How to remove the front headlight BMW E46 330ci 325ci

[@elliot330]

10 years later and still the best video. Thank you.

[@bimmermerchant]

Thank you for that great feedback. Please share our channel with anyone that would benefit from it.

[@hidden0ne]

The best video on BMW E46 HEADLIGHT removal ever with clear instructions, excellent close ups, and knowledgeable instructor.

[@holdenweese9589]

Fax i just used it to fix my bumper

[@qewee5212]

Do you need to take off the front bumper to remove the headlights?

[@oistein08]

@@qewee5212 nope

[@1BMWdrvr1]

Well described and comprehensive. Thank you for being detailed in your explanations. Folks like you make KZbin a better place.

[@paulrampon1167]

THANK YOU The best I have found for my 325CI. Unfortunately I changed the ballast and bulb and it worked for just one day.

[@scottd1489]

Best e46 facelift video 10 years later

[@bimmermerchant]

Thank you for the great feedback and for watching our video. Feel free to share our Channel to anyone that could benefit from it.

[@dougl867]

great video, thanks for posting this, I tried to do this before the video and could not figure out how the side clip work, thanks agian for such thorough video with great detail.

[@bimmermerchant]

Glad our video was helpful. Be sure to subscribe for more DIY Videos.

[@doodledo5226]

That means I have to take off front bumper?

[@Jestarr9000]

Really Great video, very clear and easy to follow, helped me a lot and saved me breaking trim , thanks

[@brainfleming8756]

You really do a better job than all the others.

[@bimmermerchant]

Thanks you

[@jonny3522]

Thank you for a clear guide, I was struggling to understand how it was bolted in and was worried about breaking plastics

[@bimmermerchant]

Thank you for watching our channel, for the feedback. Feel free to share with anyone that could benefit from it. Hope you're already following us.

[@midnightpassion43]

I love the website, better prices than the Original Bmw Prices. Gonna tag this in my email. Thanks for the video

[@bimmermerchant]

We compare competitors prices before posting and we strive to be more affordable as long as it makes business sense. Can't give parts away. Thanks for your support.

[@midnightpassion43]

That's understandable.

[@Jbabzie]

I want to switch lenses . I have a2005 330ci. Ordered the Lens but do you know if these are the ones that are glued ?

[@quientinwilliamson7731]

this is the best instructional video I think I have ever seen that was crazy good. good job

[@bimmermerchant]

Much appreciated. Be sure to check out our website for all your pre-owned bmw parts: www.bimmermerchant.com

[@PoughkeepsiePete]

As everyone else has written, this was a great video. Before I begin the procedure myself, can someone tell me if this removal will trip the SES light?

[@hyphysteve]

I sure appreciate your video its helped me with this very fragile light removal.

[@bimmermerchant]

Good to hear. Thanks for watching. Be sure to check out our website for your bmw parts

[@e90baby]

Do you need take the headlight out to replace the bulbs?

[@atuck6082]

A much better and less damaging way to remove the trip clip as mentioned around 6:53 is to remove to lower splash guard and depress the tab while sliding. Releasing the clip is done by hand. prying the trim will always damage it, even slightly.

[@b.a.cichlids3827]

Does the bumper need to be removed ?

[@shannon4968]

Thank you😊

[@bimmermerchant]

Thank you we appreciate your feedback. Feel free to share our channel to anyone that may benefit from it.

[@ST-42]

Removing the bumper isnt neccessary right? I saw couple of videos who remove only the headlight trim to reach the bolt?

[@thelifeofcoby]

do you need to remove the bumper to remove the headlight assembly?

[@bimmermerchant]

No need to remove the front bumper.

[@Lodreus]

Hi, I hope you be able help me seeing as the video is fairly old. I'm in the process of replacing the bulb but I'm curious to know if there's a way of opening the headlight without baking it? There has to be a way through without a heat gun or use of an oven. Thanks!

[@bimmermerchant]

Unfortunately we haven’t used those methods to remove cover so we wouldn’t be able to offer a solution

[@Jbabzie]

@@bimmermerchant Have you ever removed the lens ? Is there a method you can share ?

[@rredderr]

Great video, but I still have an issue. I have all the screws out, and the trim unsnapped. I can slide the headlight out, but there is what feels like a spring on the bottom holding the assembly in place. I can pull it out about 3-4 inches, but if I let go it pulls back in place. I have the adaptive headlights on my 2004 325ci convertible. Is there something else holding the assembly in place if the lights are adaptive?

[@bimmermerchant]

Seems like your headlights have the water jet used for cleaning the lenses. You need to disconnect the valve from the plastic hose that leads to the windshield washer reservoir.

[@rredderr]

@@bimmermerchant It was the water jet. I was able to get the headlight assembly out by carefully removing it over the the jet. My actual problem wasn't the bulb, starter, or ballast, but two of the wires going to the starter were broken. Maybe from the heat and vibration. I soldered and everything worked again with the original components.

[@Itsalibabafitness]

nice guide! but i have headlight washers.. what do i do with that? i can't take the cover underneath the headlight off

[@auck1969]

Your tutorial videos for the 300ci zhp are unbelievably detailed. Thank you for taking the time to show us how to do things the proper way without the headaches or destroying delicate parts. 👍🤙🫵

[@bimmermerchant]

Thank you for watching our channel and the feedback, appreciate it. Feel free to share it with anyone that could benefit from it.

[@jeffbrewer8810]

Well done video. Thank you.

[@MrDtaylor16]

Great informative video. Like your style man!

[@gregorydavis2568]

excellent video! very informative

[@movinginstereo44]

Thank you. Worked perfectly.

[@Wikd-Z]

Very well presented video. Good detail & explanation.

[@alejandrozamora5247]

Is this necessary for just changing a xenon headlight bulb? I see other videos and they don't even disassemble like this at all. Still a good video though thank you.

[@Russellrks]

Can you just replace the lens on this assembly?

[@seanmarquez5966]

I was told there was a ballast and an "igniter". Is the igniter one of the boxes shown or is it located elsewhere on the headlight assembly?

[@bimmermerchant]

Igniter holds the high intensity D2S bulb and is found inside the housing. Ballast is usually found on the outside lower part of headlight.

[@seanmarquez5966]

Thank you! Subscribed. :)

[@hansg562]

Well done! Thank you!

[@dz1904]

Does the projector bulb have a coating on it and what happens when I wipe it off

[@memeagain4106]

i got the same headlights and i want to fit halo led lights (angel eyes) does the clear plastic cover come of the front of the headlamp? id like to clean the inside as well? .. thanks for upload

[@bimmermerchant]

+Viney Chawda negative, cover does't come off

[@memeagain4106]

+bimmermerchant ok thanks

[@bimmermerchant]

No problem

[@Yoshimatsu414]

Nice video man. But one question, do you know if the clear plastic lens on the front of the assembly is held on by clips and is removable? They are starting to get a little cloudy on my e46 325ci and I just assume that if I can get them off I can clean them or just replace it.

[@bimmermerchant]

+Yoshimatsu414 As far as we know, front lense covers cannot be removed.

[@crremedies7783]

i have a 05 325ci driver side headlight went out and a month later the pasenger side started flickering now is out so i changed the bulbs and the dont work do you think its the ballasts and do you have them

[@bimmermerchant]

if bulbs didn't fix issue, ballast would be next part you would need. Check out our website for ballast: www.bimmermerchant.com

[@josecolin5026]

Does this control module that you guys sell on you’re website work for a 328i bmw e90 sedan ?

[@bimmermerchant]

remove your module, compare part #'s with parts in our website. If part #'s match, then module should work.

[@RoyJNg]

Do you have a video on how to change the light bulb itself?

[@bimmermerchant]

no

[@paulwongct]

How do you remove the lens cover on the adaptive headlamps so I can replace the turn signal bulb? Do I have to remove the entire light module? Thanks.

[@andrederilus7612]

Paul W did you figure out how to remove the lens?

[@jokij4030]

@@andrederilus7612 u need to heat it up its glued

[@aramtaylor8346]

Great video ist posible to remove the lense fron headlights ,thanks

[@michaeljamesallcock4037]

Great video

[@rkthoka]

hi, I bought 2004 330ci, passenger side low and head beam both are not working. But when I DIP/blink it is happening. what would have been wrong? to Replace bulb do I need to take out the whole assembly?

[@bimmermerchant]

You don't have to remove whole headlight assembly however, we would recommend it. You will be able to insert bulb properly and risk hot bulb touching side plastic walls and burning through it.

[@rkthoka]

Thank you I am able to take out and my surprise it was compromised, I see pre-owner solder the wires, and the bulb was broken in peace. I think it was due to impact. well, worst case I prepared to buy used one.. can suggestions where can I get t from!

[@andresmartinez3716]

Excellent video so well done!

[@bimmermerchant]

Thank you. Be sure to visit our website for all your bmw parts.

[@maikbohner94]

Thanks mate! Great Video. Greetings from germany

[@bimmermerchant]

You are welcome. Greeting from sunny california

[@downen1264]

I have an 05 bmw 330ci with adaptive. But the lights on the inner part of the headlight do not turn on at all. High or low beam. What could cause this? I've checked the bulbs and fuses. But to no avail.

[@bimmermerchant]

check your ballast and ground connections.

[@voyager2701]

My low beam and high beam do not work. Sometimes it comes on for a few seconds then goes off and my fog lights come on. I was told I may need a ballast. How do I know for sure or do I need both?

[@bimmermerchant]

does this happen on both lights or just one headlight?

[@voyager2701]

On low beam and high beam on just passenger side.

[@edwardrivas4248]

+Debbie Early what did you end up doing? Because I have the same issue

[@BlueShift2000]

good video, although i would have liked a shorter version. Personally i saw myself skipping every 5 seconds.

[@bimmermerchant]

Thank you for your feedback. We will keep that in mind for our next video. Feel free to share our channel to anyone that could benefit from it.

[@robertwu5025]

great! I have learned something from you each day. Thank you.

[@bimmermerchant]

Glad to hear.

[@crremedies7783]

ok cool for sum reson the high beam only works wen you flash the head light but does not turn on wen you click it on

[@blopez2298]

i have a 2004 330ci and removed all screws but my headlights have an extra piece in the headlight trim, I think its a headlight washer how do I remove it

[@bimmermerchant]

You got me there. I haven't replaced any headlights with the headlight washers therefore I wouldn't be much help there, sorry. Will do my own personal research and get back to you. Thanks

[@starkycarrillo]

I need to regulate the lights in bmw330 ci 04 how i do tha

[@santiagoivan4968]

Very understandable, Thanks!

[@bimmermerchant]

Glad we could help. Be sure to check out our website for all your pre-owned bmw parts. www.bimmermerchant.com

[@polizei16]

Still a great video, thanks!

[@bimmermerchant]

Thats what we like to hear. Thank you. Be sure to check out our website for all your pre-owned bmw parts

[@misraelnieves4164]

Thanks you are a master 💪👍👌

[@bimmermerchant]

Thanks for watching. Please visit our website for future bmw parts needs

[@Asank6969]

Great help Thanks for support

[@bimmermerchant]

thank you.

[@crremedies7783]

witch ballast do i need i see 2 on each headlight

[@bimmermerchant]

ballast for low beam. Usually the bigger box one

[@MrGoodcat1]

I have BMW E46 330Cd 2005, has the same headlights but it's not xenon, don't know why

[@bimmermerchant]

+Tato Oikashvili BMW is weird that way. We've seen headlights that are halogen as well. Don't know why bmw would manufacture 04 models with halogen bulb versus xenon. Depends on the package the car is equipped with.

[@atuck6082]

It is a way to give customers cost choices. These lights add a few thousand dollars to the sticker.

[@ricardsastotais1706]

bimmermerchant how do you have xenon headlights without headlight washers.every xenon headlights have washers and it’s not an option🤷🏻‍♂️

[@ChancetheCanine]

Thank you for posting! :)

[@bimmermerchant]

Thank you for watching.

[@pompamaster]

So I just gotta buy a whole ass new headlight there’s no bulbs?

[@bobbyiello7066]

trying to get the fucking igniter back on inside that little compartment is the craziest fkn job ever. drove me insane ! why the fuck they designed the trapdoor sooo small drives me nuts

[@bimmermerchant]

we feel your pain. it is a bad design. glad you got it installed

[@bobbyiello7066]

thanks for the great vid too btw !

[@motochiptuning]

Why you remove bumper. No need

[@bimmermerchant]

for video purposes...

[@franciscopaniagua9962]

Does the bumper cover need to be removed?