How to Repair a Double Glazing Window Hinge

Do you have drafts coming through your Double Glazing, then this video shows you how to replace the hinges. Takes about 20 minutes and can be done from inside the house, no need for ladders. But remember the window can be heavy so you might need someone to help you

[@alanahhannah]

That's what I like to see, someone showing what really happens, mistakes, and all the little things are aren't straight forward, and then shows how to fix them, thank you, very helpful

[@c0neyisland]

Agreed. That's what I was thinking.

[@jeffcyho]

The best real life suspense and drama especially when I thought he was going to drop that window. Fantastic, educational and thrilling watch!

[@vaderd4353]

I was going to pay somebody to come and fit these but after you showed that it can be done from the inside i will do it myself. cheers boss.

[@stevegrace6164]

Thanks very much - you gave me the nudge and confidence I needed to just take the window out. New hinges fitted in no time and yes window quite heavy but now all works better than ever 😃

[@hassymiia6267]

Whats the part where he drilled the holes about? Do you have to?

[@beikdw5762]

@@hassymiia6267 only if the brackets don’t line up with the holes

[@matlockmeat]

I've got the issue on a window where there is a gap between the seal and the frame just like this. How does replacing the hinges fix this? It would indicate the existing hinges are broke/don't pull the frame in close enough? Just trying to understand why a new hinge will fix my problem.

[@Imreadingthisaloud]

@@matlockmeat I’m looking at doing this repair too. Lots of windows in my house have the same issue with the seal. I suspect the wear causes the rear edge of the window to over-rotate due to wear in the pivots making this gap pronounced…now to find a website selling the hinges!

[@mattjones8714]

Thanks Nick. I managed to complete one with screwfix hinges. Thanks for the tips. I would recommend doing the first one at ground level with someone on the other side. That way you get used to it and have the added paid of hands for safety.

[@stephenporter5796]

That's good advice. Just did one with my son and got to see the method. Wouldn't have wanted to do my first one on my own.

[@geoffreycasey875]

I would have cried when the holes didn't line up .😭 Great job..👍☘️🇮🇪

[@alhasan3148]

because you did same mistake he did in first time when he try to fitted

[@davidgould5708]

Last time I was this tense was watching Jaws for the first time as a boy 35 years ago lol Bloody nailbiting stuff

[@stephenporter5796]

Loved the bit at 5.51 where you almost ask the inanimate object to stay where it is

[@Ash_G]

You have no idea how many people (DIY folks) this video will help and save them money too!

[@ShaamoneHeeHee]

Thanks very much for this video mate, it gave me the confidence to do my own after a hinge broke. Couple of tips for anyone wanting to do this. Make sure you can remove a the rusty screws before committing to the project, solve this issue first. Even small widows can be very heavy so remove the glass first, only takes 5 mins. Upvc screws are self tapping so even if your new hinge has different hole placements you don't need a drill, a little force on the screw will get it going. When removing the window leave the middle screw on the upper bracket until last as this will hold the window in place

[@thefabulousstevieg]

Note: make sure the new hinges you get are the same depth as the old ones - or your (in this case 'my'!)window might not fit back in the frame. This means you (meaning 'I')have to put the old ones back on! Also, NIck says "I won't deny the window is quite heavy" - this is in fact an understatement - it it frickin' heavy and tbh it could do with a body on a ladder outside to help take the weight (admittedly Nick says this in the description of the video). A final piece of advice - put a folded up towel or piece of material on the window ledge to stop it getting scratched (and thus requiring repainting...)when you have to put the window down due to it being so heavy (see above comment :D )

[@juliejordan1411]

I don’t think I’ll be trying this for my son’s second floor flat, I can see the window would end up crashing to the ground as I either take it out or put it back 😳

[@AntoniOrszykowski]

@@juliejordan1411 Me and my wife did it on first floor but just to save yourself frustration of not being able to close it after replacing hinges for new make sure they go in as mach as the old one(my require drilling holes).

[@AntoniOrszykowski]

I replaced ours due to bottom one breaking due to rust.(possible gap between window and the frame than was not visible but allowed moisture to get in)

[@AntoniOrszykowski]

I replaced ours due to bottom one breaking due to rust and making it impossible to close.(possibly gap between window and the frame that was not visible allowed more moisture to land on hinges ) yet before I read your comment I was not able to closed it after fitting new hinges no matter how hard we tried. Any way repositioning of hinges to where you said they should have been (new drill holes were necessary) solved the problem. Would be able to tell on windy day how tide it is but look promising. Thank you so much.

[@alhasan3148]

yes, that exactly I said, even he change the gaps for screws hinges, but he doesn't said !!

[@ybloemvo6306]

Like other comments, I appreciate seeing things going not to plan! It's really helpful, thanks

[@alexbrennan1006]

Great Video, very informative, and helpful

[@911moneeb]

Thanks for the helpful demonstration

[@iaincrawford5472]

Great video nick.

[@frederickstevens6415]

thank you for a great way to carry out this task i have been putting this job off and thinking of getting someone to carry out this repair

[@SimpleNickVideos]

Thanks and good luck with your repair

[@dazzamuk77]

Love your videos thanks for your time.😀

[@SimpleNickVideos]

Thanks Darren, need to get back into the swing of this

[@ciarancarroll]

"Storm coming eh? I know i'll replace all the window hinges". You can see why women hate us! ha ha. Great video, cheers!

[@deanoh6414]

I was thinking the same thing. If he had dropped that !!!

[@kathyk7672]

Funny .why he wait till de storm coming. Typical man . 😅😅😅😅😅😅😅

[@j_dv2008]

Wife should be standing outside holding the window.

[@dannybloom]

@@kathyk7672 he works better under pressure 😀🍻👍

[@jsmith704]

😂😂😂👍🏼

[@richardjennison2159]

Great video, thanks!

[@jon...6825]

Thanks very much for sharing and God bless everyone...

[@jimclarke1380]

I re hinged my windows this weekend. Measuring them up is really important. The hardest measurement to take is the depth I recommend removing the hinge and measuring the depth. I was lucky because 13.5mm was all that was available. I guestimated it would be 17mm as I measured it in situ. When I got the hinges out I found out that guess was wrong but lucky me had bought the 13.5mm.

[@allanmason3201]

Electronic read-out micrometres are very cheap these days, and they're accurate enough for normal DIY stuff. Ever since getting one years ago, I've found it amazing how often it's come in useful.

[@dannybloom]

I would follow this man into battle, thank you sir 🍻

[@geoffhanbury4978]

Just done this successfully with Screwfix hinges. When I had removed the window I popped out the beading around the glass and removed the double glazed unit. Much easier to put the window back in without the weight of the glass. When the new window frame is safely screwed down and closed just add the pane back in and put the beading back on. This may not be possible with some very old double glazing where the beads are on the outside of the window.

[@suzyfairbrother939]

Great video.... Has helped us... We have a window like this we want to pop in out garage. Do you happen to have a picture of how you put said window back together. (glass into frame).

[@jospan176]

Just came across this lol. No mention of stack height of the new hinges. It was evident that the stack height was incorrect when the window was offered back in first time. But still a great information video.

[@MrLewieF]

was going to call a guy in but this is perfect , thanks !

[@richardtaylor6440]

Sweet I got to do mine now I thought it was a big job thanks

[@peterryan7827]

As somebody with experience, this is not a DIY job in my opinion but if you have to do get two people, the weight of the sash fully glazed can be very very scary if you have never done this, it is amazing how slippy upvc can be and especially if you are on the second floor,, Also i have had to drill a hole in the new hinge simply because its plastic and the holes wear away, so you drill new holes to get a strong bite again, good video ,

[@geezermcgadgy]

Well done! All without swearing! Reckon I'll be offending the neighbourhood later when I try this! :D

[@disturbedcarrot]

Exact same thing happened with me, purchased nico replacement hinges only to find holes didn't line up. Had to drill new ones.

[@TheRottenICE]

For videos like this it's worth adding an affiliate link, with locations for where you can buy the hinges, would have been happy to have clicked through.

[@logenjoeg9599]

Toolstation

[@ashanidaley4388]

Help needed. What kind of hinges is this?

[@shadydarkside]

about time someone made a real video lol top job !

[@joannewindeatt1779]

Well done 👏

[@chazza234]

Wow right when a storm is coming💃💃

[@johnhales3682]

Nice one Nick.

[@SimpleNickVideos]

Thanks John

[@ronimure1649]

Well done Sir youve done that before I think.

[@jamiecooksey9037]

I am planning to replace several of my friction hinges on our upstairs DG, so thought I would do a little research first. Pleased I came across this video because it shows some of the potential problems I might face and allows me to have the right tools ready. One thing you did not mention is when installing do not mix up the top new hinge with the bottom hinge, as they work differently 👍

[@SimpleNickVideos]

Thanks for the feedback Jamie, and good point about not mixing up top and bottom hinges

[@jedturner9173]

Thanks nick

[@jeffhgv]

Great video

[@SimpleNickVideos]

Thanks

[@RyanPridgeon]

Would it be better to drill the window frame holes before putting the hinges on the window, so you can use them as a guide? Or does it have to sort of find its place once the hinges are attached

[@Theoriginal1981]

I just checked this on youtube as I found my window blowing in air exactly like yours. How do I know what what hinge I need are they all generic?

[@JBishman]

The hinges on my windows were rivetted in and these have failed over time. I have managed to replace a few hinges over the years using rivets but its not been that easy to do or successful. Problem is that the rivet holes are too big to then take screws. Is there a way of using the holes in the UPVC created by rivets with screws or bolts? Something like these ? Or should I pack the hole with glue and then re-drill once set ?

[@Mobile-pd1uc]

I need to change the hinges on a smaller window. Similar to the window on the right. How do you go about buying the correct hinges? Do they come in standard sizes.

[@AntoniOrszykowski]

I had to drill new holes on my window frame for new hinges so like to ask if design has slightly changed of years or it is just standard?

[@SHELBYGT-dj6li]

Hi good video, can you provide a link to buy the hinges. Thanks

[@williamcoates44]

Now this is a truly honest demonstration of doing it yourself. The work is straight forward , fully understandable and comes complete with snags and problems you are going to face. Perhaps one to avoid is do not do it in a storm. Thank you for this honest and successful operation. I will no doubt do this work and know what to avoid . A excellent training guide . I do have one occuring problem I trust I can get the Hinges. Just one thought re drilling holes, perhaps once used screws into plasti do not always find the required bite. good to re drill. Nick Thank you, Excellent Video.

[@SimpleNickVideos]

Thanks for the feedback William, really appreciate it.

[@richardhodkinson1275]

Saved me some £££ Great Vid

[@maiapatryktictocks6529]

Hi, are you replacing top or side hinges as i dont know which one is which one? Thanks

[@flory6901]

Do you know how to repair a window joint ? Could you please make a video of it if possible? Thank you

[@clubsport9118]

Did this today on my wooden DG windows. It was slightly longer job for me as I decided to re-paint frame and also the individual window casements (is that the right word ?). Niggle - had to drill new holes. Used Screwfix hinges and all was well.

[@SimpleNickVideos]

Cool

[@ef7480]

Did you check stack height of hinges?

[@johnw8604]

What I find hard to understand, are the original hinges faulty? If not that means the were installed incorrectly. If I replace with same hinges it will be the same? Here's the problem how can I tell the new hinges are going to cure the problem? Where would you get new hinges from?

[@XStarlight382X]

Hello, how do you know what size you need and where can you get them from please?

[@Zaine22]

Hi there. My window in my house is not closing correctly ,it's a side hung window now on the lock side it's fine but on the opposite end it has about 4mm gap now I have recently changed the hinges as the gap was alot worse before this . Now my question is have I done something wrong when put the new hinges on or is there an adjustment screw I need to alter to bring that side in. Thanks you hopefully you can get back to me as soon as you can .

[@venkatkadam]

I am in exact same situation. After replacing hinges still there is gap on the handle side but the gap on hinge side is closed. Need some help to repair.

[@pauldeakin3413]

Great video but how do you measure the hinges and find the correct ones so you don't have to re-drill holes. Do the hinges just slot into place or is there a certain way to line them up just in case they have to be drilled.

[@mariusdaraban8929]

To me (15 years of fabricating, fitting and repairing pvc windows and doors) this lad is more of a DIY er when it comes to repair windows. He made a huge mistake by letting go of the sash without putting at least one screw it the top hinge, we was very lucky that the sash didn't dropped out from frame. A very important fact is to know the stack height of the hinge you need to replace... 13 or 17mm... and you need to make sure that when you fit the new hinge on the sash, the corner end of the hinge sits at the exact distance from the sash as the old hinge did, otherwise the sash won't close right on the frame

[@Harley-ir4er]

In my limited experience - I would remove the old bottom hinge from the window for measuring the height. Then close the hinge up measure the thickness (height) - Either 13mm or 17mm, then measure the length of the hinge. Even getting the correct lenght doesn't always ensure the holes will line up - Just drill new ones.

[@mickramo498]

some times you can get away with lubing the hinges in the corners and working the window giving it a bit of a slam a few times

[@johnpascall]

This may sound odd but where can you buy these hinges from?

[@geordiehutchy]

Hi, I've got a gap in the exact same spot, but can someone explain how this is caused by the hinge please?

[@billienomates1606]

next time take the glass out before you start as it will make positioning the frame far easier, the glass weighs a lot and the frame is quite light.

[@beverleyolone8116]

I've just replace the hinges on a window same as your. It had a gap at the top. None of the holes lined up and it closes but still has the gap albeit a mm or so less. Where did I go wrong?

[@JG-nx3jg]

Frame might be warped?

[@aron2015]

Great video I have big windows and I wasn't sure how to do it as the professional videos practice on doll house sizes so that was no help. Btw can I not just replace one hinge then I won't need to take off whole window whilst someone holds it.

[@simonbroadhead9997]

I have the same problem even with new hinges

[@ewanjones5591]

How heavy are these windows when taken out? I have a hinge in dire need of replacing but it is nowhere near the ground to get someone outside.

[@borisbolshoi7317]

How do you know what hinges to buy? Is there an industry standard for window hinge sizes?

[@smartgorilla]

Measure and look at the brand. Easy to do

[@hassymiia6267]

@@smartgorilla it's not as easy

[@ryonchero4401]

It's not easy bud, you should de glaze it really which is a pain. Getting it back in is dodgy by yourself and you can easily drop them

[@mickramo498]

hinges come with a stack height 13 mm or 17 mm you can buy 4 mm packers designed for the job for 13 mm hinges

[@ablfc4424]

Brilliant - is there any particular reason why the window does this?

[@sherin1969]

If you are asking why the gap appears between the window and the frame then it is due to the window being forced so wide when opening that it distorts the hinges. I have the same issue in one of my upstairs window which when I left it open slightly on a windy day it was caught by a gust of wind which forced it to open almost beyond the maximum opening capacity of the hinge. This obviously bends the hinge so that you cannot close it fully. Hope this helps.

[@HereIsWhatISaw]

Hello, just wondering, couldn't I just get thicker draft excluder for the hinge side? You know, replace the black plastic/rubber thing?

[@papasmurf9654]

I’ve just replaced all the rubber seals on my windows and now I know I’m going to need to replace the hinges as there is still a few gaps on a couple of the windows

[@j_dv2008]

What had gone wrong with the original hinges?

[@AlekSandra-fn4dl]

I would like to know how to fix exact problem without replacing anything

[@mikehopkins4040]

Good that you didnt cut out the bits and pieces that weren't straight forward.Sometimes problems pop up.

[@yomofo101]

Hi Nick. Not sure if you can help, but. I'm doing this later to a top hung, 960x850mm window with 24" hinges. My only real concern (apart from the weight) is the holes not lining up. I guess when the window is removed. I could close up the old hinges and somehow mark their exact height in relation to the frame before removal. Then fit the new ones accordingly. Or are the top holes always in the same place? Any advice would be much appreciated.

[@SimpleNickVideos]

Hi, sorry just seen this, so hope I am not too late. My holes didn't line up so i had to drill more. On my frame the hinge sat in a lip which helped me hold the window to drill new home. Once you get one screw in things are a lot easier. If in doubt get some to hold the window for you. Hope that helps

[@yomofo101]

@@SimpleNickVideos I did it yesterday. Talk about snags. I had to drill new in the frame and window. Drilled the window and there was metal directly behind the plastic. Drilled through that, then lined up the height of the hinges, went to screw them in place and the screws wouldn't go in! The piece of metal is previously drilled has moved 🤦🏼‍♂️ it was freely moving around inside the window. Then the top screws were spinning, hard to find short fat screws in lockdown. Got that sorted but the hinges were 2mm out on the height and the mushroom cams were scraping the frame when closing the window. Not a huge problem. The new mechanism I bought on ebay and was going to fit has longer mushroom cams. I fitted one on one of my other windows and had to crop the frame to get the window to close, another story. Thanks for your reply 👍

[@pacman4568]

May be fit the hinges without the window attached drill the holes first then put the hinge onto the window and hay presto holes will line up. With an upstairs window, I would like to have someone outside on a ladder, in case I drop the bloody thing.

[@parmindersandhu190]

Great video. Question how do you know where to align the new hinges.

[@smartgorilla]

At the corners

[@mohammedaslam8145]

The metal part that goes on the frame is in the corner. Look at the window part of the old hinge and you'll know where the new one should rest.

[@gunasekarans591]

What is that mechanism???

[@teddyboy252]

Wish you were my neighbour 😊

[@CanonY]

Thank you for your honest video on how to replace a pair of window hinges. This has given me the confidence that calling a professional and fully insured tradesman to do the job is worth every penny!

[@mickramo498]

if internally beaded i take the glass out much lighter then

[@mohammadbilal8642]

Apologies if this is a silly question -if the holes dont align then do you drill the pilot hole in the window through the existing holes in the hinge?

[@SimpleNickVideos]

There is no such thing as a silly question, unless you are a journalist at the daily covid briefing. I put the new hinge in place and drilled a pilot hole through the hinge into the frame. Does that answer your question?

[@Hubzer0]

SimpleNick - Nick Collins you are correct, there are no such thing as silly questions...just silly answers that the government give to journalists/ public at Covid briefings

[@zainmahmood8151]

Nick’s back. Nick could you give us some help regarding your homemade tandoor pots using flower pots? I have a few questions mate

[@SimpleNickVideos]

Sure think Zain, have you sent me a question via my website? To be honest have been hit big time with spam, so might have deleted your request by mistake. More than happy to help, also thanks for the welcome

[@zainmahmood8151]

SimpleNick - Nick Collins thanks Nick. I came across your vids a couple of summers ago. Then last summer I made a tandoor and it worked well, however, had a few issues in the end. I did email via your website, but didn’t get a response so was unsure if it had actually sent. I’ll try again through that link. May be a bit long and less efficient if asking through here. Cheers mate

[@SimpleNickVideos]

I will look out for it this time

[@yvonfem]

Would like you to show us replacing a top hung window on your jack

[@MrJokerh61]

How do you know what size to buy

[@AC-id5ow]

Is there a way to adjust this type of hinge so it closes tighter?

[@SimpleNickVideos]

Not that I am aware, but maybe someone else might know

[@DailyFactFile]

Do you have to order a special size hinge or are they all the same size?

[@TheMiseryIndex]

8 inch, 10 inch, 12 inch, 16 inch, 20 inch, 24 inch are the Uk sizes. Replace like for like.

[@koukouvania]

why are the gaps between the holes always longer(?) or different on the new windows?

[@dannybloom]

The evolution of the window hinge 🙂

[@davidmitchell7714]

Great video. I have a question about the hinges: The ones I’m replacing have small location lugs / teeth on the bottom (or top depending on the end) of the hinge so it almost grabs the frame... the new ones I have bought as replacements don’t have these teeth and I am worried that the screws alone aren’t really enough... But, I can’t seem to find the same hinges (Cotswold hinges). Any advice is welcome! Thanks David

[@thomascharters7516]

Did you ever find a solution to your query? I’m in the same predicament

[@davidmitchell7714]

Thomas Charters annoyingly, no I haven’t. And the more I think about it, I’m convinced I need these locating lugs. The windows are on the first floor flat, overlooking an underground car park... so if they fall out, it’s a long way down! Have found a solution?

[@thomascharters7516]

@@davidmitchell7714 Found a solution - there are updated versions of the hinges I had, I had to contact the manufacturer of the window directly who was able to locate them. They said there are others that would work, but might not be as good a seal! Whether that's their sales lingo or not, I don't know, but the new hinges work.

[@darronroper]

Put some 3mm packets under the hinge. Your replacemen hinges are meant to sit flush with the top and not in the channel of the frame. The feet are basically 3mm packets lifting hinge parallel. If nothing fitted there then the hinge will twist into the groove and not work.

[@jamesw1ll1ams1]

O boy: That was pretty painful to watch but well done for seeing to the end. You should have de-glazed it and used self tapping screws. That would have made everything easier.

[@thomasbliss73]

@Leigh Garfield if the hinges are ok, it might be that the glass unit needs a toe and heel, best thing is change hinges and re glaze with a toe and heel with the window closed so you can line it up. One last thing: not all hinges are the same, you have standard guage and slimline ones also the screws will be in different places, there are fire escape hinges, easy clean, top and side hung, you should only fit fire escape (with or without easy clean function) really on a side hung window like this one, the hinges will say top and bottom on them (most of the time!) make sure you get that correct first time, once forced they won't work correctly you should line up the guide edge on the sash or the sash won't close. Oh self tapping screws, check the size of screw you have in the original and dont go bigger than that including the tapping end!

[@thomasbliss73]

@Leigh Garfield wd40 when dry will make it worse, try gt85 it has a silicone aditive that will last longer. And do that once a year at least!

[@radishpea6615]

what is wrong with the original hinges?

[@TheKingDies]

Great video mate. How much would this likely cost to get somebody in to do it?

[@SimpleNickVideos]

Could question, and one I don't know. I would have thought x times the persons hourly rate, and the price of the parts.

[@TheKingDies]

@@SimpleNickVideos Thank you kindly x

[@randonneurUK]

@@SimpleNickVideos I had someone do two windows £350 - finished in less than two hours. Thats why I'm watching this. Main problem is getting the right hinges.

[@lewiswalker6646]

It’s not really a diy job ,I though you was going to drop the sash a couple of times .. you have some skills tools ect someone watching this with no experience and no tools is asking for trouble trying to do it themselves , I do this daily and often go out to customers who have watched a video making it look easy on KZbin , should be about 85 for a locksmith / upvc doctor to sort this job

[@lewiswalker6646]

Chris Wilby £350 for 2 Opening windows hinge replacement is expensive ! I offer 2 windows for £140 and takes me 30/40 minutes

[@John-pp2jr]

What was the cause of the gap. Is it wear of the mechanism or bad fitting in the first place. A diagram of the hinge mechanism to illustrate how it functions would be very useful to show what the cause of the gap was.

[@piee683]

I would say no one ever gives them a shot of wd40 every now and then ,then they get clogged up with grit and grime that eventually gets stiff causing the arms on the hinge to bend and its then the window doesn't close against the frame.also when the hinge starts to get stiff the pressure comes on the handle causing them to eventually break off,so a little maintenance every springtime helps IMO

[@mrpurpleman9698]

Its the black tiny notch sometimes on the end so when you open and close it does not sit properly move inside the black plastic bit on end, other videos on YT mention this look for this vid:Draughty Window Not Closing Properly! UPVC Hinge Replacement

[@hassymiia6267]

Hi do you have to drill new holes or can you just fit into existing holes of the old hinge?

[@ryonchero4401]

This is why you get someone out to do it.

[@hassymiia6267]

@@ryonchero4401 Such work can be done by oneself. If you bother to use your hands and put mind into it. It's not rocket science. Why pay £50 for it. I Saw him drill new holes. Curious as to why he did that.

[@ryonchero4401]

@@hassymiia6267 EXACTLY! You don't know why he did what he did! And neither did he! It's simple but you don't know. It's all ok until you drop the window. There's a product out there for this job...it's 1100quid...for a reason. Because professional people buy them and do windows all day. I'm glad people have a go at things themselves. But! The reality is he only just managed this without dropping it and didn't know anything about the job and material specifications

[@ryonchero4401]

@@hassymiia6267 it's also not a 50 quid job...it costs more than that for a professional

[@TheMrA38]

If you don't try your hand you don't know what it can do. Good on you and thanks for then info, this hopefully isn't knowing to be the little bit of knowledge that leads me to no mans land when I do mine. Cheers! Good luck going forwards. Comment 74 27th of November 2020 Day 355 of the Apocalypse of Christ. Amen

[@robertfreeman8340]

Is it possible to adjust the hinges without replacing?

[@SimpleNickVideos]

It wasn’t for me, would have been a lot easier option for me if I could

[@papaherms63]

Easy job he said. Frig me I’d have dropped the window drilled wrong holes then replaced it upside down. Interesting though cheers

[@toneskill]

how do u tell what type of hinges and where do you buy the hinges

[@rs-vp7re]

You measure them and get the length you need. You can get them off eBay from window parts sellers

[@0072sy]

Screwfix have a number for sale too, pretty reasonable prices too. The ones I'm looking at are £7 for two.

[@barnabyflynn965]

Hello Nick. Ive got a gap just like that and its making my leg and foot cold where I'm sitting. I thought a simple adjustment might work. Is that not possible? Nothing looks broken. Whats the likely cause?

[@SimpleNickVideos]

Hi Barnaby, I could not see anyway to adjust the hinge on mine, and there was no sign of anything broken. You would think it would be a simple hinge adjustment. In the end I bit the bullet and just changed the hinges. You can see the results in the video, and I am so pleased I did it.

[@stevioAda]

how would replacing the hinge with another hinge the same change anything ?

[@marcusmollyero4210]

With mine, the end catches were broken. They pull the window into the frame. The new hinges have new end catches

[@ChrisHogan87]

How would you identify what length of hinge to get?

[@EddieK563]

Measure the one you have now?

[@SimpleNickVideos]

As Eddie says, I measure the one I had, and Screwfix only sold two types, one for small window and the other for large.

[@andreeaboloca4440]

@@SimpleNickVideos aaah...what happens if there was no hinge at all to measure ? Would it do with measuring an other window's, would I have to take it off as well? Oops.. now I've just seen you took the whole window down which would obviously give me the upper hinge to measure ....still unsure how to measure it actually but will figure it out with a couple of vids and Google images 😁

[@firewizzard86]

Easy job if your window isn't larger than that one but you will need two people for larger windows.

[@MrNooneseesme]

No, I would have to get someone in

[@mufuliramark]

Came here for the repair hinge video and got a replacing hinge video instead.