How To Repair A Honda HRC216HXA Blade Engagement Handle System

Рет қаралды 3,215

Күн бұрын

Пікірлер

@mjlogan2001 5 ай бұрын

Nice video. I have one question. I picked up a used HRC 216. I took apart the rear drive wheels and cleaned everything . Everything looked good. Installed everything in the same order you did. My rear wheels click when rotated in one direction and lock when rotated the other. However, when I engage the drive handle, the bolt in the center of the rear wheel spins, but the mower doesn't move. What did I do wrong? Thanks

@austinado16 5 ай бұрын

Sounds like you have the ratchet pawls facing in the wrong direction. So you either put the pawls back onto the ratchets facing in the wrong direction, or you put the "left" ratchet onto the right wheel, and the "right" ratchet onto the left wheel. I have a video about disassembly and cleaning of the ratchets, here: kzbin.info/www/bejne/m4mmhXirZ5dnicU

@mjlogan2001 5 ай бұрын

@@austinado16 Thank you my friend! That was most definitely my issue. I switched the ratchets from left to right and it will pull you around the yard now!

@austinado16 5 ай бұрын

@@mjlogan2001 Outstanding! I'm so glad you were able to fix it! Great job!

@mjlogan2001 5 ай бұрын

@@austinado16 Thank you for your help.

@austinado16 5 ай бұрын

@@mjlogan2001 You're welcome!

@justinh2221 6 ай бұрын

thank you. do you know the part numbers for the blade engagement pieces (springs etc)?

@austinado16 6 ай бұрын

Part numbers can be found in the parts diagrams on any of the sites that sell parts for Honda mowers. I typically use www.partstree.com www.ereplacementparts.com www.boats.net Your model number is located on the decal at the rear of the mower deck, just rearward of the fuel tank. For example: the machine I'm working on in this video is a: 216HXA K3 MAKA ("K3" = 3rd generation of the 216HXA machine) Parts diagrams are listed in alphabetical order, based on the English translation, of what the assembly is called in Japan. For example; the deck parts are listed as "Cutting Deck" and the blades and blade clutch assemble is listed as "Rotary Blade"