How to Replace a 97 01 Prelude Window Regulator 5th Gen Prelude BB6

[@cartierglizzy6641]

Thanks for this man saved this for when I get the regulator I have to do both driver and passenger side but once I do it’s gonna be working again

[@MrJayDM]

Glad it helped

[@InvaderZim_]

Thank you sir, finally changed my window motor after a year of it being shit.

[@agix666]

Good video. Best one I've found for replacing the motor

[@JaredAllaway]

This looks exactly like my Prelude thank you very much!

[@MrJayDM]

Glad to help

[@playfullysadistic7903]

Thank you for this! Very slow and easy video to follow. Very helpful for a beginner like myself.

[@MrJayDM]

Glad it was helpful!

[@vermasean]

Excellent breakdown; I’m hoping to replace my window regulator soon. 👨‍🔧

[@Eboy_esp]

Does this apply to 4th gen prelude also

[@MrJayDM]

I imagine its the same or very similar

[@khamteh29]

Awesome information. Thanks heaps for sharing!

[@ua7pyro591]

Thank you. Needed this

[@guerreroazteca2501]

Thanks for the video bro! It was great 👍 a lot of help I appreciate it very much 😎✌

[@kenwu7]

Would probably take me 2 hours+ 😂 Great video, edited down to all the necessary stuff!

[@MrJayDM]

Thanks! 👍

[@YoungAmzn]

will this method work on the previous (4th gen) models

[@MrJayDM]

Yes there may be a few minor differences, replacing the window regulators is pretty much the same process on all vehicles

[@YoungAmzn]

MrJayDM thank you.

[@anthonybelton-ford3124]

My window is stuck in the fully up position, I imagine instead of taking the glass out I'd have to undo the regulator first and drop everything and use something to prop it out to get to the bolts to remove the glass??

[@MrJayDM]

That probably will work, I don't remember if you will have enough room to get a wrench on the fasteners that hold the glass to the rail.

[@HypezUpTTV]

did this work?

[@anthonybelton-ford3124]

@@HypezUpTTV Hi, once I took it all apart I found the window could go up and down with some force so it wasnt a problem in the end as I could access the bolts. I needed a second person to hold the glass while putting it all back in to help line the bolts up. Be careful as the metal is very sharp on the edges. I cut myself a few times.

[@anthonybelton-ford3124]

@@HypezUpTTV basically my window wasn't stuck in the up position, the regulator just wouldn't make it go down or up. But you could slide it up and down using your hands.

[@HypezUpTTV]

the thing is my window is up and I can’t see the regulator so I can’t unscrew it, should I try pushing down on my window aswell?