Tools & Parts Necessary: -Listed in Video If you like my videos please subscribe, give me a thumbs up, and share with your friends and family! Thanks for watching, aloha!
Пікірлер: 86
@AlexanderandAaron Жыл бұрын
The shops hate to see this videos. This guy is great. Thank you
@ajaminor183515 күн бұрын
best DIY video I have seen on youtube. no extra BS, But best of all, you started at the beginning- including showing needed tools, and a actually did the ENTIRE project on camera. 2 thumbs up
@RoysGarage80814 күн бұрын
Thanks for watching 🤙🏽🤙🏽🤙🏽
@galva777tx2 жыл бұрын
Straight to the point and very informative. Getting ready to do my booster 22+ years and it decided to finally fail. Excellent video 👍🏽👍🏽
@RoysGarage8082 жыл бұрын
Thanks for watching 🤙🏽🤙🏽🤙🏽
@DonBMW2 жыл бұрын
My guy, thisnis awesome! Great video. So clear, so organized and very well presented. Thanks so much!!
@RoysGarage8082 жыл бұрын
Thanks for watching 🤙🏽🤙🏽🤙🏽
@mailbagps Жыл бұрын
after watching this I thought I could do this successfully, when I tried it I managed in 2 to 3 hours work which is great accomplishment for me. Thank you for your channel.
@jordonwhitson55922 ай бұрын
Yep third video I have used from Roy, he is great. Doesn’t try to be an influencer or add a lot of personality, just does, and explains very well, what we came here to see!
@genevandyke4088 Жыл бұрын
This was great can’t get more simpler then this explanation
@Christiones2 жыл бұрын
I just want everyone to know I JUST completed this repair WITHOUT removing the master cylinder. I will mention that there was some tugging and prying so if trying to do this without removing the master cylinder BE VERY CAREFUL OF YOUR BRAKE LINES!! I managed to pull the booster out and put the new one in no problem and I didn’t have to bleed after! Good luck everyone and remember: All repairs are done AT YOUR OWN RISK. Thanks again for the video sir! Well done!
@cliffordhale10072 жыл бұрын
I did it the same way. It is ridiculous to crack open the brake lines if you dont have to.
@havocjones62702 жыл бұрын
How did you guys dit that way
@luisg1653 Жыл бұрын
Hi Roy, thanks for your videos! I did this yesterday on my 2003 Tundra. It al went smooth except now I have to push really hard to get out of park. The step I missed was adjusting the rod for free play, I think the rod needs to come out a bit.
@yz250ftony3 ай бұрын
Great video, thank you for uploading! Ill be referring to this when i replace mine in a few days.
@mestizoboy Жыл бұрын
Mahalo plenny, uncle. Your videos are *very* thorough and loaded with helpful tips. I have a 98 Gen-1 L4 -subscribed
@eddiea50762 ай бұрын
thank you Roy, this one of the better one out there!
@issacgarcia25773 жыл бұрын
i just did this today on my 98 tacoma sr5 and it works good now ,thanks Roy 😎
@thedevilmusicco.41112 жыл бұрын
This video helped me get started on this same project for my 2000 4runner! Thanks so much!
@RoysGarage8082 жыл бұрын
Glad I could help. Thanks for watching 🤙🤙🤙
@AlexJimenez-rt8xb3 жыл бұрын
Thank you soooo much sir!!!! This was a great video.. helped me out a lot!!!!!
@RoysGarage8083 жыл бұрын
Glad I could help, thanks for watching, aloha 🤙🏽🤙🏽🤙🏽
@samatutahi40323 жыл бұрын
Great video Roy similar to my Hilux, thanks from New Zealand mate
@RoysGarage8083 жыл бұрын
Thanks for watching 🤙🏽🤙🏽🤙🏽
@Christiones2 жыл бұрын
Beautiful video! Saving me money! I’m going to buy a booster and try to give it a go without removing the master cylinder 😁 thanks a lot sir!
@AlejandroGarcia-nb6vr Жыл бұрын
Excellent video I learn something new thank you sir you are awesome I'm going to work on my 2000 toyota tundra blessings.
@juanguerrero572 жыл бұрын
wow awesome video 100% feeling confident that I can do it now thank you for the video and have a awesome day I just subscribed to you today!
@joshuatario775210 ай бұрын
Is changing the fitting necessary from one booster to the other ?
@bryin99 Жыл бұрын
Just replaced my brake booster on my 2001 sequoia. I was having a rough idle issue and would eventually die when stopped. Could not tell why my booster passed a brake test but turns out it was still the problem. I could hear a very slight hiss if I got down under the gas pedal and listened carefully. Easy job to replace you do not need to crack the brake lines just be careful flexing the master cylinder!!
@mornepetersen70032 жыл бұрын
Very clear, thanks!
@RoysGarage8082 жыл бұрын
Thanks for watching aloha🤙🤙🤙
@donkeyrider3 жыл бұрын
Roy you just saved me money. Thank you!
@RoysGarage8083 жыл бұрын
Glad I could help, thanks for watching!!!
@53rdcards Жыл бұрын
For those super hard to get to nuts, get some magnetic socket extensions, they make any normal socket magnetic to hold the nut while you thread it on, really useful around the master cylinder, or anywhere you don't want to drop the nut trying to work your hand to it.
@kentrichwine87943 жыл бұрын
You.nailed it. Thanks!
@RoysGarage8083 жыл бұрын
Thanks for watching!
@taylorbarnes53772 жыл бұрын
Thank you for posting this video Sir. Great job explaining everything
@marxccc3 жыл бұрын
You could also doi it without disconnecting the lines from the master cylinder so you don't have to bleed it later?
@RoysGarage8083 жыл бұрын
Great question, honestly I’ve never tried but I definitely didn’t and don’t want to accidentally bend and kick the brake tubing because it’ll cause some problems like restricting the flow of fluids and such. Also, if you disconnect it, it also allows for more room to replace the booster. Thanks for watching 🤙🏽🤙🏽🤙🏽
@Christiones2 жыл бұрын
Seems like you can but seems like it could be a PITA but maybe it’s less than a PITA than bleeding
@jaimeramirez23953 жыл бұрын
Thanks for sharing your knowledge 👍
@RoysGarage8083 жыл бұрын
Thanks for watching 🤙🏽🤙🏽🤙🏽
@carlosrebollo405 Жыл бұрын
Hey Roy I have an 03 Tacoma I change my booster like ur vid but my pedal goes down to the floor went truck is on . Any ideas sir? Maybe a faulty booster ? Thanks
@Taco18442 жыл бұрын
Awesome! Very detailed tutorial!
@RoysGarage8082 жыл бұрын
Thanks for watching 🤙👍👍
@MrJrobles7773 жыл бұрын
Thank you so much for this video it helped so much!
@RoysGarage8083 жыл бұрын
Glad I could help and thanks for watching 🤙🏽🤙🏽🤙🏽
@WARRIORMU Жыл бұрын
Thanks for your help
@6strings2freedom Жыл бұрын
Thanks, Roy!
@dus-10keale362 жыл бұрын
Mahalo you unko you made this project easy !!! Yessah
@RoysGarage8082 жыл бұрын
Thanks for watching 🤙🏽🤙🏽🤙🏽
@isaiastrujillo3192Ай бұрын
I installed a new break booster and master cylinder. But my problem is when I break on the pedal I feel a clank or pop. Any idea what it can be
@317808941 Жыл бұрын
So you don’t have to drain the system initially or do you? Great video - we have a brake pedal that gets mushy - feels like it has to go to floor on occasion and heard it may be the booster.
@peterhandelson11933 жыл бұрын
Awesome video!
@RoysGarage8083 жыл бұрын
Thanks for watching 🤙🏽🤙🏽🤙🏽
@nicksandoval46182 жыл бұрын
Who makes this rebuilt booster? I’ve tried 3 different Cardon boosters they all sucked. Put a used oem and work perfectly
@josealbertodelaluz74822 жыл бұрын
Thank you very important you video thank you
@RReynoso31654 жыл бұрын
Great video! Thank you!
@RoysGarage8084 жыл бұрын
Raymond Reynoso thanks for watching!
@Nealyanito2 жыл бұрын
You on Maui? I’d like to hire yoj to check out my break system on my 99/2000 Tacoma.
@RicardoHernandez-qr8qb2 жыл бұрын
Super job
@likits19994 жыл бұрын
Awesome video. Very nice job as well. What brand of booster did you replace it with? I may have to to that job to my 01Tacoma soon.
@RoysGarage8084 жыл бұрын
likits1999 I got the brake booster through Auto Zone. Thanks for watching!
@davidkedge86693 жыл бұрын
So, u might have mentioned that a booster push rod adjustment tool is needed to avoid having brakes dragging after you install it.
@RoysGarage8083 жыл бұрын
There is no special push rod adjustment tool, just turn it with your hand or pliers if anything. You need 1/8-1/4 free play. Thanks for watching 🤙🏽🤙🏽🤙🏽
@jakejones57362 жыл бұрын
@@RoysGarage808 I believe he is referring to the brake cylinder side of the booster. I have the original Toyota shop manual for my 86' pickup, and it shows a SST that's used for such measurement. Apparently, you push one end of the tool into the master cylinder to set the depth of the other end that will fit flush to the new booster housing while just touching the rod. You adjust the rod to make that happen. When I change out my booster, I think I will just measure the end of the old booster rod to the flat part of the housing, and then adjust (if needed) the rod on the new booster to match.
@seekNdestroy2x42 жыл бұрын
Thank you!
@tylersmith293 Жыл бұрын
Very helpful.
@ishkhnanmasihi8205 Жыл бұрын
thank you helpful
@danilolanzas13 жыл бұрын
I accidentally dropped the spring that goes underneath the steering wheel and didn’t see where it was attached to. Do you know by any chance? I’m trying to replace the booster in my 2004 sequoia
@RoysGarage8083 жыл бұрын
Oh boy! You’re just gonna have to go under and look for some kind of hole or notch, one on the pedal and one on the pin. Sorry I can’t be of more help, unless I have the specific car in front of me, I can’t really say where or show you. Thanks for watching 🤙🏽🤙🏽🤙🏽
@danilolanzas13 жыл бұрын
@@RoysGarage808 I was able to find it! Omg it was easy to install. On the sequoia (2004 2WD or SR5)learn that you don’t have to disconnect the two lines from the master, all you have to do is move it out of the way because there is a lot room to pull out the booster and re install it. Thanks 🙏 for your video, it was a good 👍
@leonidessanchez63983 жыл бұрын
Buen vídeo excelente
@Scrapla13 жыл бұрын
I have a 2007 Tacoma 2wd v6 and sometimes on the highway my brakes will apply themselves. I either have to let the truck sit for a while or unplug the boosters vacuum line which instantly frees them up.
@verdehistory Жыл бұрын
Great video. Your Toyota looks about like mine. Thanks for the great editing too. What software do you use?
@humbertosrperez8 ай бұрын
Awesome
@dannyb.2073 жыл бұрын
If the brake return spring completely falls off under the dash, how do u find where to hook the top part?
@RoysGarage8083 жыл бұрын
Great question, the best I can tell you is that there definitely is a spot for it to be hooked on but you’ll have to physically go under to find it. It’ll either be a hook or a little hole. Hope that helps and thanks for watching 🤙🏽🤙🏽🤙🏽
@dannyb.2073 жыл бұрын
@@RoysGarage808 i took the plastic panel off... just under the steering wheel. Not sure what its called. 4 bolts, 1 screw. Could see everything and hooked it.
@alfredoramirez2574 жыл бұрын
Isn't necessary to check the booster pin is at the correct distance ?
@RoysGarage8084 жыл бұрын
I don’t think I’m understanding your question, are you talking about the front of the brake booster (engine side) or are you talking about the back (cabin side) push rod that attaches to the brake pedal? If it’s the engine side do NOT touch it, it’s adjusted from the factory. If it’s the cabin side, for this specific vehicle you do need to adjust it to have some free play roughly around 1/8-1/4inch and you can reference the video around 13:13 where I show you how to adjust it. I hope that answers your questions. Thanks for watching!
@davidkedge86693 жыл бұрын
@@RoysGarage808 that is an incorrect statement, it is not set at the factory because they have no way of knowing what master cylinder you have on the vehicle. I skipped that step and hsd to take it apart later and use a brake booster rod adjustment tool to set it correctly.
@Kerven012 жыл бұрын
I did everything like that on mine 99 tacoma and now I have a vacuum leak, I can't find it. Help
@crickle473 ай бұрын
Wouldn't you think Toyota could make parts that lasted more than 293k miles !!!