How to replace a Mixit Shower cartridge Easy Beginners Guide

[@jasonjojola496]

I've viewed several video's on replacing the Mixet shower valve. You are the first to mention having the valve in the open position when removing and same while installing. Master bedroom shower no problem replacing with the valve closed or open position. Kids shower was an animal, valve had to be in the open position to install or it was a bear trying to get in. These little tips go a long way, thanks!

[@PlumbingExplained]

You are very welcome man Im glad that I was able to help you out with the tips and tricks i provide in the videos. I been doing this a very long time and I really enjoy helping people so comments like this absolutely make my day thank you!! Make sure you subscribe ive got some other videos with really good tips and tricks on the trade that might come in handy in the future. Take care stay safe!!

[@chroyLee]

This video is 4 years old and you're talking about getting to 500 subscribers now you're up to 87k that's awesome

[@ooopticnerveee]

I just used your video to fix up our mixet shower stall in my parents old home. The hot/cold water adjustment was especially helpful. Feels like it was fixed by a pro! Thanks for your help!

[@grandpadandan8173]

Just replaced ours!!! It was forty years old and came out easy?! Thanks for the great video!!!! 2024👍👊

[@PlumbingExplained]

Glad to help brother, thanks for taking the time to leave a comment, really appreciate it. Have a great day.

[@you2449]

Wow, you were at 475 subscribers at the making of this, 4 years ago. And Look at you now!

[@PlumbingExplained]

Yea this channel has really blown up all of a sudden thanks to recurring viewers like you!!! Thank you!!

[@derekwalsh4583]

This little kzbin.infoUgkxVoi3B4CB6Oygq1-vo4OTL1M_M5JkrXif tub works perfect in our 6 x 6 shower and is easy to get in and out. Also easy to drain.

[@handydaddy4232]

Thank you for the helpful video! My son and I fixed his leaky shower after watching this👍🏻

[@PlumbingExplained]

Thanks man I really appreciate the positive feedback glad I could help!!! Happy Holidays!!

[@SwaggerIsAVirtue]

There is no way he didn't prepare that bonnet to come off that easy! Never in my life has one of those come off so easily on a mixit lol

[@ROK5TAR]

Just replaced mine. Thanks for this.

[@lyndafall8818]

Thank you so much for this video. Love your voice, and your strong arms! This video really helped me fix our leaky shower faucet! Thank you so much handsome man!

[@timothylampley3364]

Your advice is worth it's weight in gold! Thanks!

[@PlumbingExplained]

Thank you!

[@sbe0001]

Must be nice to have it come out that easy

[@valisapps1254]

Thanks you saved me calling a plumber , great explanation!

[@Vista114]

Hello Sir! Just a quick question. The red spot on the cartridge, what is the orientation after shoving it in and tightening, is it top or bottom?

[@johndeyoung9230]

My handle is cracked and spinning around right now. It’s turning off the water however I don’t think that’ll be forever. Can I change the handle to a steel one or do I have to go with a plastic one such as the original

[@pearltimes12]

Hello there... I have this shower handle in an apartment. It's gotten rather dirty under there and i'd like to take off that to top knob to clean it and put it back. Can I do that much without bothering the apartment folks about shutting off the water?

[@PlumbingExplained]

Yes you can remove everything except for the cartridge inside the valve without having to shut the water off below, Remove the Volume control first(the round handle that controls the water pressure) then you may have to slide a small philips inside the lever handle to loosen the screw before removing that piece but often times you can just wiggle it off, Theres only a small philips screw that holds the plate on loosen that and remove the plate but do not remove the sleeve that comes through the plate.

[@Cesardgotx]

Thank you! It was alot fo help ❤

[@KashStackmore]

Just moved into an apartment that has this. It "snaps" over to the left amd instantly goes from hot to cold. We have to set it just right or it will snap over. Can we just replace the handle itself, ourselves, without having to go and shut off the water?

[@PlumbingExplained]

Yes buy the all metal lever from Amazon or a plumbing supply house near you, sounds like that’s what you are dealing with otherwise you might have to replace the cartridge as well.

[@IntRvertDiaries]

Where do i turn the water off in the apartment is it on the outside or in the apartment???

[@lawofficeofrichardpoland5309]

I have been working on this replacement for over a week. It seems the flow control screw is moved when the temperature lever is changed. In the cartridge I removed the temperature control spins freely. Did I get a defective cartridge or did I install it wrong?

[@jjf609]

Also, your vid is the best. Although it's common sense the fact that you stated to turn off the main water & to have lever in open position is very important for beginners to know.

[@PlumbingExplained]

Thank you very much really appreciate your feedback! Sorry took me so long to reply.

[@WoWAdvertisement]

i have stupid mixet valve. what brands of valves can i replace the whole assembly with using the existing piping in there?

[@Cyclopskick]

Alrighty..question! I'm trying to replace my valve. It's currently a mixit valve. But wanting to replace it with another style valve. Would I just follow these steps, and replace it with the correct stem? Or would I have to replace the pipe stuff behind the wall. Any help would be appreciated. Thanks

[@Hoe_Rogan]

This video is a godsend

[@fatmandelarosa]

Thanks man you saved me

[@PlumbingExplained]

Glad to help brother

[@danielstang1295]

The maintenance dude from my apartment came and replace one of those and now i am having a hard time to have hot water to come out is there someting he didnt do properly?

[@PlumbingExplained]

Turn the shower on, turn the lever handle that controls the temperature upside down, then you should be able to move left for hot and right for cold.

[@deborahdamon8536]

Thanks for your video. With this and another, I replaced the valve and got my water off (without having to go outside and shut off the water to the house constantly. Lol) I'm a little confused on putting on the temp paddle. On the valve, there is a groove on the side that the red dot is on. Is the small notch on the paddle handle supposed to go into that groove? There is a small hole on the opposite side so not sure where the little notch on the handle is supposed to go. Thanks so much.

[@SoloSeason]

500 subscribers to 45,000 nice job

[@PlumbingExplained]

Thank you

[@tommyrox]

Any secret to getting temp handle tight? I have tightened the screw and notch is in place but just slips right off...great video!

[@Geovany8756]

Thank you tht wll help me to save a lot of money

[@PlumbingExplained]

You are very welcome!

[@nikkiwanda8861]

What kind of crease would you recommend?

[@jjf609]

What type of grease do you recommend to cover the cartridge thread?

[@PlumbingExplained]

I prefer Black Swan

[@TheBigSherms]

Thank You!!!

[@GlamGoreChaosQueen]

My hex sleeve is beyond messed up. Covered in build up, got that off, and it's stripped on some of the corners, and it won't budge even the tiniest bit. I tried the pb buster, I don't even know how I'd begin trying to soak it in clr. Any advice for me 😭

[@gozillatrade5178]

One thing about these mixit valves, you can't get 100% cold or hot. Cold and hot water are constantly mixed. The temperature adjustment lets get more or less.

[@PlumbingExplained]

Yep you are correct, Thats a very common complaint I have from customers who inherited these with their home. You couldn't pay me to install a mixit valve today haha I know they dont make them but if somebody found one somewhere you wouldn't be able to pay me enough to do that to one of my customers.

[@stephaniecallaway8788]

I hate these things & can't believe my builder put this POS in my house! Master shower valve, just quit & when the plumber came he said I was better off to rip it out & start over.. I was like what? Now I know why! So the Master Shower has set there for over a year & finally going to remodel. Thank Goodness! We are going to resale in next 5 years but I don't want to leave a new owner with any issues down the road should they want to change fixtures & trim... any suggestions on what we should look to when remodeling? Thx!

[@PlumbingExplained]

My favorite shower valves are the *Moen Posi Temp* shower valves you get ALOT of choices for Trim and the posi temp is just one single handle Moen lifetime warranties the cartridge so theyll send you a free cartridge when the original goes bad etc. Delta or Moen Faucets are the best for bathrooms, Delta Faucets are the best for kitchens and Toto Toilets are the best Good luck with your remodel! The world needs more people like you!! Looking out for the next owner thats really rare, really wish more people were like you! Take care!!! -Chris

[@1socalhiker]

so my sleeve is really stuck on there. I rented the place out for 6 years, the corrosion and hard water made it expand, i see 2 hairline cracks on the sleeve shot pb blaster in it still not threading out i just dont want o put so much torque on it that it breaks the supply lines to the valve body in there. any other suggestions? is it possible to break the supply lines?

[@PlumbingExplained]

What I recommend you do is take a large pipe wrench or a pipe wrench with a breaker bar on it to give you some leverage and just crank on that bad boy, the sleeve will normally slide off with some effort but if you clamp it toward the front closer to you and have a good amount of leverage I think you’ll get it out normally in the wall the valve should be strapped so it’s not very likely that you’ll break it unless you feel it’s loose in the wall.

[@PlumbingExplained]

Also I’m in Southern California, Orange County. You can text tomorrow if you’ve got more questions 949-512-5034

[@vperkv6554]

Subbed, Video is good, but i stayed for the pliers. Fcking genius design. Im literally MINDFCK, HOW WELL THE DESIGN IS. WISH I HAD THT PATENT

[@joecochran6343]

Thank you for responding

[@Welovekami]

My sleeve is stuck good. Can’t pull it out. What should I do to get it out

[@PlumbingExplained]

Are you talking about inside the valve? kzbin.info/www/bejne/envTnYSJn9tmd8U

[@AquaLew]

What type of shower handles can be used to replace these Mixet knobs if someone wants a nicer looking set up? Without having to replace all the inner workings behind the knob, hope I'm making sense.

[@PlumbingExplained]

You might beable to find some Universal Shower trims that work for Mixit, Ill look into it for you and leave another comment shortly.

[@AquaLew]

@@PlumbingExplained Thanks!

[@edwardthegreat1382]

Are the short and old long mixet valves interchangeable?

[@PlumbingExplained]

No sir, if you’ve got the longer one you’ll need to replace it with the longer one, the process is all still the same. I’ve only done one of the longer cartridges is 20 years

[@Sandos301]

Thank you very much sir!!

[@PlumbingExplained]

Youre very welcome sir! Glad to help

[@asingh4152]

Any tips on how to lubricate the cartridge? Mine is relatively new. But the rust and calcium from the water is making it hard. I don't want to keep putting new one every year.

[@PlumbingExplained]

Remove the cartridge and spray some CLR into the valve body, then you can take like a 1" or 3/4" wire brush for cleaning fittings and clean out the inside of the valve body then take your plumbers grease and lube up the inside of the valve body and also lube up cartridge liberally.

[@asingh4152]

@@PlumbingExplained thank you. Appreciate your reply.

[@christianmyhre7154]

Good content

[@PlumbingExplained]

Thank you brother take care!

[@LeilaniT_ArianaT]

I replaced the cartridge and I hear a little drip downstairs every time someone showers upstairs. Did I not tighten it enough? I’m afraid to over tighten it and break the whole thing.

[@PlumbingExplained]

If you are hearing a tick noise during or after running the hot water and you have copper plumbing it’s likely thermal expansion. If you aren’t seeing water don’t worry about it, if it doesn’t happen when you only run cold water it’s likely just thermal expansion

[@LeilaniT_ArianaT]

Thank you! I will research what that is.

[@zenitram102]

Are you supposed to move that temp knob?

[@DL-qq4nu]

Hello, my faucet handle looks visually looks very similar to yours? what are the chances they are the same unit? If so where did you buy this unit from can it be bought from amazon or a homedepot? sorry i am plumping iliterate:( mechanic here.

[@PlumbingExplained]

Sorry for such a late reply, you can buy them at Home Depot, Amazon, lowes any other hardware store should also carry them it’s called a Mixit cartridge they make two types a shorter one and a longer one, I’ve only installed one of the long ones in 20 years of plumbing so you’ve likely got the short one.

[@mr.carter3110]

Thank you for this video I was definitely able to save some money!

[@PlumbingExplained]

Youre very welcome bro! Glad to help!

[@danielrivas3397]

Any suggestions on how to remove a stuck sleeve? My plyers have destroyed the sleeve and I can't remover it to get to the stem

[@PlumbingExplained]

Coat in in PB blaster or CLR then take a Pipe wrench, Clamp it down on the very end where it was shaped to be grabbed by a wrench not the rounded part because the rounded part of the sleeve will actually just spin at times once youve got your pipe wrench secured on that baby you should beable to get it off. If you need a demonstration i can shoot a quick video tomorrow just let me know.

[@danielrivas3397]

Thanks!, I'll try it. Most importantly hope you are well? I saw this video before I saw your cancer video. I'm a cancer survivor and wanted to share some thoughts and words of encouragement.

[@PlumbingExplained]

@@danielrivas3397 Thank Daniel! Yea im in remission now as of a couple weeks ago still might have to do radiation but looks like everything is going good!

[@jacaguas9348]

Well done. Any tips on removing the sleeve if the hex portion is corroded to uselessness by mineral buildup?

[@PlumbingExplained]

Only the hex portion needs to be replaced once thats off the sleeve should slide off, they actually come apart when they are very old and broken, Trying using some CLR like spray CLR all over it and let it set for a minute, get the CLR up inside the sleeve if you can. Calcium lime and rust remover thats CLR any Calcium lime and rust remover should work bro. Hope that works.

[@GlamGoreChaosQueen]

​@@PlumbingExplained that's not working for me, and I have the same problem as this guy. It won't budge even the slightest bit

[@playpauserepeat]

​@GlamGoreChaosQueen did you find a solution?

[@christineanddesireecoleman8860]

After installing per video instructions we noticed that the lever pointed toward cold come out hot and pointed toward hot comes out cold. What did we do to cause it to reverse the temperatures?

[@PlumbingExplained]

You just need to remove the handles and flip it around. Should be fine. If you still have trouble let me know I can do a video showing you. My grandmother has one of these valves still

[@arreat123]

Hello! if i have an issue where my hot water from my shower runs for 9 minutes, but then goes cold/lukewarm, is that a mixing valve issue or something else?

[@PlumbingExplained]

Sounds like you are getting cross over, Do you have a hot water recirculating pump on your water heater? It could be a mixing valve gone bad like you said also. Id try and find whatever shower or faucet in the house doesnt seem to have that problem and then change that cartridge and itll solve the problem.

[@arreat123]

Plumbing Explained hi thanks for the response. I have a slant/fin combustion boiler model lx-85a, and it has an accompanying storage tank , not sure if that helps or adds anything to the convo. I’m in an apartment so its the single shower head

[@jjf609]

Best narration of mix it cartridge replacement video. You are give clear & thorough instructions. Are the washers already in the handle and you are just putting it back together or did you buy new washers? Thanks

[@PlumbingExplained]

No It all comes with the new cartridge.

[@FixItWithMe]

Subscribed! :)

[@dee.f88]

Why would the temperature adjust handle spin 360°? Mine is spinning without stopping but turns the water on and off just fine with the front handle, but the water doesn't get very hot and the back handle will spin continuously.

[@PlumbingExplained]

You need to get the all metal trim, the back half(the temperature control) has probably rounded out and is no longer catching the part of the cartridge meant to regulate the temperature.

[@dee.f88]

​@@PlumbingExplained is the handle supposed to catch the metal sleeve that goes over the valve? Or is the catch mechanism located on the interior of the of the valve assembly?

[@nursecc8826]

If i want to temporarily change this style to a modern style in my apartment how would i do that

[@PlumbingExplained]

im sorry Ciara youd have to change your dang entire shower valve or get some aftermarket universal brand that will work for MIXIT.... hope that helps I know it sucks the builders used these friggin valves everywhere and theyve got two choices for trim CRAP OR CRAP

[@debndenver]

Any suggestions for an after market universal replacement?

[@kippalums4958]

A you change the handle to something different?

[@PlumbingExplained]

There’s only one or two other handles for this unit and they’re all ugly

[@Jokerjaxs]

My shower wouldn’t switch of so do I need one of theses

[@joecochran6343]

Can this type be swapped to a hot cold only not a pull and twist??cartridge?

[@PlumbingExplained]

You’d have to open the wall and change the valve

[@larryprieto1989]

Now how do you put the handle back on correctly

[@sergiogonzalez7446]

Not enough detail about positioning of the cartdrige when inserting. What about the red dot

[@PlumbingExplained]

The red dot goes down, The hot should always be to your to your left, if its backwards turn the hande til the paddle is upside down then remove the handle and re attach it so its facing up.

[@kevintorres2986]

Thanks !! 👍🏻

[@robertmartinez1228]

there's a lot of Mixet Showers up here in the High Desert. changed them out off n' on. Like.

[@PlumbingExplained]

Yea they are common builders used them to save money.

[@robertmartinez1228]

@@PlumbingExplained make sense. Question Chris, how much do you Charge for a Job like that? changing out a Mixet.

[@PlumbingExplained]

Robert really sorry i didnt reply man i didnt see your message. I normally charge between $175-$225 for something liek that.

[@debkwart61967]

I am doing this for the third time in the same faucet because I cant get the hot water to flow shower head. What am I doing wrong

[@PlumbingExplained]

You may need to spin the cartridge around sounds like it’s maybe upside down or possible some debris in the valve, pull the cartridge out with the water off of course, then while you’ve got the cartridge out go turn the water on and off a couple times but make sure you’ve got the shower door closed or curtain closed so the water is contained inside the shower.

[@DirtbikeDad]

How do you fix a hard knob to pull out to turn water on ??

[@PlumbingExplained]

Replace the cartridge OR take the cartridge out spray it down with CLR, then grease up all the O rings and reinstall it.

[@JohnJohnson-rl7fq]

When I see how easy it was for you to insert the cartridge, I realized that indeed life is somehow easier for other people! Oh well, time to get a hammer and smash the shit out of it.

[@coltonbarney7901]

Is there a way to change it to a handle?

[@josegarciatapia8562]

What’s the number of the kit

[@s3hooligan]

Having a problem with my install. The cartridge seems to spin on itself …temp adjuster and valve turn together when I open the water. Not sure what I’m doing wrong.

[@s3hooligan]

@D. Kitch unfortunately I was stumped by this one and unable to resolve. We ended up putting the original valve back inside.

[@gozillatrade5178]

I've replaced the cartridge but still have same problem, not enough cold water. Maybe the cold path needs flushing?

[@PlumbingExplained]

Yea id pull the cartridge out and turn the water on a few times to the house for a few seconds at a time, try jolting it like turn it on full blast for 10 seconds then off then back on immediately for another 5-10 and off a couple times. Do that a few times see if you notice anything in the bottom of the shower or tub.

[@gozillatrade5178]

@@PlumbingExplained I turned off the hot water going into the hot water tank and ran the shower. I get good flow. Ok seems like the cold water path is ok, plenty of cold water. I guess these mixit valves do not give you a completely cold or completely hot, best I get is a luke warm?

[@PlumbingExplained]

Gozilla Trade no you should be able to get it steaming hot, I would take the cartridge out and turn the water on and let it try to flush out any debris that might be caught in the hot side port, are you getting good hot water everywhere else ?

[@gozillatrade5178]

@@PlumbingExplained Oh it's not the lack of hot water. I cant' get enough cold water. I do get plenty cold water after shutting off the water heater so the flow seems good.

[@robertocruzjr159]

I replace the valve but the hot and cold are mixed up now can you help

[@PlumbingExplained]

Very easy fix my friend just take the handles off and turn the piece the handle attaches to around 180 degrees

[@robertocruzjr159]

Any way left or right

[@robertocruzjr159]

Thank you 😊

[@PlumbingExplained]

@@robertocruzjr159 glad to help!!

[@global-hellsorosshjt5469]

Metal on metal always causes weakness in the plating... a piece of inner tube or equiv. should always be handy for the visual parts.

[@aircasoh4068]

im lost on how to adjust the temp, please help my showers been cold for 2 days

[@youpremium175]

Same!!!

[@cesarperez2103]

What if your cartridge gets stuck inside ...do they make a puller for mixet...🤷‍♂️

[@PlumbingExplained]

I have another video that shows you how to remove the struck cartridge unfortunately no they dont make a puller im pretty sure the company that originally made the Mixet valves is out of business. Heres the link to my other video hope it helps. Let me know if you have any other questions. kzbin.info/www/bejne/envTnYSJn9tmd8U

[@polocash11]

I cannot seem the find the right cartridge. I bought the metal temp and. volume handles, but they ride on each other. I can't control one without holding the other in place. Sometimes I can't get to point where water is completely off. LASCO HL-59 Metal Chrome Plated Lever Handle Fits Mixet Brand LASCO HC-40 Chrome Plated Volume Control Handle Fits Mixet Brand Both on Amazon. Bought over cheap plastic.

[@PlumbingExplained]

It sounds like you have the more Rare of the Mixit cartridges its longer than the normal ones here is the part #MS3T

[@polocash11]

@@PlumbingExplained I am confused. How many types are there? I see they are all 4 1/2" long. Some sat non pressure and other say post 1968, and pressured. My home is 20 years old and I was trying to change handles. Mine came with plastic ball type and went to metal. www.amazon.com/BrassCraft-Mfg-SKD0216-MIXET-KIT-CHROME/dp/B000NID7S6/ref=sr_1_7?dchild=1&keywords=mixet+handle&qid=1596844266&s=hi&sr=1-7 It shows the SLD1350 as the match. This is post 68 but non pressured. Would a 20 years old valve be non-pressured. Thanks

[@bobloblaw4576]

@@polocash11 I am having the same problem, were you able to resolve the issue?

[@joecochran6343]

If ao do u have a part#plz???

[@Reannee23]

Mine completely cracked off I just know my landlord will charge me for it but I made a notice for repair. It feels so cheap though 🙄 sometimes it would get stuck

[@PlumbingExplained]

Did he atleast have it replaced with a metal one?. Your landlord sounds like an asshole theres now way that was your fault! When these go bad specially with the plastic trim they break!

[@redwood_shores]

1:56 It's so much easier to put the washers onto the cartridge.

[@lioneljohnson3096]

How to adjust the pressure?

[@1105pitbull]

Can't you just turn off the water at the valve, hot and cold behind the plate cover?

[@PlumbingExplained]

Not all valves have the hot and cold stops and I would highly recommend you don’t mess with those stops unless you absolutely have to, I’ve had times where I’ve turned those stops off and when I turn them back on they leak out of the stop at that point what are you gonna do? Unless you’ve already got replacement stops on site you are gonna have to order them because most supply houses don’t carry them, the thread pattern is weird so you can’t just temporarily thread a plug in, so now your either replacing the entire valve or letting the stop drip down into the wall until you get the replacement stops shipped to you. Hope that answers your question @Lovespitbulls

[@danieldesantiagovillalaz9292]

Man everytime I try taking that screw off it twists the valve on how can I get it off with no problems???

[@PlumbingExplained]

Just saw it off bro, youre replacing it anyway get a new handle set while your at it, the back piece is usually rounded out and needs be replaced anyways. saw it off behind the handle, DO NOT SAW INTO THE SLEEVE

[@KaosonaSRRDaniel]

What happens if i dont turn the main water valve off?

[@PlumbingExplained]

Gonna take a shower.

[@KaosonaSRRDaniel]

You got me laughing out loud over here. Is it possible though or is it too much pressure?

[@PlumbingExplained]

@@KaosonaSRRDaniel not possible do not try

[@KaosonaSRRDaniel]

@@PlumbingExplained Thank you very much. My main controls four apartments in my complex so I wanted to see if I can do it without. I appreciate your time

[@PlumbingExplained]

@@KaosonaSRRDaniel if you have the valve that has its own stops you might be able to. Take the trim off see if there are two flathead screw driver lookin ports one on each side of the valve. If you are in an apartment buildings it’s very possible they used that style valve so you can service it without having to shut down the building

[@gustavoreyes3480]

Yeah you probably done it many times but you need to explain how the cartridge goes in, just to let you know the cartridge has a mark you should explain that..

[@naruto21920]

Is there any other type or brand of cartridge that I can replace this brand without changing the pipe or valve behind it? This is a piece of shit and always broken in my house after I bought it new and a few months of use!

[@PlumbingExplained]

Unfortunately man as far as i know you can only replace this cartridge with Mixit cartridges and the Trim is extremely limited so you really dont get much to choose from…. I almost always try and talk my customers into switching these valves out if they can afford it because you are right this is a total piece of shit valve.

[@naruto21920]

@@PlumbingExplained Thank you!

[@PlumbingExplained]

@@naruto21920 you are welcome! Thank you for watching the video and commenting I really appreciate it!

[@markthompson5803]

The video is ok, but you never told us how to orient the mixing valve. I installed mine upside down and had the hot water coming on the right side instead of the left. I had to take it out and flip it.

[@PlumbingExplained]

Sorry about that Mark, red dot needs to be facing up, You don’t have to take it out and do it again though just turn the shower on and rotate the temp handle 180 degrees then turn the water off remove the handles and reinstall the temperature handle in the correct direction and the temperature will be back to normal.

[@boob944]

@@PlumbingExplained Moved into a house with it backwards. Now i know what to do. thanks!

[@kyleb1998]

Hell no if i see this valve im telling them to get a delta 🤣🤣

[@PlumbingExplained]

Hahahaha Delta definitely makes a great shower valve but I prefer Moen!

[@gregbanter3022]

It’s not always that easy friend ‘ I spent 45 mins on one “ pain in the ass

[@PlumbingExplained]

I know Its not always that easy, just trying to share some tips on how to make it easier on yourself. I been doin this a long time, im not trying to down play how hard it can at all, just like anything in plumbing and most things in life sometimes changing this cartridge is a piece of cake, sometimes itll make you question why you do this shit.

[@nedanother9382]

I knew I was in for a fight when I removed the first knob screw and even a hammer and chisel and pry bar wouldn't get it off....nothing a 4" grinder couldnt handle. Everything else went great. Thanks

[@mw2424]

What apartment was that at? Lol

[@turkalpha6884]

My problem is the sleeve on my mixet stem is so calcified and worned down that there's not purchase for my wrench. Is there a way around this? I even tried a plier wrench and manage to wrench off the metal sleeve around the sleeve, I've looked everywhere and didn't know this existed!

[@PlumbingExplained]

The new cartridge comes with a new sleeve, use PB a later and a big pipe wrench with leverage as it’ll come off, just put it on the tip of the sleeve only the tip is screwed down

[@turkalpha6884]

@@PlumbingExplained Yeah, I was afraid I might brake something, so when I screwed off the metal sleeve around the sleeve itself (the main sleeve is still there stuck), I stopped. It's now just an ugly looking sleeve with a wornout/corroded head. So instead of trying to find purchase with the worn out head/wrenchflat of the sleeve, I just muscle it off using a pipe wrench near the tip (after the worned out head)?

[@turkalpha6884]

@@PlumbingExplained THANK YOU! Did exactly what you advised, simple pipe wrench worked!

[@joecochran6343]

I thought maybe just a different stule of cartridge????

[@lex_one-two]

Narration is good but you moved too fast. Didn't show exactly what you were talking about when it came to the valve.

[@PlumbingExplained]

I have another video I’m editing right now I’ll post it shortly!! Same exact cartridge I think a little better video

[@m.r.b.806]

I think this is geared toward other plumbers

[@richsun247]

Save me $125 from plumbers

[@PlumbingExplained]

Always glad to help bro!

[@jacaguas9348]

Jacaguas

[@PlumbingExplained]

Jacaguas

[@tonybeas1357]

I’m a plumber here in Southern California with a lot of competition already and now you show people how to do it on KZbin oh my gosh only for because you want your likes and thumbs up how thoughtful of you😠

[@PlumbingExplained]

How long have you been a plumber? These videos aren’t taking anything away from you and it’s that type of thinking and attitude that holds you back, when you do good enough work, treat your customers properly and don’t price gouge people you will stay busy regardless, I have this channel linked on my companies website that’s how not worried I am about these videos taking work from me.

[@RobertHolck-dw6pr]

Why did you put background music in I cant hear you. Not informative

[@global-hellsorosshjt5469]

Learn how NOT to pop the mic...very annoying....windscreen, distance, talk at angle away from mic.

[@PlumbingExplained]

you're welcome for the free advise on how to fix your plumbing. Very annoying how many unappreciative entitled people are on youtube.

[@dqtrilogy]

Thanks for your informative & helpful video, but there seems to be some inconsistency with the red dot…in your reply to @sergiogonzalez7446 1 yr ago you stated orient the red dot facing down; in your reply to @markthompson5803 10 months ago you stated orient the red dot facing up. I asked my local plumbing store, they said red dot down, I watched another video, he said red dot down..then I actually read the Mixet manufacturer’s instruction sheet and it says “Red mark on the stem assembly must point up.”