Thank you man! I'm about to replace mine. The nut on mine loosened up slowly. Over time, the valve's crank arm's hole and rotor wore each other out, causing super high and super low air pressure readings. I can understand why the last guy put loctite on it. Good to know not to do that. I was considering it. The valve's crank arm wears out anyway haha. I think the reason why the rod is longer is because of the newer models. Mine's a 2019, the old rod and the new one had the same length. So Volvo probably discontinued the shorter rod. I had to replace that rod last year due to the bottom nut loosening. It caused the stud it screwed onto, to completely wear out and pop out of the crossbeam. At 70 mph with no air in the bags? Lemme tell ya, crazy bouncy ride along with nasty and noisy U-joint/driveshaft vibrations. Overinflated bags will have similar symptoms. But no air was way scarier. Luckily no damage to the driveline. I managed to get to an open lot right away to ziptie the rod to the crossbeam. I expect components associated with that event will prematurely wear out.
@DavidVlogz3 жыл бұрын
Nice bro keep this up these type of videos will help someone down the line for sure
@EddieV193 жыл бұрын
Thanks man !
@omarjailani20432 жыл бұрын
Helping me out big time. I can’t drop my bags valve is stuck
@EddieV1910 ай бұрын
👍
@canadianbeijing3 жыл бұрын
Really like your stayle... Thank you for show us.. From CANADA
@EddieV193 жыл бұрын
Your welcome!!!
@kenkrausse36242 жыл бұрын
Oh to be young, atta boy great job
@6.oooostroke3 жыл бұрын
I think my leveling valve ain't working luckily I found this video leveling arm is not going up I think they wear out smh am gona replace and see what happens good video tho
@MrN0bady2 жыл бұрын
Thx , Greta video , do you have part number for new valve ?
@EddieV192 жыл бұрын
I think it’s in the video somewhere or in the description but if not there then I forgot to put it on and I don’t know the part number anymore
@ericwiesen867111 ай бұрын
Sno suggestion when the new value flips over and dumps the air?
@EddieV1911 ай бұрын
Never heard of that before
@salazar44002 жыл бұрын
Great video!
@EddieV19 Жыл бұрын
Thanks
@eritreanmen13 жыл бұрын
Hey bud whats that part#? Thanks good video
@EddieV193 жыл бұрын
Thank you. I forgot the part number but it’s a common part any dealer should carry it in stock
@eritreanmen13 жыл бұрын
@@EddieV19 OK thanks for your Help and making this Video!! 👍👍👍👌
@EddieV1910 ай бұрын
Your welcome
@treymckenzie39532 жыл бұрын
What’s the part number? I ordered one and it was the wrong one, also does it come with the “T” fittings or did you have to buy those separate
@EddieV192 жыл бұрын
Came with fittings Sorry i don’t know the pump number because I’m that was a while back
@navaro20 Жыл бұрын
When a forklift is coming in the trailer, takes a pallet, goes out and after under the level is leaking air for 30 sec Is it ok this ?
@EddieV19 Жыл бұрын
I think that’s normal , it should adjust accordingly to the weight
@EddieV19 Жыл бұрын
As long as it stops and doesn’t continue
@AlexD-fq5zm3 жыл бұрын
Did you end up with the new one on it? I swear I have had a shake due to it being too long
@EddieV193 жыл бұрын
Actually no I kept the old one , I’m just saying I see the problem that you had with the long one
@rankinhunt938410 ай бұрын
Do u have the part number for that valve
@EddieV1910 ай бұрын
If I do it’s somewhere in that video Other than that unfortunately not
@joshmullins963410 ай бұрын
Yall, what does ei go to? I got dump, c1 and c2 but don’t know what ei goes to. I’m replacing an older model. For clarification I’m replacing an older model Leveling valve, this is the part Volvo gave me
@EddieV1910 ай бұрын
That’s weird maybe they gave you wrong one. You could have a different design
@AlexD-fq5zm3 жыл бұрын
I wish I had kept my old leveling valve rod. New one is too long
@EddieV193 жыл бұрын
Yes had that happen to me
@-LIONHEART2 жыл бұрын
Do I need to change it if I feel a rattle when I let go of the pedal?
@EddieV192 жыл бұрын
I think your rattle is something else
@-LIONHEART2 жыл бұрын
@@EddieV19 I feel and hear a grinding sound when I’m almost fully stopped while pressing brakes. Not sure if it’s connected to the vibration when letting off the throttle.
@EddieV192 жыл бұрын
Sounds like a break issue
@-LIONHEART2 жыл бұрын
@@EddieV19 I appreciate you replying thx man I’ll check em out
@EddieV1911 ай бұрын
Did you end up fixing your issue?
@paullogan9960 Жыл бұрын
I notice something. Are you changing a DUMP VALVE OR A LEVELING VALVE?
@EddieV19 Жыл бұрын
It’s called leveling valve
@JoseHernandez-ez6sd2 жыл бұрын
Do you know the part number?
@EddieV19 Жыл бұрын
Yes , if you watch my video its posted in one of the pictures I believe
@isdsaw7928 Жыл бұрын
👍
@EddieV19 Жыл бұрын
👍
@vrtshine48293 жыл бұрын
😎👊👊👊
@EddieV19 Жыл бұрын
👍
@habtomghebremedhin9829 Жыл бұрын
The recording wasn’t good enough to show what exactly you were doing