How to remove watch links without tools

[@filipposiragusa6806]

Thanks mate! Just sliced the edge of my fingers

[@mvrdamonxy7942]

Lol same ripped the skin right off my index finger.

[@thenewyorkmikeyshow1911]

😂😂

[@adrienotis404]

Pro tip: you can watch series at flixzone. I've been using it for watching all kinds of movies these days.

[@karsynmack2874]

@Adrien Otis yup, I have been watching on Flixzone for since december myself :D

[@hassanshehzad877]

I fucking pined my thumb

[@xcherryrose]

great video! ended up saving my dad time and energy from going to a jeweler. I tried to use an unfolded paper clip at first but that did not give enough resistance when pushing and the metal would bend. Ended up using a sharp tweezer instead and it worked great! My tip is to wear plastic gloves to avoid any scratches on your skin.

[@biblewomen77]

I do watches for a living. He leaves out that you can ONLY remove links with arrows. You have to have the arrow facing down when pushing pin out. When pushing pin in (to put links in)arrow should be up and the pin should have the split or feet at top and round ..flat part at bottom.

[@ledorhassani1109]

ended up breaking the sim pin

[@declan001]

ledor hassani sameeeeee☹️😂

[@tuffzzy4067]

Same

[@YuYu-fp3vc]

same here...

[@morganleafe3152]

Shit lol I’m lucky I guess lol, didn’t have anything else so this got me the dub

[@hugedickerinokripperino5299]

Ya i cant imagine this working on decent bracelets. Especially when the pin is solid

[@notbad5055]

Accidentally stabbed my finger with the sim ejector. LMAO

[@lisahieber920]

Awesome tutorial - thank you! (To commenters: I think he means without Watch-specific tools?) i struggled with removing the pin at first so I used 2 thin rubber grippers(prepworks brand) to hold the watch with one and disk pin with the other and the pin popped right out.

[@skitzvitz]

Bought a new watch this early evening. Really wanted to wear it tomorrow. Realised I didn't have a pin press. Your video was a perfect guide. Used a PC/Phone repair screwdriver set that had a pin bit the fit perfectly. Many many thanks.

[@420hotbox36]

How to use with out a tool: Pulls out a tool.

[@crownmelele9010]

🤣🤣🤣🤣

[@shagstersteiniv285]

this broke my sim ejector tool LOL

[@rako7020]

+Shagsterstein IV Try something harder.

[@shawnh4587]

I did the same thing, a paper clip is to big to use on my fossil blue, I just going to go buy the proper tool to use. So much for saving money lol

[@jom2240]

That won't work buddy it's too short just

[@Streak09]

@@rako7020 can you do a WWE watch band

[@karlbaker1866]

i love how he IMMEDIATELY shows us the tools you need to do this without tools.

[@seriousorganizer]

he meant instead of the real watch tools needed, you can replace with different, & he also stated "or almost" no tools

[@hanegia]

Yeah, like... I knew there had to be some common sense way to remove watch links without taking to jewelry store, and happens I have a metal utensil, (back of spoon, fork, knife, I never thought of!!))... and I DO have a SIM ejector laying around and likely a paperclip would work as well, but I didn’t think of this stuff on my own-

[@thenewyorkmikeyshow1911]

🤣😂

[@n9i9t9h9i9n]

This method worked for me . I took out the pin by placing the sim ejector took on the table with the pointed facing up. Then I placed my seiko watch bracelet on top of the pin so as I could just pull down the strap and the pin would pop out from top. It's very easy way and saves time. Just ensure you are ejecting the pin as per arrow markings on the bracelet. Also once you put back the pin in to the bracelet you don't need a hammer to push it in, just press the protruding pin on the side of a glass table or marble top table.

[@Cay_dab]

I did this and it bent my tool 💀😭

[@MattS-ig2br]

Just got a citizen watch, couldn't find a SIM tool so I went to the sewing kit and found a seam ripper which worked well. Pins, paperclips etc would all break due to the strength of the band pins but the seam ripper worked like a charm.

[@jay3332]

Thanks so much, you saved a 30-minute car journey and £15 for the link removal. Your accent and technique are fucking awesome!

[@rako7020]

+Jay Don't forget to like and subscribe!

[@jay3332]

Subbed and liked my man!

[@rako7020]

+Jay Thank you! Take care of your watch.

[@cms3052]

I can tell that the finger is not the only thing damaged. A very instructional video! Thank you.

[@amaessi8058]

thanks!! a push pin also works for this. I also used the back of it to push the pins back in.

[@emmabarham9681]

Try resting the watch on a towel and tapping the SIM key gently!! with a hammer or something similar so your knocking the pin into the towel. Works a treat! And then you can't hurt your fingers because the object your using is forcing the pin and the pressure goes into the towel not your fingers if you miss or slip!

[@jayb0nd007]

I only watched this video for 30 secs until he used the tools

[@DylansDIYWorkshop]

jeez. I mean it's literally 2 pieces of metal. one big one small. They could be anything. I wouldn't call those watch pin tools. So I agree with the title

[@RayRomanMedia]

Lol what do you want to do snap your fingers?

[@ayonnaconcepcion8392]

fr lol

[@del7802]

bunch of tools who think he actually used a tool. He Didn't!!! Title is correct, except if you're a tool....

[@del7802]

The only tool is the one making the rediculous comment on using tools

[@ifeojoemmanuel530]

I watched your video just now to fix my watch without tools. Thanks bruv!

[@lesson433]

bro you made me break the only sim ejector I got lmao...

[@seanrallis6714]

Don't feel bad. I broke 3. As I mentioned in another comment, this will ONLY work on cheap, poorly made watches with pins that are not fitted well. It won't work on any halfway decent watch.

[@supremeworld87]

@@seanrallis6714 yeah this doesnt work at all.

[@stephenj1118]

Thanks!!!Now I can finally wear my new watch

[@morrisbenfield661]

8/7/2022 bought a watch today. Thank you for this post. I just removed 2 links with ease 😎😎😎👍👍👍👍

[@yusratariq4831]

Can we use needle pins instead of sim ejector? Or a safety pin?

[@deepthigeorge2302]

I succeeded in my first attempt. Thanks bro. It was helpful.

[@morganleafe3152]

Couldn’t find anything else so this actually got me the dub, used one that came with an s10 pushed the tool down on the table/keyboard wrist rest and got em out, only 17 so saved me a trip to the jewellers

[@seanrallis6714]

Great tutorial. Doesn't work with most watches, only very cheap and badly made ones. Anything that cost you more than $50, this won't work. You will break the piece you are trying to use to push the pins out.

[@TheSamosaCritic]

I will subscribe you just for this. Thank you man. You saved me a trip to the watch store and fuel cost. Please keep posting more DYIs like this if u can.

[@adamkamali]

Thanks, man, you saved me a trip to the watch store.

[@oriondragos5876]

Thanks man, just did this with the same sim tool and it worked perfect!

[@ItzYusuf01]

1:48 da struggleeee!!

[@helenprobyn-williams7888]

Absolutely fantastic. Thank you. I used the sim card remover, the first one came out very easily. The second was more tricky. So I used the first one with a small hammer. Success! I used the small hammer to put the pin back in. Thanks again.

[@helenprobyn-williams7888]

Sorry badly explained. I used the first pin to push out the second pin.

[@spin907]

I used a thumb tack, worked great. Thanks

[@rashidaansari9153]

This technique really saved my time and with a single tool work done...thanx a ton

[@veil6yde]

thanks so much! Easiest tutorial ive seen on this!

[@manucotarelo]

Mu watch’s links are quite tight and hard, they won’t come out! What should I do? 😕

[@Eviestars]

You saved my 15$ 😀....thanks brother

[@4dzxk332]

Thank you dude, I had delayed getting my watch fitted before an event which I wanted to wear it at, and your method of using sim ejector oh my god just made my life so much easier, took only 5 minutes with some force for sure to drive it in and back lol.. Thank you

[@SEBASTIV]

Lifesaver. Use a cloth or glove with this tool

[@rasmus2644]

Thank you i got a new watch for christmas and it was too big but now i can wear it!!! :D

[@rako7020]

+Ras Mus Please don't forget to like and subscribe.

[@Tebone-mo6el]

For all of u with sim tools not working try use same cylindrical length paperclip

[@ironlake2]

He did not show the difference between the two ends of the pin and the importance of which end to push out. Also importannt to replace the pin inserting the proper end (the rounded one) first.

[@akafatal]

thanks alot , i been wanting to do this but didnt know howto without the tool

[@MrWANG-do8cc]

most easiest way of adjusting links intire the internet

[@aaronburkegolf5121]

Do you have a video like this for not P.O.S. watches with pushpin links?? Nice watches with a decent quality bracelet has screwed in links

[@cristjay1]

where do you get more links to make the band longer?

[@Iyamargarejo]

just broked the lil metal i use to push☠️☠️

[@Leevus1]

Thanks for the video, saved me from going to a jeweler / etc.

[@Senna-xi1gr]

Thanks but buy a plastic watch vice to hold the watch. They’re plastic so do not scratch watch & it means you don’t stab yourself .👍🇬🇧

[@aj2090]

Now I don’t have to spend money on the watch holder thing. Thanks. But now I have to get the battery replaced.

[@rako7020]

To replace the battery you need the backcover opener. Don't forget to like and subscribe.

[@Crockyfas]

Thanks mate. Saved me so much . Appreciate your help.

[@ajmindigo278]

Wouldn't make more sense to remove 1 link from both sides instead of 2 from 1 side?

[@HW-kf7hi]

Yes I agree. That's what I did to even it up. Found tutorial useful though.

[@pamelafabian2977]

Thank you was very helpful I used a thumb tac!!! Awesome ty lots!!

[@BozaCukuranovic3223]

You save my life and you cant even imagine. much props !

[@christinaharnden2287]

I used the exact same sim card opener & it still won't come out!

[@kylelynn3246]

Same mine snapped

[@makylayy1710]

Awesome vid had to readjust my Rolex

[@dreadedbasket2532]

MagnificentTV lol it's fake definitely . Nobody would remove the links on a real Rolex at home

[@rako7020]

Why not? And by the way. It's not a Rolex. It's a Fossil. Read again!

[@dreadedbasket2532]

Rako Mako not your watch . This guys comment said he had to readjust his Rolex . Nothing about your fossil

[@madhanvasudev7969]

Wow tnx bro 😍😍😍I'm India 😍

[@tazman8697]

I stuck the strap pin into my finger but it worked.

[@ms.chelleg2068]

There are two tools in this video. The little metal thing and the person that titled this video.

[@thenimitpatel]

Thanks so much for this video! Now I can wear the nice watch my fiance got me for my birthday :)

[@scootergirl8615]

I've tried 3 different ways. None of popped the pins out now the tool I used that part is stuck in there smdh

[@CharlesLe-thephotographer]

ScooterGirl86 it the back of the watch band there are arrows that show you which way to push the pins out. He didn't mentioned that important detail in the tutorial.

[@scootergirl8615]

Charles Le yea I know. Use to do it at target but the tool that came with this band was junk and I used a lot of other things to pop those pins out and nada. So i just got a refund. Even the company knew it was an issue smdh

[@MrGrenade121]

Thank you man. That made my life a lot easier

[@ivanvasiliyvich9745]

sim remover broke, so I used a compass needle. Would highly recommend.

[@Stfulnga]

What is a compass needle

[@_______79]

Hamza Khan the geometry one !

[@stansworld266]

I broke my SIM card remover 😂

[@rosapagan2420]

Damn I had that tool but don’t remember we’re I put it

[@arrangallagher4380]

Strong as a glass of water

[@doudouella4683]

Thank you so much 😊 i just tried it yesterday n it worked 😻 it was so easy

[@DecibelAlex]

the sim tool just bends..

[@brynncurry6112]

Thanks! The phone eject tool worked great!

[@tiktokeaglesdad2020]

great video just saved me a bunch of time and money thank you

[@Jerryjerry-di1oq]

Wow semma 🥰 dr

[@NoG-Inc.]

Just want everyone to know, a push pin worked the best for me, I fixed my watch. Like from me!

[@MrCK-il5ci]

Quick and simple tutorial. 🤙thanks!

[@mgcgamesz6002]

I used a pen then pulled it out with pliers

[@jom2240]

Frostbite 8.0 must have some skinny ass pens

[@hanegia]

Thanks Rako! That was awesome!

[@gudlanagendra7635]

Tnq so much it is workout for me.

[@lpj7589]

Thank you so much I really appreciate your help!

[@laureloakley378]

I didn’t get a tool with my mesh band watch so I have no idea how to shorten it! A waste of $40.00

[@syafiqahothman6387]

Thank u for saving my life

[@davishasobers7029]

Worked like a charm. Thank you

[@justinpardo6161]

Sliced my finger and broke my sim tool smh

[@KamFoley]

You have beautiful hands, have you ever considered modelling?

[@MrCK-il5ci]

Hand pervert. LOL

[@melissadavids8280]

This was very helpful 🙏🏻

[@henryserra4746]

Thanks, good practical and functional idea.

[@sloanewoodroffe9658]

Worked like a charm thanks

[@jd6446]

That is a tool...

[@kavitasulia7812]

By "without tool" he meant without the tools which are used to remove extra links

[@evansultemeier8799]

Does not work for my watch

[@InfoBinger]

Thanks you inspired me to make my own tool out of a needle and a pen. I bent the needle and put it into the opening of the tip of pen. I'm a creative mfer.

[@anbuselvan4304]

Its really working tq bro

[@divyaaarumugam3735]

Thank you it's very useful to me☺️

[@romarioroberts8830]

What brand watch is this?

[@rako7020]

+built2win _ Fossil.

[@mazuly2]

It worked for me 😉 thank you!

[@user-yp2kp1mj2q]

My watch's link pattern is totlaaly different and complicated that you can do nothing of that on my watch!!!

[@ridickson4703]

Thank you! Very helpful!

[@humbertoramirez767]

It’s technically not a tool...if you have an iPhone that pin comes with it

[@KishoreKumar-ft7vj]

Thank You 😘

[@alcoyne3333333333333]

Thank you 👍🇮🇪

[@Ariesgoddess626]

Literally says without tools then proceeds to use tools 🙄🤦🏽‍♀️

[@michaeliyen2226]

Thanks bra really helped me

[@richardferguson3965]

You have a cool accent

[@nightguy99]

Quick, simple & easy. Thank-you!

[@derangedemu]

“No tools” Proceeds to use tools... nice.

[@rako7020]

It's an improvized tool, mate. You can't get it out with you teeth. It's like "tools that anyone has home".