How To Replace 2006-2010 Chrysler PT Cruiser Turn Signal Switch

[@davidcomstock2571]

I followed the instructions in this video and it was SUPER EASY. Thank you for this video.

[@papabaer9526]

Auch wenn es schon eine weile her ist, danke für das Video. Toll wie einfach das geht. Danke

[@mickyfinn023]

Thank you. Completed this repair today and now my wipers turn off when I want them to, not when they want to. Great video.

[@jasimine21]

Just saved $300+ thank you. Easy to follow

[@chrono2959]

Thank you sir for your instructional video .your instructions were clear and easy-to-follow thank you very much.

[@SIurmp]

Had some trouble with my switch, found this video and it helped a ton. Thanks so much for posting it :)

[@Jabberjockey53]

Good video, it'll be easy since watching your video. Thank you

[@chrono2959]

I was searching out videos we have a 2007 that the right blinker works but the left one dosen't and I've checked the bulb replace the bulb it's not the bulb and I don't know if there's a fuse or not for the blinker I'm rambling I apologize you made a great video thank you

[@francoismartin361]

Good job ❤

[@batallasnerfmexicocdmx1899]

Tanks

[@kelvinzaiontz44]

Did you remove battery cable before hand?

[@zaintana]

Would this fix the dim switch issue? It only work when turn signal is on, as well as cabin light

[@TheBorchone]

How about wiper motor on 2006 pt cruiser.

[@claudiafilizola5994]

Tenho um desse 2006/2007, sou apaixonada por ele.

[@SilentShane]

I have a 2006 Limited Turbo 8 engine model, an evil evil model you can't find any information for that has a TIPM instead of regular fuse box. My turn signals won't work, and neither will my hazard lights. Saw the multifunction switch had a recall, but would it affect my hazard lights when the button is above the stereo?

[@MartinsUsedCarsCollectiblesLLC]

It might be the Turn Signal/Hazard Warning Flasher Relay. It’s a square fuse available at AutoZone and other auto parts stores. Here is a link. www.autozone.com/electrical-and-lighting/turn-signal-hazard-warning-flasher/p/novita-turn-signal-hazard-warning-flasher-ep35/849390_0_0?spps.s=1078&cmpid=LIA:US:EN:AD:NL:1000000:ELC:19486091402&&CATARGETID=120054150001289080&CADevice=m&gclid=Cj0KCQjwoeemBhCfARIsADR2QCtCYC0cFoKRwu-4-qT2jIZbBSx8qJX-wrKFsUDeVM4eXqBQHZ2MUYsaAnu1EALw_wcB&gclsrc=aw.ds

[@GiGisRoom-CheapAndEasyCrafts]

I have an 07 or cruiser. I want to replace the wiper switch. Would the process kind of be the same? I cant find any videos on it at all.

[@MartinsUsedCarsCollectiblesLLC]

I believe the process is similar. Good luck.

[@GiGisRoom-CheapAndEasyCrafts]

@@MartinsUsedCarsCollectiblesLLC thank you for responding so quickly. I have already replaced the wiper motor and linkage and still no wipers... If replacing the switch doesn't work do you think it could be th tipm? I'm at my witts end with this car. I even had the dealership service dept. run diagnostics on the dang thingband they were no help at all....

[@MartinsUsedCarsCollectiblesLLC]

@@GiGisRoom-CheapAndEasyCrafts Try the switch and check any fuses related to the wipers. Good luck.

[@jasonzelda]

if the turn signal switch is bad would that be the cause of headlights randomly flashing on my Pt Cruiser?

[@greenspiraldragon]

Yeah I have to do this soon.

[@eastcoastcrim]

Would a bad switch cause the rear windshield wiper to cut the car off

[@MartinsUsedCarsCollectiblesLLC]

I don’t believe the turn signal switch would cause the car to cut off.

[@donaldfinkler2490]

Would that be the problem with the rear bulb

[@MartinsUsedCarsCollectiblesLLC]

Probably not the problem with the rear bulb. Check the wiring, the bulb or the bulb socket. Good luck!

[@antonioclark404]

need help!!! 2006 pt cruiser windshield wiper, blinkers, and lights don't work at the switch what can I do to find the problem.

[@JunkTardis]

Did you ever get a solution to this? I am in the same boat...however mine doesn't work if the parking brake is up. If I release it, everything works again