scan tool. If the module is bad due to an accident, you can send it in for reset. As for driving without the module, here: help.myairbags.com/hc/en-us/articles/115012408547-Can-I-drive-my-car-truck-while-the-airbag-module-is-removed-

[@cal4333]

I Appreciate it Thanks

[@russodfedny]

I have a 2008 Nissan rouge air bag on. occupancy sensor front passenger side I have kids I'm worried I did a lot research on google KZbin please help

[@MyAirbags]

In order to find out why the airbag light is on, you would need scan the airbag system for troublecodes using a scan tool / scanner. If you have the trouble code, you can post it here and we can provide some advice.

[@russodfedny]

Ok thank you

[@ommasko1209]

My srs module is damaged by water, can it be repaired??

[@MyAirbags]

Water damage can't be reversed. If you look at your module, theres a part number on it. Use that part number to search our inventory: www.myairbags.com/product-category/parts-in-stock-ready-to-ship/airbag-control-modules-ready-to-ship/

[@Idtelos]

What about the passenger occupant sensor code B00A0 ? Bought a Rogue with a salvage title. No light for a while, then it started coming here and there until it stayed ON, reads as current code. Thinking the shop that repair vehicle did not reset airbag module. Your thoughts?

[@MyAirbags]

This code is for passenger weight se sensor. If that is the only code you have, then that occupant weight sensor needs to be calibrated, and that can be done with a diagnostic scan tool. However, if you have code B00A0 and a crash code, then you need airbag control module reset. See myairbags.com for reset and repair services.

[@Dynoventura]

Hola amigo tengo código b1421 Nissan xtrail 2015

[@MyAirbags]

Hello Saverly, B1421 is inside the airbag computer module: blogs.myairbags.com/nissan-srs-airbag-code-b1421-frontal-collision-detection/ We can reset this code. You can start your order here and send in your module for reset: www.myairbags.com/product-category/repair-return/airbag-module-reset/?make=NISSAN&model=XTRAIL&year=2015

[@3sleepykitties839]

I bought Nissan Rogue 2016 that was in accident with airbag deployed. The re-builder replaced the airbags but the SRS light stays on. I suspect the airbag module was never reprogrammed. I'm planning on removing it and sending to you (I have done it with my Honda and it worked well). Since I need the car, can I still drive it without the module? The SRS system is probably not even functional without the module being reprogrammed?

[@MyAirbags]

Thank you for commenting. For your needs and service: www.myairbags.com

[@jasmynechester6233]

Okay well my dog chewed through the Airbag harness underneath the front seat in my Nissan Rogue Sport 2020. The dealership quoted me $6,600. Which I believe is drastically overpriced. Being that this seems so simple I could do it myself… smh

[@MyAirbags]

That is crazy overpriced. Most likely just need to get the wiring fixed instead of replacing the entire wiring harness.

[@cohosogroup]

I was just quoted $1300 for the module and $1900 for the seat 🤦🏻‍♀️

[@MyAirbags]

We can reset your airbag control module and rebuild your seat belts and save you thousands of dollars! Check out myairbags.com

[@hali2758]

Allo

[@MyAirbags]

Hello, what can we help you with?

[@bother1844]

Everything but how to remove a fender? no good thumbs down

[@MyAirbags]

Raymond, Thank you for your honest feedback.