Why is it contracting? Doesn't iron expand when heated? I'm curious about the principle.
@vidicz5 ай бұрын
Honestly I don't know all the technical details about how this works. I know how to use it :)
@miguelgoncalves22493 жыл бұрын
I have a Lidl mashine to!
@vidicz3 жыл бұрын
Nice, how does that work?
@gregorkrajnc82743 жыл бұрын
S katerim hotboxom pa delate?
@vidicz3 жыл бұрын
Ni hotbox, ampak je power PDR box
@nickgallegos4303 жыл бұрын
Great video, only thing I would of wanted to see was how you shocked from bottom while you were doing it.
@vidicz3 жыл бұрын
Thanks Nick. Yes great idea. I would need two cameras for that so maybe in the future :)
@dentq3 жыл бұрын
Thank you for the clip! I am wondering there is no problem for electric devices if parts are not disassembled from the body like you did. Or did you just detach the minus from the battery?
@vidicz3 жыл бұрын
It is definitely safer to detach the car from the battery. However I never had any problems nor did I heard other people had problems
@dentq3 жыл бұрын
@@vidicz Thanks Zan! 😀
@RUS-fb3jw12 күн бұрын
Теперь капот красить с двух сторон😢
@BitcoinMaxy34 Жыл бұрын
My way is better. Heat and sharp tools
@vidicz5 ай бұрын
To each their own :)
@gatflyoz2 жыл бұрын
Do you ever have a large hail dent you are working on with a sharp tip start to oil can? Do you use the power pdr box to fix it?
@vidicz2 жыл бұрын
Yes of course. If the dent is too stretched, it will oil can no matter how sharp the tip is. In that case yes I use the Power PDR box to fix the oil can effect.
@adamhenry5019 Жыл бұрын
Hi Zan, just wondering how you use this when a brace is under the dent and you have no access to the underside?
@vidicz5 ай бұрын
Very hard. If you can remove the brace to a certain degree it may get you access to it.
@victoragresti17773 жыл бұрын
Thanks Zan for Demostration, explained thourghly 🤗
@vidicz3 жыл бұрын
You are welcome 👍👊🏻
@7727777777777773 жыл бұрын
Im a amure someone please ecplain why you cant use a pdr induction box you wouldnt have grind away the paint.
@vidicz3 жыл бұрын
Well the induction box works completely different and it’s not good for shrinking the dents like this
@johncrossley21503 жыл бұрын
That’s amazing. I have used heat to shrink on heavy old car sheet metal. This shrinks and tightens the metal making it able to be a normal push nock down again. Awesome and I know easier said than done. This is a great start to being able to do it on your own. Thank you. Johnc
@vidicz3 жыл бұрын
You are welcome. Yes this machine is really special and it’s a must have :) it pushes your ceiling much higher
@harunozdogan8023 Жыл бұрын
Good work my friend. Is this a welding machine? I want to know that too. Someone said I can do this with a blowtorch.
@vidicz Жыл бұрын
Hi, thank you. Its not a welding machine but it is very similar. It was made especially for this kind of dents
@harunozdogan8023 Жыл бұрын
@@vidicz I live in turkey. I want to know this too. I spoke with a master from Brazil. He said he did this with a battery charger. Another master said that he did this with a low voltage welding machine. I was undecided
@DentZero1233 жыл бұрын
Thank you Zan this helps a lot ! Are those expensive
@vidicz3 жыл бұрын
Hi there. IMHO they are not expensive as they pay for themselfs pretty quickly. You save a panel or two and its paid off
@billcui78273 жыл бұрын
push half way then shirking the result is better
@vidicz3 жыл бұрын
Thanks I will try that. There are many different approaches to this but the end result matters :)
@UY_pdr20203 жыл бұрын
Great job 👍👍 Which tip are you using in the minute 4:30 bringing it up? Sharp?
@vidicz3 жыл бұрын
Thanks. Yes it was a sharp tip tool. A double bend rod.
@UY_pdr20203 жыл бұрын
@@vidicz Thanks Zan 👍
@vidicz3 жыл бұрын
@@UY_pdr2020 you are welcome
@dougdenter3 жыл бұрын
4 bolts, And That hood could be on a hood stand,
@vidicz3 жыл бұрын
I agree...but how is that relevant with shrinking the dents?
@jiddoijkema8883 Жыл бұрын
Is it worth to buy this thing? Im not sure becose of the risk involved withe Burning the paint, en the time consuming this thing is.. whats ur take on this ? Worth or not ?
@vidicz Жыл бұрын
This is not to repair your average dent. This is for shrinking the metal…when the dent is stretched there is not much else you can do. It’s worth it but not for a beginner. I don’t know your skill level but this thing is useful for more complex/advanced damage
@dominikk36773 жыл бұрын
This does not burn the paint?
@vidicz3 жыл бұрын
It can...not if you know what you are doing :)
@karolalbin2 жыл бұрын
Thanks for video Zan. What You think about another PDR box when You working from top? Will it shrink dent like this as well or is it only for soft dents?
@vidicz2 жыл бұрын
Hi Karol. Do you mean the hot box? I had no success with shrinking a dent with a hot box.