A common fault in the older kitchen chairs is that they crack easily. The repair is not hard, and anyone can do it.
Пікірлер: 47
@michaelgraber575010 ай бұрын
Glad i stopped what i was doing and decided to look up videos. I was starting to try to tear the entire chair apart thinking how else am i gonna get glue into that tiny crack. Always a smarter way of doing things.
@tracyakafrog6 ай бұрын
Thank you for the video, Im not sure what type of glue to use. Advice? Thank you
@crimsonwoodworking96096 ай бұрын
I use Titebond 3. It's waterproof and it has more "open" time (time before glue starts to set).
@karengardneralexander5083 Жыл бұрын
I have those exact chair i need to repair. All 4 needs repair
@mourningwarbler Жыл бұрын
Laughed when you said, "Please, don't be glued."
@stevef94722 жыл бұрын
Thanks for the video. It was very helpful. While I haven’t tried it yet with several chairs awaiting similar repairs, I’ve had good luck using blunt injectors to get glue into cracked table tops. I was surprised to find the tight bond glue flowed well even through the smallest needles.
@ruhlworth2 жыл бұрын
Excellent video !!! Thank You very much !!! I have a cracked chair to repair. Your method should work just fine !!! Thanks again. Dave
@owlcity2night18 күн бұрын
The random SpongeBob reference sent me lol
@crimsonwoodworking960917 күн бұрын
@@owlcity2night Yeah, I needed a funnel. 🤣
@joancraig81752 жыл бұрын
You did an amazing job on my chairs. Thank you so much love all your projects.
@crimsonwoodworking96092 жыл бұрын
Love you too! Glad you like them.
@cliveklg77393 ай бұрын
Have some chairs I'm going to repair for splits as well. My problem is cleats won't work, as the bottom isn't straight. The only thing I can think of is adding a wire tensioner to keep it pulled together.
@LSD-42010 ай бұрын
I just picked up six used chairs, two of them have that seat cracking.
@crimsonwoodworking960910 ай бұрын
"You can do it!" (Happy Gilmour Voice)
@michaelgraber575010 ай бұрын
I'm in the exact same boat and I think my chairs are these exact ones in the video
@TheRiches114 ай бұрын
Thanks! I have two vintage wood chairs I've been waiting to repair for years because I didn't know how to get glue in the cracks. Now I have three options
@nailsbylocs2 жыл бұрын
Dental floss!! Amazing!
@padkirsch Жыл бұрын
EXACTLY what I was looking for! Thank you; subscribed
@crimsonwoodworking9609 Жыл бұрын
Thanks for the sub!
@DrMoitra Жыл бұрын
Thanks for the video, nice easy pace and comentary, would have liked to see the finished product with the clamps off the next day.
@joancraig81752 жыл бұрын
If you had a floss threader it would help to go in the crack better
@crimsonwoodworking96092 жыл бұрын
Good idea.
@skippyskippy Жыл бұрын
Thanks! You just saved me a lot of time and hassle!
@georgequalls5043 Жыл бұрын
Got the same problem with a very narrow crack. Tried both blowing and sucking glue but the crack is too thin. Will try the dental floss or just put is aside and wait until the crack widens.
@MichaelWilliams-ro9bm11 ай бұрын
Or, at a vet supply you can buy a hypodermic needle, fill it with glue 50% water 50% and put it where it needs to be. Works great on cracks, crevices.
@jean60612 жыл бұрын
Did you replace the two supports beneath the chair seat?
@crimsonwoodworking96092 жыл бұрын
I didn't. When the glue cured it was just like new. But.. Found out that the client later re-installed the supports. (just incase). This is my 3rd different chair seat repair for this exact problem and there is no need for supports.
@heirborn710 ай бұрын
How do I replace the spindle on that kind of chair that came out but we can’t get it back in
@crimsonwoodworking960910 ай бұрын
This guy explains it. kzbin.info/www/bejne/np_Sk6dom82DfLMsi=lOUBy4EHKYtfRIlF
@nancyjack6066 Жыл бұрын
How do you remove the excess glue? Was there something on your cloth? What stops the glue from smearing all over the wood of the chair. Anytime I’ve wiped glue off it leaves a film. Also, couldn’t understand what the name of the glue was that you used. Is it wood glue? Is it clear drying? Thanks
@crimsonwoodworking9609 Жыл бұрын
Just a wet cloth. Glue is water based and if you don't wait too long you can just wipe it clean. You're correct that it will leave a haze if you wait too long. Hope this helps
@nancyjack6066 Жыл бұрын
Thanks! That’s so easy.!
@mrpickle23Сағат бұрын
why not just use pocket screws/jig
@doncirelli47977 ай бұрын
Hey, my mother has a set of those chairs. She lost one, due to breakage, and she's trying to find a replacement. Would you know who makes that chair, or its model name? Her chairs are that same exact design. Thanks.
@fdort3971 Жыл бұрын
@CrimsonWoodworking...the dental floss works ok but...on another channel I saw the guy using thin syringe needles...works really well! I've also used small paint brushes (it works better with a twisting pulling motion).
@o.k.athomediy5685 Жыл бұрын
Thank you for such a great tutorial!❤
@crimsonwoodworking9609 Жыл бұрын
Thanks
@ronw9901 Жыл бұрын
After the glue is in could use pocket screws in the bottom to pull together
@fdort3971 Жыл бұрын
@CrimsonWoodworking I've come across this issue before I gained more knowledge...would it be a good idea to inlay a bow tie shaped piece of wood over each seam? I'm still learning stuff...
@crimsonwoodworking9609 Жыл бұрын
It would look cool, that's for sure 😊
@ronw9901 Жыл бұрын
Could put glue on the bottom and use a vacuum to pull it to the top.
@MeganJeffery6 ай бұрын
Helpful! Thanks!
@yhofer2 жыл бұрын
Love your video! Your so funny!
@crimsonwoodworking96092 жыл бұрын
Thanks
@octaviobumble5245 Жыл бұрын
I have a clean break all the way through. Can i install dowells and then glue?
@crimsonwoodworking960910 ай бұрын
Biscuit jointer would work better. Sorry this is so late, I I somehow missed your question.