How To Repair Output Flange|The Easiest Way To Fix It

Рет қаралды 64,921

Ай бұрын

How to repair output flange with the easiest way to fix it#KSMechanicalEngineering#abom79 #welding #metalcutting #dumptruck #truckrepair #weldingprocess #machining #machinist #machiningprocess #lathe #manuallathe #manualmachinist #propellerhead #transmission • Gas Cutting Torch Tool... • Mastering Steel Bar Co... • Expert Tips on Industr... • The Hidden World of Tr... • Mastering Precision: T... • The secret to fixing t... • Reveal: Secrets of Clu... • Why Lefthand Thread M4...

Пікірлер: 67

@robertskelton2576 Ай бұрын

Nice job, people don't realize that there's no auto parts store on every corner in some countries.

@jackfrost1031 Ай бұрын

Sometimes you just need it and there isn’t a replacement. Good job!

@Bugsy0333 24 күн бұрын

Or when you have no money ?

@giovannifoulmouth7205 22 күн бұрын

I can promise you that even in countries with auto parts on every corner, they don't have all the parts you need. I needed some simple spark plugs for my extremely common Kia Picanto in Germany and 2 auto parts stores didn't have them, they had to order them. Fuck that, Amazon saved me.

@alanm3438 Ай бұрын

I used to be a laser operator but I admire your skill with the torch and lathe. Good job.

@nineteen-sixty-nine9373 Ай бұрын

Nice job. Would have liked to have seen it drilled ready.

@NO-background-music-in-videos. 7 күн бұрын

Thank you for posting this with the sounds of the work being done.

@KSMechanicalEngineering 7 күн бұрын

Thanks for listening

@kenknerr7226 Ай бұрын

Got to love those safety shoes.

@johnbarker3498 6 күн бұрын

Soon as I see flip flops video over

@KSMechanicalEngineering 6 күн бұрын

Yes

@andrzejporeda7281 Ай бұрын

Przepiękna jest ta zrobiona robota jest ta robota i bardzo super i fachowo. pozdrawiam serdecznie 👍👍👍👍👍👍

@RameshBhalerao-di9xx 8 күн бұрын

Your work proces is best,,, nice

@KSMechanicalEngineering 8 күн бұрын

Thank you so much 😀

@Pete4875 Ай бұрын

Great Job!

@KSMechanicalEngineering Ай бұрын

Thanks for the visit

@makeamericahateagain 11 күн бұрын

That starret eyecrometer

@jorgefernandez-mv8hu 20 күн бұрын

Nice job on that piece. Don't forget to oil the universal joint also.

@KSMechanicalEngineering 20 күн бұрын

Thanks, will do!

@cdrive5757 Ай бұрын

I love that 3 jaw AdjustTrue Chuck. Wakodahatchee Chris

@henrikgrigor384 22 күн бұрын

Better than original one . Well done

@KSMechanicalEngineering 22 күн бұрын

Yes we modify to get more stronger

@olevjorgensen Ай бұрын

I like your safety shoes. 😄

@KSMechanicalEngineering Ай бұрын

Thanks! 😃

@malcolmtill Ай бұрын

What is the ABOM79 in the title for ???

@KSMechanicalEngineering Ай бұрын

Channel mention

@malcolmtill Ай бұрын

@@KSMechanicalEngineering Seems like you're riding on higher ranking and highly skilled engineers coat tails trying to blag viewers from their channels. You certainly can't think you're anything like the mastercraftsman he is.

@KSMechanicalEngineering Ай бұрын

@@malcolmtill Of course i like his work shop and repairing skill

@MegaRiffraff 9 күн бұрын

👍🏻

@UDINTROPHYCHANNEL Ай бұрын

Good"

@MrKingdavis13 Ай бұрын

Imitation is the most sincere form of flattery so I was glad to see a simple job completed in a video without making it a several video series. Lol

@KSMechanicalEngineering Ай бұрын

Yes

@Harry-ll2xm 2 күн бұрын

Didn’t see him drill the holes incomplete video

@KSMechanicalEngineering 2 күн бұрын

Yes Brother i didn’t show that

@sreyleak5035 10 күн бұрын

high quality parts modify❤

@KSMechanicalEngineering 10 күн бұрын

Thanks

@DaveRobinson-xt7uu Ай бұрын

Nice job job does his cutting turntable work, it makes to evenly to be foot powerd

@KSMechanicalEngineering Ай бұрын

Yes

@cameronlilly4814 Ай бұрын

How are you grounding the spindle to avoid damage to the bearings when welding on the lathe?

@KSMechanicalEngineering Ай бұрын

Not at all. But i’m just draft it and then welding out side

@dirtfarmer7472 Ай бұрын

This wasn’t done in the USA

@BrucePierson 20 күн бұрын

Would have liked to see you drill the holes.

@KSMechanicalEngineering 20 күн бұрын

I didn’t show that

@aarondwyer3746 Ай бұрын

The repair is a upgrade on the original part

@KSMechanicalEngineering Ай бұрын

Yes more extra strong

@erniemathews5085 20 күн бұрын

Nice careful work, but weld and skin don't get along.

@KSMechanicalEngineering 20 күн бұрын

Yes, thanks

@WayneCook306 Ай бұрын

Great job but 2 or 3 hours to repair that plus gas and stock for a $20 to $30 part.??

@KSMechanicalEngineering Ай бұрын

For more stronger

@robertskelton2576 Ай бұрын

Try and buy that for $20.00

@KSMechanicalEngineering Ай бұрын

@@robertskelton2576 yes

@Harry-ll2xm Ай бұрын

Would have liked to have seen it drilled ready to fit

@KSMechanicalEngineering Ай бұрын

Yes i didn’t show that

@calholli Ай бұрын

You could have bought that flange for like $20.. lol

@KSMechanicalEngineering Ай бұрын

Yes of course but customer need to modify for more quality

@hayeslose7624 22 сағат бұрын

Fire proof Flip - Flops?

@KSMechanicalEngineering 17 сағат бұрын

Yea brother

@MegaCarloooo 15 күн бұрын

La più

@thepubliceye Ай бұрын

The original had a proud locating ring, but the replacement did not.

@KSMechanicalEngineering Ай бұрын

Yes

@MrProdigious1 24 күн бұрын

The easy way would be to weld another ear on the flange and redrill it. A lot of fooking about there for nothing!

@allancoyne9053 20 күн бұрын

That approach would compromise the structural integrity of the piece as well as potentially affecting the overall balance of the piece. His approach doesn’t introduce those potential problems.

@MrProdigious1 17 күн бұрын

@@allancoyne9053 You’re talking crap!! To be fair, it should be scrapped anyway. You’d only repair something like that to get a job going when you don’t have the spares. It’ll be totally unbalanced and weakened by the welding anyway!!! Which ever way you look at it, it’s a shit repair!!!