(click Read more) Thank you very much for watching and God bless **Chain block hoist 2 ton amzn.to/2Yy5Hxu **Chassis Saver paint amzn.to/2YrY2Az ** My T-shirts diy-jim.creator-spring.com 5% off shirts use DIYJim2021 when checking out Bible ESV easy to read amzn.to/3qshNQP Bible NKJV amzn.to/30ns322 Titan solar generator (large generator) poweredportablesolar.com/ref/48/ Go pro that i use amzn.to/2WC6WXH my wireless mic Rode wireless Go amzn.to/2WxQt7c *Full transparency. I am a participant in the Amazon Services LLC Associates program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
@jamesisom96933 ай бұрын
Thanks Jim.. never would have thought using scaffolding and a chain fall. very ingenious way to do it.
@DIYJIM3 ай бұрын
You bet, thanks for watching
@67polara Жыл бұрын
Flashbacks from my cleaning area in # 1 Engine Room bilge forward and that needle-gun !!!
@DIYJIM Жыл бұрын
Been there done that MM3 on the USS Pensacola, in Little creek Va
@vetteman15422 жыл бұрын
Purchased Scaffolding a few years back when we put our roof on our house with a 12x12 pitch. Now I have another use for my Scaffolding!!
@DIYJIM2 жыл бұрын
Thanks for watching, not looking forward to doing my next roof job lol
@tooltime46403 жыл бұрын
Chassis saver worked great on my f150. Fluid film under coating sprayed over the dry chassis saver works amazing and will last the life of the truck!
@DIYJIM3 жыл бұрын
Awesome thanks for watching. My next video of me painting it came out great
@pnwdrifter5680 Жыл бұрын
Thanks Jim. I'm going to be doing this too. Too many winters with too much salt and sand has rusted the back of my truck bad. But it can be fixed!
@DIYJIM Жыл бұрын
Welcome thanks for watching
@chrisgossen59892 күн бұрын
Great job. Good explanation!!
@DIYJIMКүн бұрын
Thanks!
@CrownOfGoldCompleatSacrifice_22 ай бұрын
Thanks Jim this was very helpful
@DIYJIM2 ай бұрын
Very welcome glad it helped
@LuisC2022 жыл бұрын
Jim thanks for the video. I am in the process of repainting my Tundra and this Helps immensely. God Bless to you as well...
@DIYJIM2 жыл бұрын
Best of luck! Glad I could help
@leicanerd2 жыл бұрын
ThankYou from Rusty Nova Scotia 2014 SR5
@DIYJIM2 жыл бұрын
I here ya not much better here our vehicles rust apart before the engines die. Thanks for watching
@jforeman4111 Жыл бұрын
Nice patient even keeled presentation. Good work!
@DIYJIM Жыл бұрын
Thanks
@marcarnold19556 ай бұрын
Good music……Thanks……now when I take mine off for flatbed build! Helps a lot…..🐕
@DIYJIM6 ай бұрын
Glad my video can help you, thanks for watching and subscribing if you did.
@benschmolze1266 Жыл бұрын
Thanks. Was the bed itself not heavily rusted underneath the liner? Mine is fooked. Needs to come off to repair. Id be very surprised if your bed didnt have issues as when I was shopping for a Tundra every single bed I saw was rotted, inckuding the one I bought with no rust anywhere else.
@DIYJIM Жыл бұрын
It rusted from the underside up. Love my tundra going to buy another one but hope my bed does not rust out again. Toyota replaced lots of beds for free, my bed was good when that happened. Thanks for watching
@richardschachel9711 Жыл бұрын
You made it look so easy
@DIYJIM Жыл бұрын
It wasn’t that bad, thanks for watching
@ttaylor70ify2 жыл бұрын
That was actually impressive
@DIYJIM2 жыл бұрын
Thanks
@liperonus2 жыл бұрын
Were you stationed at camp lejeune, you look familiar.Great video
@DIYJIM2 жыл бұрын
Nope I’ve been deployed to Iraq 08-09 Kuwait 12-13 thanks for watching Jerry
@chargermopar3 жыл бұрын
I had to use my Bobcat the last time I took the bed off of my pickup truck. I removed the bumper and tailgate as well.
@DIYJIM3 жыл бұрын
Thanks for watching I just got done painting my frame
@mikebud88962 ай бұрын
Hey brother can u adjust the bed by loosening the 6 bolts then retighten I have a Toyota
@DIYJIM2 ай бұрын
Not 100% sure but I would guess maybe a little.
@rodneyhouchensful2 жыл бұрын
Heck of a job Sir!!
@DIYJIM2 жыл бұрын
Thank you very much
@patrickcelli1143 жыл бұрын
Jim, next time you need a second person let me know I will give you a hand. Good video!
@DIYJIM3 жыл бұрын
Thank you my friend
@67polara Жыл бұрын
I never bedlined my 2013 but it wouldn't matter the rust came from undernearth not the inside. In the spot-welded areas is where it started.
@DIYJIM Жыл бұрын
You are correct the rust came from the underside. Thanks for watching
@jasonchristman98808 ай бұрын
I had to weld nuts on mine stripped out 4 got to love salt now looking for a used bed mine is shot thanks to pa salt
@DIYJIM8 ай бұрын
Agree Pa winter is hard on our trucks.
@kreyolLA842 жыл бұрын
Very helpful. Thanks.
@DIYJIM2 жыл бұрын
Your welcome
@fks-pv8il2 жыл бұрын
Good job. I have to do the same thing! God Bless!
@DIYJIM2 жыл бұрын
Thanks again
@jabbott314 Жыл бұрын
Jim, Do you know any mechanics who would want to swap a bed out in northcentral pa? My 2008 is rusting around the rails and I do not have the mechanical wherewithal to do this job myself!
@DIYJIM Жыл бұрын
Sorry I do not, I looked around myself. I was thinking about putting a flatbed on my truck. They sell some right near me.
@haulandhurry Жыл бұрын
Great job
@DIYJIM Жыл бұрын
Thanks
@rubenkjbr4 ай бұрын
WHAT SIZE OF BED BOLTS THANKS
@DIYJIM4 ай бұрын
Sorry not sure and don’t have the truck
@haxguy0 Жыл бұрын
Awesome job!
@DIYJIM Жыл бұрын
Thanks Charles
@brendaevaristo25852 жыл бұрын
Do you think 2005 tundra truck bed will fit in 2002 truck?
@DIYJIM2 жыл бұрын
Sorry not sure did the body style change if not I would guess yes. Good luck
@bartbutkis Жыл бұрын
Thanks! Somebody just destroyed the back of my 8 foot Tundra bed in the middle of the night and took off. I'm getting too old for this shit.
@DIYJIM Жыл бұрын
That sucks sorry to hear that. Hope my video helps
@pluto20412 жыл бұрын
Thanks 🙏
@DIYJIM2 жыл бұрын
Your welcome
@Gary8866z Жыл бұрын
Do you know if the 2014-2021 bed will fit 2007-2013?
@DIYJIM Жыл бұрын
Sorry I really do not know. Thanks for watching
@rjva1743 Жыл бұрын
It will fit but the wheel wells are a different shape. Just a cosmetic issue.