How To Remove The REAR WHEEL On A Scooter!

[@isaacbasgall6135]

Hands down great video the only one I could find to get an idea of what actually needed to happen. Thank you

[@DRAGNET-pn5vf]

WELL EXPLAINED BACK TIRE REMOVAL WITH A BOARD TRICK FOR A SHORTCUT, WELL DONE. THANKS FOR THE VIDEO!🇺🇲🎉👍🏻

[@chadsimmons6347]

Yes Grandpa's Old-Man, Old School, Antique tool collection, finally did get some use! Buy an impact GRANDPA!!

[@Pv_sMediatrics]

Awesome bro.. thanks for this. I was able to do all that you showed except for that tool that slides the wheel off. Dint have that. But it came off pretty easy. I changed my tire, which was the hardest part of the process. After completion, I went to the tire shop for air. Only for him to take the tire off, wrk on it put it back on with ease and filled it up. I was destroyed!.. but my mission was taking the wheel off which I was able to. Thanks a lot man!! Good stuff!

[@Mordavia284]

THANK YOU so much for the great video, no b.s., very straightforward and helpful, and helped me out of a struggle when I couldn't find anything else on the web about my problem.. (unrelated problem, but you showed clearly the workings of the components and the use of the puller...) . what humility lol and a challenge .... thanks again

[@electronicsNmore]

Glad it helped! You're welcome. Be sure to look over my extensive video playlists below for many other videos of interest to you, and most importantly take one minute to share links to my videos with others on social networking sites. Thank you kzbin.infoplaylists

[@josecasanova7673]

Thanks brother.. It's gonna save my 50.00 buck's in my pocket..🙏

[@electronicsNmore]

Glad I could help! Be sure to watch and share my GY6 scooter video playlist below and share. Thanks! kzbin.info/aero/PLQ6IOhUBblU1bkRJ9MagPsKn_Mekq4ws8

[@michaelmiller6394]

You can take the wheel off without removing the exhaust manifold, just let the air out the tire, you can compress the tire pass the manifold without all the extra work.

[@electronicsNmore]

Probably would work. :-)

[@michaelmiller6394]

@Christian B. Your welcome

[@justinbalaszek4735]

Very helpful thank you

[@damonkeyboy5541]

It helped others but not all as my scooter isn't built this way and yet I was still recommended for this video

[@imjustbetter8959]

boo hoo

[@damonkeyboy5541]

@@imjustbetter8959 here's a tissue man don't cry about it

[@DakotaWarboys]

This has to be the worst comment ever. It's a free service, not a paid mechanic service. Shut up and sewrch for the right video the same as all of us do. Or pay a mechanic and still shut up!

[@edwardjames6070]

mine is a tao tao 150 and I was worried about that rear nut. thanks to you it should be easy.

[@wacekbonapate732]

and I've already learned thanks

[@rvradiofanatic7030]

Great job nice and patience of explaining

[@electronicsNmore]

RV radiofanatic Glad you enjoyed the video! Be sure to check out my video playlists and share. Thank you

[@sambrian5405]

Thank you very much I was gonna do something very dumb if I didnt see this. Great explanation.

[@electronicsNmore]

Glad I could help! Be sure to watch and share my GY6 scooter video playlist below and share. Thank you kzbin.info/aero/PLQ6IOhUBblU1bkRJ9MagPsKn_Mekq4ws8

[@theSirAndy]

Yeah somebody slush both my tires on my scooter looks like a lot of work change a rear tire front tires easy rear tire thank you for the video I'll pay somebody to do my rear tire thanks keep up the good video

[@electronicsNmore]

Sir William Hinely You're welcome! Be sure to rate thumbs up, check out my extensive video playlists, and share my channel with friends. Thanks

[@theSirAndy]

I I got to ask you where to get the pulley

[@hinken24]

if wheel keeps spinning while removing nut you just press rear breaks. use rope tied around handle if you are alone.

[@tectalabyss]

awesome how to video. Soon has I get caught up,I hope to support you through Patreon. Thank you for all the great videos. All the best. Bobby

[@electronicsNmore]

+Bobby Tectalabyss You do enough already. I don't expect you to support via Patreon. That link is for viewers who do not post links, and share my channel, but would like to support my channel with a donation to show their appreciation for my videos. Thanks For Watching

[@roly2868]

My wheels were damaged, my wheels are 14 and these are 13, do you think they fit my scooter, I can't find my size?

[@kylesummers8011]

Useful thanks

[@electronicsNmore]

Great to hear Kyle!

[@joeltamaster]

Thx man only youtube video that helps 👊🏻❤️

[@electronicsNmore]

You're welcome! You can support my channel by watching my "GY6 Scooter" video playlist and sharing. Thank you kzbin.info/www/bejne/a6fPYqCoibt2h5I

[@steve531109]

Nice clear vid . Thanks .

[@electronicsNmore]

+Steve Rhodes Thank You. Be sure to check out my GY6 playlist, rate thumbs up, and share my channel with others.

[@aphalunj]

Thanks. Did not help much but at least you tried. :)

[@RobertdddJones]

I need some advice because my yy150-12 has the brake out the wheel. I’m not sure what wrong but it’s not my belt or motor. My scooter will move either direction about 3 feet then lock up. I honestly don’t know what I am doing just need advice or pointed in the right direction

[@feliperodea8316]

what size is the nut on the axle?

[@tellmesomething2go]

as always. excellent!

[@electronicsNmore]

Thanks Arthur! Be sure to share.

[@tellmesomething2go]

@@electronicsNmore always.

[@frankb1208]

When you take the wheel nut off is there a spacer behind the wheel nut?

[@chriss4365]

Do you have any videos showing how to get the bearings out that are in that plate that slides over the rear wheel?

[@electronicsNmore]

Hello. No. I don't have a video for that, but you should be able to use a large screwdriver and hammer to tap them out, or a socket to remove and install them.

[@lmao-vt3yc]

what do we use to pull the break lining thing off if we dont have a puller or whatever it’s called

[@felicetanka]

I believe grease on all threads is advised.

[@fctryoffetsh39]

do some mopeds have one shock in the back mine does

[@electronicsNmore]

I have no idea, every manufacturer is different.

[@DavidLozano]

Mostly 150cc have 2 shocks, but some manufacturers differ. Wolf brand have 2.

[@tellmesomething2go]

moped has pedals. scooter does not.

[@tellmesomething2go]

@@electronicsNmore my 2014 tao tao, has two. considered a motorbike. 2. 83 hp.

[@carlossanchez8135]

Yes my does

[@willycox6402]

General question before I pull off my tire I rode my 150 home went to pull in and it locked up my rear tire. 2 days later I was just moving it back n forth and it unlocked. Any suggestions?? Maybe rear wheel bearing? Or grease it?

[@electronicsNmore]

It sounds like the gears inside the case that connect the clutch assembly to the rear wheel axle, are damaged.

[@rudyramos3678]

Quick question do you have to add the exhaust cover back on my shock is not connected to that just my exhaust pipe and I'm trying to change it out

[@electronicsNmore]

What cover? If it had one, I'd keep it.

[@claudio67362]

HI there,the wheel takes two spacers or bushings,the big one and a small one,i saw him remove the big one but i never saw the small,can any body tell me where the small goes?thanks

[@electronicsNmore]

It's possible one remained in the metal plate I pulled off. Thanks for watching!

[@claudio67362]

@@electronicsNmore thank you,but just to make sure,on the metal plate towards the wheel side or on the nut side?

[@brendonmay289]

Where do these 2 damn spacers go

[@miguelfernandes5336]

have play in the wheel, could it be the bushing or bearings

[@transmissionjimmy69]

What brand of tire is that & what size? I really like the tread pattern…

[@electronicsNmore]

Kenda

[@bent3]

I have the same set of rear wheels w/drum brakes on my ruckus and like to know what wheel size and bolt pattern I need to get?

[@electronicsNmore]

You'll need to match yours up or look online for Ruckus parts. I no longer have the scooter. Thanks for watching

[@spydernam]

If I wanted to change to stainless where do I get the bolt kit for it?

[@derrickjohnson2463]

What tool are u use to take the tire off

[@BOOGA97]

I need an new bracket, that black price that holds the muffler and houses the axle nut, I onow I'm super late to this, does anyone know where jcan find one?

[@kendogmac]

What size is the nut that holds the swing arm to the rear axle ? I lost mine down the road hahaha

[@GregWorthy]

How do you change the shaft that turns the rear wheel

[@francismella1171]

What's the special tool you used to take the bushing off before sliding the wheel off?

[@electronicsNmore]

Hi there, it's a 2 jaw puller.

[@ElectricExperimentsRobert33]

The muffler gets supplied from the house or you did you put it?

[@electronicsNmore]

Yes. Factory.

[@angeljimenez5406]

Hello. I was trying today to remove the swing arm. And it just would not come out. What is the name of the tool you used to remove it again?

[@electronicsNmore]

I used a puller.

[@AndrewSosa]

My gy6 has a sprocket on it because it was from a quad. How do I set it up for a wheel to be mounted on it?

[@electronicsNmore]

There are many scooter/GY6 forums online that can help you. Thanks for watching!

[@khaliddobashi2446]

Really helpful 👌👌👌👌🤣🤣😄✅✅✅✅

[@electronicsNmore]

Great to hear! Be sure to watch my GY6 scooter video playlist below and share. Thanks kzbin.info/www/bejne/a6fPYqCoibt2h5I

[@eg336]

to the wheel could stop moving have someone hold the breaks or have like a belt holding the breaks

[@NinjaFighterUltimate]

thanks. i have a question my kymco super super 8 rear mags/wheels is very hot after using it. is it normal?

[@electronicsNmore]

Sounds like the brake shoes are hanging up.

[@johndonaldsaspa4029]

What is the size of the nuts on the rear wheels sir? The bigger one

[@maryroberts4602]

I got a 50cc zene scooter from a friend he no longer has the back rim and tire its a 120/70-12 with dics brake, can you help me out please been looking over a month"

[@electronicsNmore]

Mary Roberts Look on Ebay.

[@mdsoto3893]

Mary Roberts Check on eBay they are not that expensive

[@msakhumalo8008]

Kuhle thanks

[@DavidLozano]

Yep ebay or ali.

[@ReklessMusik]

My bushing spins with the wheel, so the right side metal that the muffler was attached to won’t come off. Help !!!

[@electronicsNmore]

Try and find a parts diagram online for your make and model. It will be much easier to see how it comes apart.

[@orangestoneface]

can you drive without the fork plate black supporting axle on right side, gess not , axle can bend.

[@electronicsNmore]

No, very dangerous. Thanks for watching!

[@jeffb6161]

nice, thanks

[@electronicsNmore]

+jeff b You're Welcome!

[@georgewilliams6434]

electronicsNmor

[@geojor]

thank you...

[@onelove8509]

do both bushings go between the rim and the swing arm?

[@electronicsNmore]

One Love You needed to video each stage as you pulled it apart.

[@miguelfernandes5336]

Can you explain this my wheel is with gap

[@darviawhitfield6745]

What if the bolt in the and the is stripped

[@fctryoffetsh39]

thanks

[@electronicsNmore]

You're welcome! Be sure to rate thumbs up, share with others, and check out my other videos. Thanks

[@kevinthorn9672]

What size box wrench?

[@electronicsNmore]

Metric 16*1.5

[@kevinthorn9672]

@@electronicsNmore for a 50cc rx 50 wolf if its strip how also can i remove it..

[@FabianHenri]

Brill video my back wheel made a crunching noise and my wheel locked any ideas as it's only just happened

[@electronicsNmore]

Either a brake problem or broken gear due to a lack of gear oil. Thanks for watching! Be sure to watch my GY6 video playlist, rate thumbs up, and most importantly SHARE.

[@FabianHenri]

@@electronicsNmore Thank you for the reply pal I had all the oils checked out and they said that was fine so I'm hoping the break pads have just shattered inside... just a quick question what's the size of the pulley you used

[@NightFlutter]

whats the number of the offset wrench you used? 4:00

[@electronicsNmore]

Hello. I have no idea. It's been a long time, and I sold the scooter 1 year ago. Yours may be a different size.

[@YouTubersInRewind]

Yea I need to know the sicet or wrench size as well.

[@ResponsiveWeb24]

is this 150cc? i got 49cc and my bracket on the right side is different.

[@electronicsNmore]

Roman L. Yes, 150cc

[@fctryoffetsh39]

ok thanks

[@jackammo9745]

Can this be done without a gear puller? If not how many inch puller is needed?

[@electronicsNmore]

Possibly because it's not on the shaft very tight, but you can buy a puller very cheap at Harbor Freight. Buy one like mine.

[@jackammo9745]

electronicsNmore I got a cheap-o puller from Amazon thanks for the video!

[@HasanALi-lj7mx]

electronicsNmore mine is on very tight and I don't have a puller. please help.

[@goulash75]

Also would like to know how many inch puller is needed.

[@strubbleler]

Hey, i cant get the bolt removed. Its stuck, i used all my might but i cant seem to get any movement in it. What to do?

[@electronicsNmore]

+FunkyWhiteDude They can be a pain in the ass. You probably need someone sitting on the bike while you do it, or you will need an impact wrench. Thanks

[@strubbleler]

i tried it together with my dad, but we coulndt get it done :( for you see, the rear brake is worn out so it doesnt work. our wrench has a curve now ;/

[@electronicsNmore]

FunkyWhiteDude Did you try wedging the wheel so it does not turn? If so, you will need to borrow an impact wrench.

[@andrejplenkovic3296]

Hi, whats the name of tool you use on 5:52? Thanks

[@durrh3784]

Did you figure out the tool

[@andrejplenkovic3296]

@@durrh3784 yes thanks, year ago

[@durrh3784]

@@andrejplenkovic3296 wat was it called

[@andrejplenkovic3296]

@@durrh3784 izvlakač or extractor or pull out tool

[@andrejplenkovic3296]

@@durrh3784 i bought it for 50 euros, wasnt cheap, for only one usage!

[@durrh3784]

What kind of tool is tht

[@electronicsNmore]

Double offset box wrench and 2 jaw gear puller.

[@MedPaz]

What size ?

[@saudanao5600]

Is this yamaha earox 155?

[@electronicsNmore]

No

[@TimmyMahon-l6k]

How to change the rear bearings on a 150 scooter

[@joseph51588]

Where do I find a rear tire

[@electronicsNmore]

Many places online. Search for your tire size

[@alielsheikh8990]

What's the size of the rench

[@electronicsNmore]

Been a while and the bike was sold. I think around 7/8" / 32mm. Thanks for watching!

[@alielsheikh8990]

electronicsNmore thanks

[@newbight]

is that a bahamian inspection sticker on the panel

[@electronicsNmore]

+newbight Yep. Eleuthera, Bahamas

[@stephensummerlin4951]

I need to see where the spacers

[@stephensummerlin4951]

Go on the rear axle.

[@bemil4428]

when i try to remove mine it’s just stuck to the scooter

[@electronicsNmore]

Once the nut has been removed, it should slide off, unless there's a retaining ring also. Try hitting the opposite side of the rim using a rubber mallet as you rotate the wheel.

[@HasanALi-lj7mx]

Why was my wheel so hard to remove?

[@electronicsNmore]

Why was the not hard to remove, or the rear wheel? Once the nut is removed, the wheel should pull forward easily.

[@michaelrellinger3429]

i have a gy6 soccoter and i need the part that the rear shock goes on the right side any one knows ware i can find one

[@electronicsNmore]

mortch motors, ebay, banggood, aliexpress

[@illbefrank123]

same kinda guy that owns no power tools is the same guy that rides a scooter as a daily driver.

[@londonbsing]

i can take everything off but i cant remember how to put it back together. my brain needs help

[@electronicsNmore]

The video should help you.

[@londonbsing]

@@electronicsNmore wheels on.

[@JSchrumm]

It looks delaminated to me.

[@wolfjay1343]

Oh My Godd No Freaking Video Tells You What Size The Rear Wheel Nut Is This Is Ridiculous!!!!!!!

[@electronicsNmore]

Why? Because it's going to vary depending on the manufacturer

[@lovleywilson3421]

😍🥰😘

[@demetriuswilliams4721]

C

[@luzsol1609]

i broke a litle peace of my weel doing this . its aluminium weel : (

[@electronicsNmore]

No idea how you managed to do that.

[@luzsol1609]

+electronicsNmore i am gifted kkk .

[@ssddgaming9583]

What size is that back bolt